Computers and Concrete

  • 제14권2호
  • /
  • Pages.175-191
  • /
  • 2014
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Mechanical properties and durability of self consolidating cementitious materials incorporating nano silica and silica fume

  • Mahdikhani, Mahdi (Department of Civil and Environmental Engineering, Amirkabir University of Technology) ;
  • Ramezanianpour, Ali Akbar (Department of Civil and Environmental Engineering, Amirkabir University of Technology)
  • 투고 : 2013.01.23
  • 심사 : 2014.06.12
  • 발행 : 2014.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

In recent years, the emergence of nanotechnology and nanomaterial has created hopes to improve various properties of concrete. Nano silica as one of these materials has been introduced as a cement replacement material for concrete mixture in construction applications. It can modify the properties of concrete, due to high pozzolanic reactions and also making a denser microstructure. On the other hand, it is well recognized that the use of mineral admixtures such as silica fume affects the mechanical properties and durability of cementitious materials. In addition, the superior performance of self-consolidating concrete (SCC) and self-consolidating mortars (SCM) over conventional concrete is generally related to their ingredients. This study investigates the effect of nano silica and silica fume on the compressive strength and chloride permeability of self-consolidating mortars. Tests include compressive strength, rapid chloride permeability test, water permeability, capillary water absorption, and surface electrical resistance, which carried out on twenty mortar mixtures containing zero to 6 percent of nano silica and silica fume. Results show that SCMs incorporating nano silica had higher compressive strength at various ages. In addition, results show that nano silica has enhanced the durability SCMs and reduced the chloride permeability.

