대한건축학회논문집:구조계 (Journal of the Architectural Institute of Korea Structure & Construction)

  • 제30권4호
  • /
  • Pages.51-58
  • /
  • 2014
  • /
  • 1226-9107(pISSN)
  • /
  • 2384-1788(eISSN)
대한건축학회 (Architectural Institute of Korea)
권호 표지
DOI QR코드

DOI QR Code

비정질 금속섬유 혼입율에 따른 모르타르의 유동성 및 경화특성

The Fluidity and Hardened Properties of Fiber Reinforced Mortar by Amorphous Metallic Fiber Ratios

  • 이봉춘 (한국건설생활환경시험연구원) ;
  • 최세진 ((재)포항산업과학연구원)
  • 투고 : 2013.11.18
  • 심사 : 2014.03.17
  • 발행 : 2014.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Generally, steel fiber is broadly used to improve the mechanical and flexural strength properties of concrete, however, the steel fiber have some disadvantages including high density, fiber ball and corrosion etc. Recently, a new type of amorphous metallic fiber was developed to improve some properties of normal steel fiber such as non-corrosion and flexible properties of fiber itself. In this paper, we used the amorphous metallic fiber with 30mm of length at additional ratios of 0%, 0.5%, 1.0%, 1.5%, 2.0%, 3.0% and 4.0% to estimate the properties of the mortar with amorphous metallic fiber. And the effects of contents of amorphous metallic fiber on the flow, compressive strength, flexural strength, drying shrinkage, crack reducing property and thermal conduction property of mortar were investigated. Test results indicated that using amorphous metallic fiber in mortar resulted in improvement in the flexural properties of mortar. The flexural strength of mortar with contents of Rf 4.0% amorphous metallic fiber was about 29% higher than that of the plain mortar. The drain shrinkage using amorphous metallic fiber was improved as compared to the mortar without the amorphous metallic fiber. In addition, the thermal conduction property was similar in all mortar mixtures regardless of contents of amorphous metallic fiber.

키워드

과제정보

연구 과제 주관 기관 : 국토교통부

참고문헌

  1. 박은수, Harvard University, 재료 연구의 첨단에 있는 벌크 비정질 재료, 2008
  2. Havard University,KOSEN Conference Report, The 5th Inte rnational Conference on Bulk Metallic Glasses.
  3. 윤길봉, 팽창재 및 동섬유 보강 바닥마감용 시멘트 모르터의 건조수축 및 열전도 특성, 대한건축학회논문집-구조계, 18.8 (2002): 67-74.
  4. 김석환, 서정기, 김수민, "고효율 바닥복사난방시스템을 위한 그라파이트 함유 고열전도 모르타르." 대한건축학회 학술발표 대회논문집 32.2 (2012): 273-274.
  5. Barbara Kucharczykovaa, Ondrej Pospichal, Petr Misak, Petr Danek, Tomas Vymazal, Shrinkage of LWAC-Effect of a ggregate absorption, Modern Building Materials, Structures and Techniques, The 10th International Conference, p.p.167- 172, May, 2010
  6. 서영섭 최신기계재료, 기전연구사, p.359, 360, 361.
  7. 나종현, 김도향, "고강도 벌크 비정질 합금", 한국소성가공학회지 제 14권 제 2호, p.p.97-104, 2005.
  8. 금동화,재미있는 나노과학기술 여행 양문출판사, p.36.
  9. 김양수, 재료공학, 기전연구사, p.35.
  10. 비정질 재료 PILOT 건설 및 저손실 변압기 제작기술, 연구 기관 재단법인 한국전기연구소
  11. 은상원, 장용수, 황경주, 배대성, 소재분석 및 증착 실무, 도서출판 상학당, p.323.
  12. 최세진, 강현진, 전용수, 김갑득, 비정질섬유를 혼합한 콘크리트의 유동성 및 압축강도 특성, 한국콘크리트학회 봄학술대회 논문집, 25(1), p.p.359-360, 2013
  13. A.L. Greer, E. Ma et al., Bulk Metallic Glasses: At the Cu tting Edge of Metals Research, MRS BULLETIN, August 2007.
  14. P.J. Blau, Friction and wear of a Zr-based amorphous met al alloy under dry and lubicated conditions, Wear, 250, p.431, 2001. https://doi.org/10.1016/S0043-1648(01)00627-5
  15. Applied Sciences Laboratory, Washington State University http://www.asl.wsu.edu/site/research/am_bulkMetallicGlasse s.html.
  16. D. J. Branagan, W. D. Swank, D. C. Haggard, J. R. Fincke, Metal Mater. Trans. A, 32, P.2615, 2001. https://doi.org/10.1007/s11661-001-0051-8
  17. Christopher A. Schuh, Todd C. Hufnagel and Upadrasta Ramamurty, Mechanical behavior of amorphous alloys, Acta Materialia, 2007.
  18. T. Zhang and A. Inone, Mater. Trans. Japan Inst. Metals, 39, p.857, 1998.