Journal of the Architectural Institute of Korea Planning & Design (대한건축학회논문집:계획계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Thermal-bridge-free Construction Details of the Thermal Envelope for a Passive House using Heat Transfer Simulation

전열해석 시뮬레이션을 통한 패시브주택의 단열외피 열교 최소화 상세 개발 연구

  • Received : 2014.01.24
  • Accepted : 2014.05.12
  • Published : 2014.05.30
⟨ Previous Next ⟩

Abstract

Current Korean building energy policy and standards provide only the specific insulating performance standards of the building component and it overlooks the prevention of heat loss caused by thermal bridge when evaluating building performance. In this research, details to minimize the heat loss due to thermal bridge was developed to achieve the linear thermal transmittance criterion(Psi<0.01W/mK) of the German Passivhaus Institut(PHI), performed through two-dimensional heat transfer simulation in a steady-state-condition (ISO 10211:2007). Then, the heat loss from the developed passive house details was compared with the exampled details as per the current Korean building code, and their effect on the annual heating energy demand was weighed according to the calculation method in PHPP(the building energy performance evaluation program of the PHI). Lastly, the possibility of condensation and mould was evaluated by using the temperature factor (ISO 10211:2007). As the result, while the overall heat loss through thermal bridges in enhanced passive house details was minimized to $1.1kWh/m^2a$, the gross heat loss due to thermal bridge in exampled details was $35.3kWh/m^2a$, which exceeds alone the annual heating energy demand criterion ($15kWh/m^2a$) for passive house set by PHI. This shows that enhancing the building energy performance to the high-energy-efficient standard will be hindered, if minimizing thermal bridge is left neglected. Therefore, it is necessary to set up specific criteria to minimize the heat loss due to thermal bridge, in order to achieve the Korean building energy-efficiency road map set by the government. In addition, the study for diverse measure to manage the thermal bridge details in design and construction process is needed.

Keywords

Acknowledgement

Grant : 한국형패시브하우스 인증모형 개발 및 쾌적지수에 따른 경제성 평가연구

Supported by : 국토교통과학기술진흥원

References

  1. 국토해양부, 건축물의 에너지절약설계기준, 국토해양부 고시 제 2013-149호, 2013
  2. 송승영 외, 열교부위의 손실열량이 공동주택 동단위 난방부하에 미치는 영향분석, 대한건축학회 학술대회 논문집 계획계 제 26권 제 1호, 2009
  3. 송승영 외, ISO 13790의 Monthly Calculation Method를 이용한 내단열 대비 외단열 공동주택의 열교제거와 열용량 증가에 의한 난방 및 냉방 에너지 절약 효과분석, 대한건축학회 논문집, 제 26권 제7호, 2010
  4. DIN 4108-2 Warmeschutz und Energie-Einsparung in Gebauden - Teil 2: Mindestanforderungen an den Warmeschutz, 2003
  5. DIN 4108-4 Warmeschutz und Energie-Einsparung in Gebauden - Teil 4: Warme- und feuchteschutztechnische Bemessungswerte, 2007
  6. DIN 4108-6 Warmeschutz und Energie-Einsparung in Gebauden - Teil 6: Berechnung des Jahresheizwarme- und des Jahresheizenergiebedarfs, 2003
  7. Feist, W.(Ed.), Warmebruckenfreies Konstruieren, Protokollband Nr. 16 des Arbeitskreises kostengunstige Passivhauser Phase II, 9th ed., Passivhaus Institut, Darmstadt, Germany, 2010
  8. Feist, W.(Ed.), Energiebilanzen mit dem Passivhaus Projektierungs Paket. Protokollband Nr. 13 des Arbeitskreises kostengunstige Passivhauser Phase II, 3rd ed.., Passivhaus Institut, Darmstadt, Germany, 2009
  9. Feist, W., Passive House Planning Package Version 7 (2012), Passivhaus Institut, Darmstadt, Germany, 2012
  10. ISO 6946 Building components and building elements - Thermal resistance and thermal transmittance - Calculation method, 2007
  11. ISO 10077-2 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames, 2012
  12. ISO 10211 Thermal bridges in building construction - Heat flows and surface temperature -Detailed calculation, 2007
  13. ISO 10456 Building materials and products - Hygrothermal properties - Tabulated design values and procedures for determining declared and design thermal values, 2007
  14. ISO 13370 Thermal performance of buildings - Heat transfer via the ground - Calculation methods, 2007
  15. ISO 13788 Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods, 2001
  16. ISO 13790 Energy performance of buildings - Calculation of energy use for space heating and cooling, 2008.
  17. ISO 14683 Thermal bridges in building construction- Linear thermal transmittance - simplified mothods and default values, 2007
  18. Nyberg, H., Thermal bridges at foundations-evaluation of heat calculation methods, Chalmers university of technology, Goeteborg, Sweden, 2011
  19. ONORM B8110-2 Warmeschutz im Hochbau, Teil 2 Wasserdampfdiffusion und Kondensationsschutz, 2003
  20. ONORM B8110-6 Wameschutz im Hochbau Teil 6: Grundlagen und Nachweisverfahren - Heizwamebedarf und Kuhlbedarf, 2007
  21. SIA 180; SN 520180 Warme- und Feuchteschutz im Hochbau, 2000
  22. SIA 380/1; SN 520380/1 Thermische Energie im Hochbau, 2009
  23. SIA D0170 Thermische Energie im Hochbau, 2001
  24. Starzner, Sepp et al.: Ecobis - Okologisches Baustoffinformationssystem, Bundesministerium fur Verkehr, Bau- und Wohnungswesen, CD ROM, 2000

Cited by

  1. Extraction and Analysis of Technical Management Factors for Passive Houses in Korea vol.16, pp.1, 2017, https://doi.org/10.3130/jaabe.16.75