키워드

참고문헌

  1. Antonovic, V., Pundiene, I., Stonys, R., Cesniene, J. and Keriene, J. (2010), "A review of the possible applications of nanotechnology in refractory concrete", J. Civil Eng. Manag., 16(4), 595-602. https://doi.org/10.3846/jcem.2010.66
  2. ASHTO-T277 (1989), Standard Method of Test for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration, American Association of State Highway and Transportation Officials, 444 N Capitol St. NW - Suite 249 - Washington, DC 20001.
  3. ASTM-C109 (2012), Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), ASTM International, West Conshohocken, PA, US.
  4. ASTM-C150 (2012), Standard Specification for Portland Cement, ASTM International, West Conshohocken, PA, US.
  5. ASTM-C192 (2002), Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, ASTM International, West Conshohocken, PA, US.
  6. ASTM-C1202 (2012), Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration, ASTM International, West Conshohocken, PA, US.
  7. ASTM-C1611 (2010), Standard Test Method for Slump Flow of Self-Consolidating Concrete, ASTM International, West Conshohocken, PA, US.
  8. Chen, J., Kou, S.C. and Poon, C.S. (2011), "Photocatalytic cement-based materials: Comparison of nitrogen oxides and toluene removal potentials and evaluation of self-cleaning performance", Build. Environ., 46(9), 1827-1833. https://doi.org/10.1016/j.buildenv.2011.03.004
  9. Collins, F., Lambert, J. and Duan, W.H. (2012), "The influences of admixtures on the dispersion, workability, and strength of carbon nanotube-OPC paste mixtures", Cement Concrete Compos., 34(2), 201-207. https://doi.org/10.1016/j.cemconcomp.2011.09.013
  10. EN-480-5, B. (1997), Tests methods, determination of capillary absorption, British Standards Institution
  11. EN-12390-8, B. (2000), Depth of penetration of water under pressure, British Standards Institution
  12. Folli, A., Pade, C., Hansen, T.B., De Marco, T. and MacPhee, D.E. (2012), "TiO 2 photocatalysis in cementitious systems: Insights into self-cleaning and depollution chemistry", Cement Concrete Res., 42(3), 539-548. https://doi.org/10.1016/j.cemconres.2011.12.001
  13. Heidari, A. and Tavakoli, D. (2013), "A study of the mechanical properties of ground ceramic powder concrete incorporating nano-SiO2 particles", Construct. Build. Mater., 38, 255-264. https://doi.org/10.1016/j.conbuildmat.2012.07.110
  14. Hosseini, A.A., Hosseini, S.H. and Abbas Zadeh, A.R. (2012), "Study of compress strength and time setting of concrete by additives of silica fume and nano silica", Asian J. Chem., 24(2), 903-907.
  15. Jalal, M. (2013), "Influence of class F fly ash and silica nano-micro powder on water permeability and thermal properties of high performance cementitious composites", Sci. Eng. Compos. Mater., 20(1), 41-46.
  16. Jalal, M., Mansouri, E., Sharifipour, M. and Pouladkhan, A.R. (2012), "Mechanical, rheological, durability and microstructural properties of high performance self-compacting concrete containing SiO 2 micro and nanoparticles", Mater. Des., 34, 389-400. https://doi.org/10.1016/j.matdes.2011.08.037
  17. Jayapalan, A.R., Lee, B.Y. and Kurtis, K.E. (2013), "Can nanotechnology be 'green'? Comparing efficacy of nano and microparticles in cementitious materials", Cement Concrete Compos., 36, 16-24. https://doi.org/10.1016/j.cemconcomp.2012.11.002
  18. Khanzadi, M., Tadayon, M., Sepehri, H. and Sepehri, M. (2010), "Influence of nano-silica particles on mechanical properties and permeability of concrete", Ancona.
  19. Li, H., Xiao, H.G., Yuan, J. and Ou, J. (2004), "Microstructure of cement mortar with nano-particles", Compos.s Part B: Eng., 35(2), 185-189. https://doi.org/10.1016/S1359-8368(03)00052-0
  20. Ltifi, M., Guefrech, A., Mounanga, P. and Khelidj, A. (2011), "Experimental study of the effect of addition of nano-silica on the behaviour of cement mortars", Como.
  21. Lydon, F. (1995), "Effect of coarse aggregate and watercement ratio on intrinsic permeability of concrete subject to drying", Cement Concrete Res., 25(8), 1737-1746. https://doi.org/10.1016/0008-8846(95)00169-7
  22. Maghsoudi, A.A. and Dahooei, F.A. (2009), "Application of nanotechnology in self-compacting concrete design", Int. J. Eng., Transact. B: Appl., 22(3), 229-244.
  23. Melo, V.S., Calixto, J.M.F., Ladeira, L.O. and Silva, A.R. (2011), "Macro- and micro-characterization of mortars produced with carbon nanotubes", ACI Mater. J., 108(3), 327-332.
  24. Metaxa, Z.S., Seo, J.-W.T., Konsta-Gdoutos, M.S., Hersam, M.C. and Shah, S.P. (2012), "Highly concentrated carbon nanotube admixture for nano-fiber reinforced cementitious materials", Cement Concrete Compos., 34(5), 612-617. https://doi.org/10.1016/j.cemconcomp.2012.01.006
  25. Morsy, M.S., Alsayed, S.H. and Aqel, M. (2011), "Hybrid effect of carbon nanotube and nano-clay on physico-mechanical properties of cement mortar", Construct. Build. Mater., 25(1), 145-149. https://doi.org/10.1016/j.conbuildmat.2010.06.046
  26. Naji Givi, A., Abdul Rashid, S., Aziz, F.N.A. and Salleh, M.A.M. (2011), "The effects of lime solution on the properties of SiO2 nanoparticles binary blended concrete", Compos. Part B: Eng., 42(3), 562-569. https://doi.org/10.1016/j.compositesb.2010.10.002
  27. Nazari, A. and Riahi, S. (2011), "The effects of SiO2 nanoparticles on physical and mechanical properties of high strength compacting concrete", Compos. Part B: Eng.,42(3), 570-578. https://doi.org/10.1016/j.compositesb.2010.09.025
  28. Nazari, A. and Riahi, S. (2011), "The effects of TiO2 nanoparticles on properties of binary blended concrete", J. Compos. Mater., 45(11), 1181-1188. https://doi.org/10.1177/0021998310378910
  29. Nili, M., Ehsani, A. and Shabani, K. (2010), "Influence of nano-SiO 2 and microsilica on concrete performance", Ancona.
  30. Oltulu, M. and Sahin, R. (2011), "Single and combined effects of nano-SiO2, nano-Al2O3 and nano-Fe2O3 powders on compressive strength and capillary permeability of cement mortar containing silica fume", Materials science & engineering. A, Structural materials: properties, microstructure and processing, 528(22-23), 7012-7019. https://doi.org/10.1016/j.msea.2011.05.054
  31. Qing, Y., Zenan, Z., Deyu, K. and Rongshen, C. (2007), "Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume", Construct. Build. Mater., 21(3), 539-545. https://doi.org/10.1016/j.conbuildmat.2005.09.001
  32. Quercia, G., Spiesz, P., Husken, G. and Brouwers, H. (2014), "SCC modification by use of amorphous nano-silica", Cement Concrete Compos., 45, 69-81. https://doi.org/10.1016/j.cemconcomp.2013.09.001
  33. Raiess Ghasemi, A.M., Parhizkar, T. and Ramezanianpour, A.A. (2010), "Influence of colloidal nano-SiO 2 addition as silica fume replacement material in properties of concrete", Proceeding of the second international conference on sustainable construction materials and technologies. Ancona, Italy, Ancona.
  34. Ramachandran, D., Vishwakarma, V. and Samal, S.S. (2011), "Nanophase modification of concrete for enhancement of microbial properties and durability: Present status and future scope", Chennai.
  35. Ramezanianpour, A.A., Ghiasvand, E., Nickseresht, I., Mahdikhani, M. and Moodi, F. (2009), "Influence of various amounts of limestone powder on performance of Portland limestone cement concretes", Cement Concrete Compos., 31(10), 715-720. https://doi.org/10.1016/j.cemconcomp.2009.08.003
  36. Ramezanianpour, A.A., Pilvar, A., Mahdikhani, M. and Moodi, F. (2011), "Practical evaluation of relationship between concrete resistivity, water penetration, rapid chloride penetration and compressive strength", Contstruct. Build. Mater., 25(5), 2472-2479. https://doi.org/10.1016/j.conbuildmat.2010.11.069
  37. Ramezanianpour, A.A., Samadian, M. and Mahdikhani, M. (2012), "Engineering properties and durability of selfconsolidating concretes (SCC) containing volcanic pumice ASH", Asian J. Civil Eng., 13(4), 521-530.
  38. Ramzanianpour, A., Mahdikhani, M. and Ahmadibeni, G. (2009), "The effect of rice husk ash on mechanical properties and durability of sustainable concretes", Int. J. Civil Eng., 7(2), 83-91.
  39. Roy, D.M. (1996), "High-performance concrete: superior microstructure for long-term durability", ACI Spec. Public., 159.
  40. Sadrmomtazi, A., Fasihi, A., Balalaei, F. and Haghi, A. (2009), "Investigation of mechanical and physical properties of mortars containing silica fume and nano-$sio_2$", Konferencja Nauk. Tech., 3rd International Conference on Concrete & Development.
  41. Said, A., Zeidan, M., Bassuoni, M. and Tian, Y. (2012), "Properties of concrete incorporating nano-silica", Construct. Build. Mater., 36, 838-844. https://doi.org/10.1016/j.conbuildmat.2012.06.044
  42. Sanchez, F. and Sobolev, K. (2010), "Nanotechnology in concrete - A review", Construct. Build. Mater., 24(11), 2060-2071. https://doi.org/10.1016/j.conbuildmat.2010.03.014
  43. Shah, S.P. (2010), "Controlling properties of concrete through nanotechnology", Stellenbosch.
  44. Singh, L.P., Bhattacharyya, S.K. and Ahalawat, S. (2012), "Preparation of size controlled silica nano particles and its functional role in cementitious system", J. Adv. Concrete Tech., 10(11), 345-352. https://doi.org/10.3151/jact.10.345
  45. Yang, Z., Liu, J. and Liu, J. (2010), "Application of nano-silica modified fiber in cementitious materials", Dongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Southeast University (Natural Science Edition), 40(SUPPL. 2), 49-55.
  46. Zhang, M.H. and Islam, J. (2012), "Use of nano-silica to reduce setting time and increase early strength of concretes with high volumes of fly ash or slag", Construct. Build. Mater., 29, 573-580. https://doi.org/10.1016/j.conbuildmat.2011.11.013
  47. Zhang, M.H., Islam, J. and Peethamparan, S. (2012), "Use of nano-silica to increase early strength and reduce setting time of concretes with high volumes of slag", Cement Concrete Compos., 34(5), 650-662. https://doi.org/10.1016/j.cemconcomp.2012.02.005

