DOI QR코드

DOI QR Code

Kinematic limit analysis of pullout capacity for plate anchors in sandy slopes

  • Yu, S.B. (Centre for Geotechnical and Materials Modelling, The University of Newcastle) ;
  • Merifield, R.S. (Centre for Geotechnical and Materials Modelling, The University of Newcastle) ;
  • Lyamin, A.V. (Centre for Geotechnical and Materials Modelling, The University of Newcastle) ;
  • Fu, X.D. (School of Civil Engineering, Wuhan University)
  • 투고 : 2013.08.13
  • 심사 : 2014.04.20
  • 발행 : 2014.08.25

초록

The pullout capacity of plate anchors has been studied extensively over the past 40 years. However, very few studies have attempted to calculate the pullout capacity of anchors in sandy slopes. In this paper, three upper bound approaches are used to study the effect of a sloping ground surface and friction angle on pullout capacity and failure of plate anchors. This includes the use of; simple upper bound mechanisms; the block set mechanism approach; and finite element upper bound limit analysis. The aim of this research is to better understand the various failure mechanisms and to develop a simple methodology for estimating the pullout capacity of anchors in sandy slopes.

키워드

참고문헌

  1. Chen, W.F. (1975), Limit analysis and soil plasticity, Elsevier Science & Technology.
  2. Choudhury, D. and Subba Rao, K.S. (2007), "Generalized solution for seismic uplift capacity of strip anchors using pseudo-static approach" J. Earthq. Tsunami, 1(4), 311-328. https://doi.org/10.1142/S1793431107000171
  3. Das, B.M. and Seeley, G.R. (1975), "Breakout Resistance of Shallow Horizontal Anchors" J. Geotech. Eng. Div., 101(9), 999-1003.
  4. Dickin, E.A. and Laman, M. (2007), "Uplift response of strip anchors in cohesionless soil" Adv. Eng. Softw., 38(8-9), 618-625. https://doi.org/10.1016/j.advengsoft.2006.08.041
  5. Khing, K.H., Das, B.M. and Yen, S.C. (1994), Uplift capacity of strip plate anchors in clay with sloping surface, International Society of Offshore and Polar Engineers, Osaka,Japan.
  6. Krabbenhoft, K., Lyamin, A.V., Hjiaj, M. and Sloan, S.W. (2005), "A new discontinuous upper bound limit analysis formulation" Int. J. Numer. Meth. Eng., 63(7), 1069-1088. https://doi.org/10.1002/nme.1314
  7. Kumar, J. (1997), "Upper bound solution for pullout capacity of anchors on sandy slopes" Int. J. Numer. Anal. Meth. Geomech., 21(7), 477-484. https://doi.org/10.1002/(SICI)1096-9853(199707)21:7<477::AID-NAG880>3.0.CO;2-I
  8. Lyamin, A.V. and Sloan, S.W. (2002a), "Lower bound limit analysis using non-linear programming" Int. J. Numer. Method. Eng., 55(5), 573-611. https://doi.org/10.1002/nme.511
  9. Lyamin, A.V. and Sloan, S.W. (2002b), "Upper bound limit analysis using linear finite elements and nonlinear programming" Int. J. Numer. Anal. Meth. Geomech., 26(2), 181-216. https://doi.org/10.1002/nag.198
  10. Merifield, R.S. (2002), Numerical modelling of soil anchors, University of Newcastle, Australia
  11. Merifield, R.S., Lyamin, A.V. and Sloan, S.W. (2005), "Stability of inclined strip anchors in purely cohesive soil" J. Geotech. Geoenviron. Eng., 131(6), 792-799. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:6(792)
  12. Merifield, R.S., Lyamin, A.V. and Sloan, S.W. (2006), "Three-dimensional lower-bound solutions for the stability of plate anchors in sand" Geotechnique, 56(2), 123-132. https://doi.org/10.1680/geot.2006.56.2.123
  13. Merifield, R.S. and Sloan, S.W. (2006), "The ultimate pullout capacity of anchors in frictional soils" Can. Geotech. J., 43(8), 852-868. https://doi.org/10.1139/t06-052
  14. Merifield, R.S., Sloan, S.W. and Yu, H.S. (2001), "Stability of plate anchors in undrained clay" Geotechnique, 51(2), 141-153. https://doi.org/10.1680/geot.2001.51.2.141
  15. Meyerhof, G.G. and Adams, J.I. (1968), "The ultimate uplift capacity of foundations" Can. Geotech. J., 5(4), 225-244. https://doi.org/10.1139/t68-024
  16. Murray, E.J. and Geddes, J.D. (1989), "Resistance of passive inclined anchors in cohesionless medium" Geotechnique, 39(3), 417-431.
  17. Rowe, R.K. and Davis, E.H. (1982), "The behaviour of anchor plates in sand" Geotechnique, 32(1), 25-41. https://doi.org/10.1680/geot.1982.32.1.25
  18. White, D.J., Cheuk, C.Y. and Bolton, M.D. (2008), "The uplift resistance of pipes and plate anchors buried in sand" Geotechnique, 58(10), 771-779. https://doi.org/10.1680/geot.2008.3692
  19. Yu, S.B. (2011), "Block set mechanism for upper bound analysis and its applications" Ph.D Thesis, Tongji University, Shanghai

피인용 문헌

  1. Undrained uplift capacity of deeply embedded strip anchors in non-uniform soil vol.70, 2015, https://doi.org/10.1016/j.compgeo.2015.07.014
  2. Undrained uplift resistance of strip plate anchors in clayey slopes vol.11, pp.5, 2017, https://doi.org/10.1080/19386362.2016.1238561
  3. Uplift capacity of horizontal strip plate anchors adjacent to slopes considering seismic loadings vol.56, pp.6, 2016, https://doi.org/10.1016/j.sandf.2016.11.005
  4. Lower bound solutions for uplift capacity of strip anchors adjacent to sloping ground in clay 2017, https://doi.org/10.1080/1064119X.2017.1322647
  5. Pullout capacity of strip plate anchor in cohesive sloping ground under undrained condition vol.78, 2016, https://doi.org/10.1016/j.compgeo.2016.05.006
  6. Investigation of the effect of surcharge on behavior of soil slopes vol.13, pp.4, 2017, https://doi.org/10.12989/gae.2017.13.4.653
  7. Uplift capacity of horizontal anchor plate embedded near to the cohesionless slope by limit analysis vol.13, pp.4, 2014, https://doi.org/10.12989/gae.2017.13.4.701
  8. Pullout capacity of shallow inclined anchor in anisotropic and nonhomogeneous undrained clay vol.13, pp.5, 2014, https://doi.org/10.12989/gae.2017.13.5.825
  9. Experimental and Analytical Study on Uplift Loading Capacity of Strip Plate Anchors Near Sand Slope vol.20, pp.1, 2014, https://doi.org/10.1061/(asce)gm.1943-5622.0001528
  10. Seismic vertical uplift capacity of horizontal strip anchors embedded in sand adjacent to slopes using finite element limit analysis vol.15, pp.1, 2014, https://doi.org/10.1007/s12517-021-09280-9