동력기계공학회지 (Journal of Power System Engineering)

  • 제18권4호
  • /
  • Pages.78-84
  • /
  • 2014
  • /
  • 2713-8429(pISSN)
  • /
  • 2713-8437(eISSN)
한국동력기계공학회 (The Korean Society for Power System Engineering)
권호 표지
DOI QR코드

DOI QR Code

DIC에 의한 복합재료 변형측정

An Estimation of Deformation for Composites by DIC

  • 권오헌 (부경대학교 안전공학과) ;
  • 강지웅 (대구한의대학교 보건학부)
  • Kwon, Oh-Heon (Department of Safety Engineering, Pukyong National University) ;
  • Kang, Ji-Woong (Faculty of Health Science, Daegu Haany University)
  • 투고 : 2014.02.14
  • 심사 : 2014.06.09
  • 발행 : 2014.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The estimation of deformation and strain for the twill-weave carbon fiber reinforced plastic composite(CFRP) during the test with a digital image correlation system were implemented experimentally. The carbon fiber reinforced plastic composites have been developed as the edge technology materials. The plain, twill and satin weave types are commonly used for the CFRP composites. Thus, it is essential to find the deformation characteristics for those types of CFRP more easily. Especially the DIC method can express the visual strain distributions at the full range of the interested areas in the structures. In this study, the mechanical properties of twill-weave CFRP composite and the variation of strains in a full field of the specimen were estimated. The experiments were performed under a tensile loading and 3-point bending test with strain gages. Futhermore the DIC deformation results were estimated for the comparison. The results showed the deformation and strain contours visually well in all region of the interested areas and so usefulness for the safety control of the structures.

키워드

참고문헌

  1. B. M. Glover, 2004, "History of development of commercial aircraft and 727 dreamliner", Aviation Engineering, Vol. 592, pp. 16-21.
  2. M. Arai, Y. Noro, K. sugimoto and M. Endo, 2008, "Mode I and mode II interlaminar fracture toughness of CFRP laminates toughness by carbon nanofiber interlayer", Composites Sciences and Technology, Vol. 68, pp. 516-525. https://doi.org/10.1016/j.compscitech.2007.06.007
  3. G. Anzelotti, G. Nicoletto and E. Riva, 2008, "Mesomechanic strain analysis of twill-weave composite lamina under unidirectional in-plane tension", Composite Part A, Vol. 39, pp. 1294-1301. https://doi.org/10.1016/j.compositesa.2008.01.006
  4. Y. S. Lee, 1992, "Study on heat transfer characteristics of R-22", MS thesis, Hankuk University, Seoul.
  5. ASTM D3039, 2000, "Standard Test Method for Tensile Properites of Polymer Matrix Composite Materials", Annual Book of ASTM Standards.
  6. ASTM D7264, 2007, "Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials", Annual Book of ASTM Standards.
  7. M. A. Sutton, W. J. Wolters, W. H. Peters, W. F. Ranson and S. R. McNeil, 1983, "Determination of displacement using an improved digital correlation method", Image Vision Computation, Vol. 1, No. 3, pp. 133-139. https://doi.org/10.1016/0262-8856(83)90064-1
  8. D. Amodio, G. B. Broggiato, F. Campana and G. M. Newaz, 2003, "Digital speckle correlation for strain measurement by image analysis", Vol. 43, No. 4, pp. 396-402. https://doi.org/10.1007/BF02411344

피인용 문헌

  1. k-NN 분류 모델의 학습 데이터 구성에 따른 PIC 보의 하중 충실도 향상에 관한 연구 vol.33, pp.3, 2020, https://doi.org/10.7234/composres.2020.33.3.108