피인용 문헌

  1. Assessment of strength and durability of bagasse ash and Silica fume concrete vol.17, pp.6, 2016, https://doi.org/10.12989/cac.2016.17.6.801
  2. Self compacting reinforced concrete beams strengthened with natural fiber under cyclic loading vol.17, pp.5, 2016, https://doi.org/10.12989/cac.2016.17.5.597
  3. Evaluating the settlement of lightweight coarse aggregate in self-compacting lightweight concrete vol.19, pp.2, 2014, https://doi.org/10.12989/cac.2017.19.2.203
  4. Plastic viscosity based mix design of self-compacting concrete with crushed rock fines vol.20, pp.4, 2017, https://doi.org/10.12989/cac.2017.20.4.461
  5. Modeling the effect of silica fume on the compressive, tensile strengths and durability of NSC and HSC in various strength ranges vol.4, pp.1, 2014, https://doi.org/10.1007/s41024-019-0058-4
  6. Influence of plastic viscosity of mix on Self-Compacting Concrete with river and crushed sand vol.23, pp.1, 2019, https://doi.org/10.12989/cac.2019.23.1.037
  7. Monitoring the Environmental Aging of Nanomaterials: An Opportunity for Mesocosm Testing? vol.12, pp.15, 2014, https://doi.org/10.3390/ma12152447
  8. RETRACTED: Utilization of industrial waste residue containing heavy metals as a substitute for fine aggregates vol.221, pp.None, 2014, https://doi.org/10.1016/j.conbuildmat.2019.06.061
  9. Enhancing the Fresh and Hardened Properties of the Early Age Concrete Modified with Powder Polymers and Characterized Using Different Models vol.9, pp.1, 2014, https://doi.org/10.1520/acem20190087
  10. Bonding of nano-modified concrete with steel under freezing temperatures using different protection methods vol.26, pp.3, 2014, https://doi.org/10.12989/cac.2020.26.3.257
  11. Quantification the effect of microsand on the compressive, tensile, flexural strengths, and modulus of elasticity of normal strength concrete vol.16, pp.6, 2021, https://doi.org/10.1080/17486025.2019.1680884
  12. Synergic effect of nano-silica and natural pozzolans on transport and mechanical properties of blended cement mortars vol.44, pp.None, 2014, https://doi.org/10.1016/j.jobe.2021.102667