DOI QR코드

DOI QR Code

Study on Hardness and Corrosion Resistance of Magnesium by Anodizing and Sealing Treatment With Nano-diamond Powder

양극산화와 나노 다이아몬드 분말 봉공처리에 의한 마그네슘의 경도와 부식에 관한 연구

  • Kang, Soo Young (Dept. of Metallurgical & Material Engineering, Inha Technical College) ;
  • Lee, Dae Won (School of materials science and engineering, Inha University)
  • 강수영 (인하공업전문대학 금속재료과) ;
  • 이대원 (인하대학교 신소재공학부)
  • Received : 2014.05.07
  • Accepted : 2014.07.09
  • Published : 2014.08.28

Abstract

In this study, in order to increase surface ability of hardness and corrosion of magnesium alloy, anodizing and sealing with nano-diamond powder was conducted. A porous oxide layer on the magnesium alloy was successfully made at $85^{\circ}C$ through anodizing. It was found to be significantly more difficult to make a porous oxide layer in the magnesium alloy compared to an aluminum alloy. The oxide layer made below $73^{\circ}C$ by anodizing had no porous layer. The electrolyte used in this study is DOW 17 solution. The surface morphology of the magnesium oxide layer was investigated by a scanning electron microscope. The pores made by anodizing were sealed by water and aqueous nano-diamond powder respectively. The hardness and corrosion resistance of the magnesium alloy was increased by the anodizing and sealing treatment with nano-diamond powder.

Keywords

References

  1. S. Y. Kang and D. W. Lee: J. Kor. Powd. Metall. Inst., 21 (2014) 114. https://doi.org/10.4150/KPMI.2014.21.2.114
  2. J. E. Gray and B. Luan: J. Alloys and Compounds, 336 (2002) 66.
  3. M. Bolet, S. Verdler, S, Maximovitch and F. Dalard: Surface and Coatings Technology, 199 (2005) 141. https://doi.org/10.1016/j.surfcoat.2004.10.145
  4. R. Arrabal, E. Matyktna, F. Viejo, P. Skeldon and G.E. Thompeon: Corrosion Science, 50 (2008) 1744. https://doi.org/10.1016/j.corsci.2008.03.002
  5. A. Ghasemi, V. S. Raja, C. Blawert, W. Dkietxel and K. U. Kainer: Surface and Coatings Technology, 202 (2008) 3513. https://doi.org/10.1016/j.surfcoat.2007.12.033
  6. Y. L. Song, Y. H. Liu, S. R. Yu, X. Y. Zhu and Q. Wang: Applied Surface Science, 254 (2008) 3014. https://doi.org/10.1016/j.apsusc.2007.10.043
  7. P. B. Srinivasan, C. Blawert and W. Dietzel: Material Science and Engineering, 401 (2008) 494.
  8. Y. Zhang, C. Yan, F. Wang, H. Lou and C. Cao: Surface and Coatings Technology, 36 (2002) 161.
  9. H. Duan, K. Du, C. Yan and F. Wang: Electrochemica Acta, 51 (2006) 2898. https://doi.org/10.1016/j.electacta.2005.08.026
  10. S. M. Moon and S. I. Pyun: J. Corr. Sci. Soc. of Korea, 26 (1997) 498.
  11. F. Keller, M. S. Hunter and D. L. Robinson: J. Electrochem. Soc., 100 (1953) 411. https://doi.org/10.1149/1.2781142
  12. Z. Ashitaka, G. E. Thompson, P. Skeldon, G. C. Wood and K. Shimizu: J. Electrochem. Soc., 146 (1999) 1380. https://doi.org/10.1149/1.1391774
  13. I. Serbrennikova, P. Vanysek and V. I. Birss: Electrochimica Acta, 42 (1997) 146.
  14. J. P. Hoar: J. Phys. Chem. Solid, 9 (1959) 97. https://doi.org/10.1016/0022-3697(59)90199-4