DOI QR코드

DOI QR Code

Experimental Study on Punching Shear Strength and Failure Behaviour of Donut type Biaxial Hollow slab

도넛형 이방향 중공슬래브 뚫림전단 강도 및 파괴거동에 대한 실험적 연구

  • 정주홍 (한양대학교 대학원 건축환경공학과) ;
  • 윤주리 (한양대학교 대학원 건축환경공학과) ;
  • 이승창 (삼성건설 기반기술연구소) ;
  • 최창식 (한양대학교 건축공학과)
  • Received : 2013.09.02
  • Accepted : 2014.04.01
  • Published : 2014.04.25

Abstract

This paper presents the punching shear strength and failure behavior of biaxial hollow slab with donut type hollow-shaper. Until now, various types of slab systems which can reduce self-weight of slabs have been studied as the height and width of building structures rapidly increase. A biaxial hollow slab system is widely known as one of the effective slab system which can reduce self-weight of slab. According to previous studies, the biaxial hollow slab has weakness in slab-column connection compared with solid slab. And previous studies pointed out reduced cross-section area of concrete by hollows as the cause. It is assumed in this study that the shape of hollows and the location of hollow-shaper exert influence on the punching shear strength of biaxial hollow slabs. Therefore, donut type hollow-shaper which was suggested as the optimal hollow shape in previous study was used in this study. To verify the punching shear strength and failure behaviour of donut type biaxial hollow slab, punching shear tests were conducted. 4 test specimens were used for test parameters. One was conventional RC slab and 3 were hollow slabs. The test parameter was the area of critical section which were determined by the number of hollow-shaper around the column. The punching shear strength of the donut type biaxial hollow slabs are 87%~103% of solid slabs and superior to generic biaxial hollow slabs. And punching shear cracks occurred at the first perimeter line of donut type hollows.

Keywords

References

  1. 이승창, 최창식, 오정근, 황대진, 김긍환, "지진 하중 저감기술 을 활용한 내진성능향상 공법:GB-SLAB"
  2. BubbleDeck Technology, "BubbleDeck Voided Flat Slab Sol utions - Technical Manual & Documents", BubbleDeck U K, 2008.
  3. 정주홍, 이승창, 최창식, 최현기, "중공형상 및 재료의 영향을 고려한 도넛형 이방향 중공슬래브의 일방향 전단강도", Journ al of the Korea Concrete Institute, Vol. 24, No. 4, p.p.391-398, 2012. https://doi.org/10.4334/JKCI.2012.24.4.391
  4. 김상모, 장태영, 김상섭, "이방향 중공슬래브의 구조성능평가", 대한건축학회논문집, Vol. 25, No. 8, 2009, p.p. 35-42.
  5. 이우석, 조승호, 이상현, 조상규, 정란, "타원구를 사용한 중공 슬래브의 휨 강도와 휨 강성", 대한건축학회논문집, Vol.25, No. 1, p.p. 49-56, 2009.
  6. Martina Schnellenbach-Held, Karsten Pfeffer, Punching behavior of biaxial hollow slabs, Cement & Concrete Composites, Vol. 24, p.p.551-556, 2002. https://doi.org/10.1016/S0958-9465(01)00071-3
  7. 이영은, 류재호, 주영규, 김상대, 김재건, TVS경량체가 적용된 이방향 중공슬래브-기둥 접합부 뚫림전단거동의 실험적 평가, 대한건축학회논문집, Vol. 27, No. 11, p.p.71-78, 2011.
  8. 박진아, 중공부를 갖는 전이바닥판 시스템의 뚫림전단강도, 석사학위논문, 한양대학교 대학원 건축환경공학과, 2010.
  9. 정주홍, 최현기, 이승창, 최창식, 이방향 중공슬래브의 최적 중공형성체 형상 도출을 위한 해석적 연구, 대한건축학회논문집, Vol. 27, No. 7, p.p.3-10, 2011.
  10. A.Ahmed, M.M. Fayyadh, S.Naganathan and K. Nasharuddin, "Reinforced concrete beams with web openings: A state of th e art review", Materials and Design, Vol.40, p.p. 90-102, 2012. https://doi.org/10.1016/j.matdes.2012.03.001
  11. Park,R., "Evaluation of Ductility of Structures and Structur al Assemblages from Laboratory Testing", Bulletin of the New Zealand National Society for Earthquake Engineering, Vol. 22, No. 3, p.p.155-166, 1989.
  12. 한국콘크리트학회, 콘크리트구조설계기준, 2007.
  13. 한국콘크리트학회, 콘크리트구조설계기준, 2012.