DOI QR코드

DOI QR Code

Structural impact response characteristics of an explosion-resistant profiled blast walls in arctic conditions

  • Sohn, Jung Min (The Korea Ship and Offshore Research Institute (The Lloyd's Register Foundation Research Centre of Excellence), Pusan National University) ;
  • Kim, Sang Jin (The Korea Ship and Offshore Research Institute (The Lloyd's Register Foundation Research Centre of Excellence), Pusan National University) ;
  • Seong, Dong Jin (The Korea Ship and Offshore Research Institute (The Lloyd's Register Foundation Research Centre of Excellence), Pusan National University) ;
  • Kim, Bong Ju (The Korea Ship and Offshore Research Institute (The Lloyd's Register Foundation Research Centre of Excellence), Pusan National University) ;
  • Ha, Yeon Chul (The Korea Ship and Offshore Research Institute (The Lloyd's Register Foundation Research Centre of Excellence), Pusan National University) ;
  • Seo, Jung Kwan (The Korea Ship and Offshore Research Institute (The Lloyd's Register Foundation Research Centre of Excellence), Pusan National University) ;
  • Paik, Jeom Kee (The Korea Ship and Offshore Research Institute (The Lloyd's Register Foundation Research Centre of Excellence), Pusan National University)
  • 투고 : 2012.05.21
  • 심사 : 2014.06.19
  • 발행 : 2014.09.10

초록

Environmental changes, especially global climate change, are creating new challenges to the development of the Arctic regions, which have substantial energy resources. And attention to offshore structures has increased with oil and gas development. The structural impact response of an explosion-resistant profiled blast walls normally changes when it operates in low temperatures. The main objectives of this study are to investigate the structural response of blast walls in low temperature and suggest useful guidelines for understanding the characteristics of the structural impact response of blast walls subjected to hydrocarbon explosions in Arctic conditions. The target temperatures were based on the average summer temperature ($-20^{\circ}C$), the average winter temperature ($-40^{\circ}C$) and the coldest temperature recorded (approximately $-68^{\circ}C$) in the Arctic. The nonlinear finite element analysis was performed to design an explosion-resistant profiled blast wall for use in Arctic conditions based on the behaviour of material properties at low temperatures established by performing a tensile test. The conclusions and implications of the findings are discussed.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea (NRF)

참고문헌

  1. Abrahamson, G.R. and Lindberg, H.E. (1976), "Peak load-impulse characterization of critical pulse loads in structural dynamic", Nucl. Eng. Des., 37, 35-46. https://doi.org/10.1016/0029-5493(76)90051-0
  2. ANSYS/LS-DYNA (2013), User's manual (version 14.0), ANSYS Inc., Canonsburg, PA, USA.
  3. ASTM (2008), ASTM A131/A131M-08: Standard specification for structural steel for ships, American Society for Testing and Materials International, Conshohocken, PA, USA.
  4. ASTM (2009), STM E8/E8M-09: Standard test methods for tension testing of metallic materials, American Society for Testing and Materials International, Conshohocken, PA, USA.
  5. Cowper, G. and Symonds, P.S. (1957), Strain-hardening and strain-rate effects in the impact loading of cantilever beams, Technical Report 28, Department of Applied Mathematics, Brown University, RI, USA.
  6. Czujko, J. (2001), Design of offshore facilities to resist gas explosion hazard: Engineering handbook, CorrOcean ASA, Oslo, Norway.
  7. Enerdata (2013), Global energy statistical yearbook, Enerdata, London, UK.
  8. FABIG (1999), Technical note 5: Design guide for stainless steel blast walls, Fire and Blast Information Group, Berkshire, UK.
  9. HSE (2003), Pulse pressure testing of 1/4 scale blast walls panels with connections, Health and Safety Executive Research Report, RR124, Health and Safety Executive, London, UK.
  10. HSE (2006), Pulse pressure testing 1/4 scale blast wall panels with connections - phase II, Health Safety Executive Research Report, RR404, Health and Safety Executive, London, UK.
  11. ISO (2000), ISO 15579 - Metallic materials: Tensile testing at low temperature, International Organization for Standardization, Geneva, Switzerland.
  12. Langdon, G.S. and Schleyer, G.K. (2005a), "Inelastic deformation and failure of profiled stainless steel blast wall panels. Part I: experimental investigations", Int. J. Impact Eng., 31(4), 370-399.
  13. Langdon, G.S. and Schleyer, G.K. (2005b), "Inelastic deformation and failure of profiled stainless steel blast wall panels. Part II: analytical modelling considerations", Int. J. Impact Eng., 31(4), 341-369. https://doi.org/10.1016/j.ijimpeng.2003.12.002
  14. Langdon, G.S. and Schleyer, G.K. (2006), "Inelastic deformation and failure of profiled stainless steel blast wall panels. Part III: finite element simulations and overall summary", Int. J. Impact Eng., 32(6), 988-1012. https://doi.org/10.1016/j.ijimpeng.2004.08.002
  15. Louca, L.A., Pan, Y.G. and Harding, J.E. (1998), "Response of stiffened and unstiffened plates subjected to blast loading", Eng. Struct., 20(12), 1079-1086. https://doi.org/10.1016/S0141-0296(97)00204-6
  16. LR (2012), Arctic opening: opportunity and risk in the high north, Lloyd's Register, London, UK
  17. NORSOK (1999), Design of steel structures, Norwegian Standards, Oslo, Norway.
  18. Paik, J.K. (2011), Explosion and fire engineering of FPSO (Phase III): Nonlinear structural consequence analysis, Report No. EFEF-04, The Ship and Offshore Research Institute, Pusan National University, Busan, Korea.
  19. Paik, J.K. and Chung, J.Y. (1999), "A basic study on static and dynamic crushing behavior of a stiffened tube", Tran. Korea Soc. Automobile Eng., 7(1), 219-238. (in Korean)
  20. Paik, J.K. and Czujko, J. (2010), Explosion and fire engineering of FPSOs (Phase II): Definition of fire and gas explosion design loads, Report No. EFEF-03, The Ship and Offshore Research Institute, Pusan National University, Busan, Korea.
  21. Park, D.K., Kim, D.K., Jang, B.S, Park, D.H., Kim, D.H., Kim, B.J., Seo, J.K. and Paik, J.K. (2011), "The Effects of low temperature on the material properties and plated structures", Annual Spring Meeting of The Society of Naval Architects of Korea, Busan, Korea, June. (in Korean)
  22. Schleyer, G.K., Kewaisy, T.H., Wesevich, J.W. and Langdon, G.S. (2006), "Validated finite element analysis model of blast wall panels under shock pressure loading", J. Ship Offshore Struct., 1(3), 257-271. https://doi.org/10.1533/saos.2006.0127
  23. Schleyer, G.K., Langdon, G.S., Martland, R., Lowak, M. and Polcyn, M. (2003), "Pulse pressure testing of 1/4 scaled steel blast panels", Proceedings of 12th Major Hazards offshore Conference, ERA Technology, London, UK, December.

피인용 문헌

  1. Pressure–Impulse (P–I) Diagrams for Reinforced Concrete (RC) Structures: A Review pp.1886-1784, 2018, https://doi.org/10.1007/s11831-018-9260-9
  2. Uncertainties in blast simulations evaluated with Smoothed Particle Hydrodynamics method vol.74, pp.6, 2014, https://doi.org/10.12989/sem.2020.74.6.771
  3. Numerical formulation of P-I diagrams for blast damage prediction and safety assessment of RC panels vol.75, pp.5, 2014, https://doi.org/10.12989/sem.2020.75.5.607
  4. Effect of shear zone on dynamic behaviour of rock tunnel constructed in highly weathered granite vol.23, pp.3, 2014, https://doi.org/10.12989/gae.2020.23.3.245
  5. Development of a generalized scaling law for underwater explosions using a numerical and experimental parametric study vol.77, pp.3, 2014, https://doi.org/10.12989/sem.2021.77.3.305
  6. Effect of rebar spacing on the behavior of concrete slabs under projectile impact vol.77, pp.3, 2014, https://doi.org/10.12989/sem.2021.77.3.329