Corrosion Science and Technology

The Corrosion Science Society of Korea (한국부식방식학회)
권호 표지
DOI QR코드

DOI QR Code

Influence of Annealing Temperature on Microstructure and Pitting Corrosion Behavior of the 27Cr-7Ni Hyper Duplex Stainless Steel

  • Jeon, Soon-Hyeok (Department of Material Science and Engineering, Yonsei University) ;
  • Kim, Hye-Jin (Department of Material Science and Engineering, Yonsei University) ;
  • Kong, Kyeong-Ho (Department of Material Science and Engineering, Yonsei University) ;
  • Park, Yong-Soo (Department of Material Science and Engineering, Yonsei University)
  • Received : 2014.04.29
  • Accepted : 2014.04.29
  • Published : 2014.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

Influence of annealing temperature on the microstructure and resistance to pitting corrosion of the hyper duplex stainless steel was investigated in acid and neutral chloride environments. The pitting corrosion resistance is strongly dependent on the microstructure, especially the presence of chromium nitrides ($Cr_2N$), elemental partitioning behavior and volume fraction of ferrite phase and austenite phase. Precipitation of deleterious chromium nitrides reduces the resistance to pitting corrosion due to the formation of Cr-depleted zone. The difference of PREN (Pitting Resistance Equivalent Number) values between the ferrite and austenite phases was the smallest when solution heat-treated at $1060^{\circ}C$. Based on the results of electrochemical tests and critical crevice temperature tests, the optimal annealing temperature is determined as $1060^{\circ}C$.

Keywords

References

  1. J. Olson and S. Nordin: Proc. Duplex Stainless Steel '86, p. 219 (1986).
  2. E. Perteneder, J. Tosch, P. Reiterer and G. Rabensteiner: Proc. Duplex Stainless Steel '86, p. 48 (1986).
  3. J.-O. Nilsson: Mater. Sci. Technol., 8, 685 (1992). https://doi.org/10.1179/mst.1992.8.8.685
  4. The International Molybdenum Association (IMOA): Practical Guidelines for the Fabrication of Duplex Stainless Steel, (Pergamon Press) p. 1 (2009).
  5. H. Okamoto: Proc. Applications of Stainless Steels'92, Vol. 1, p. 360 (1992).
  6. S. H. Jang, S. T. Kim, I. S. Lee, Y. S. Park: Mater. Trans., 52, 1228 (2011). https://doi.org/10.2320/matertrans.M2010414
  7. J. S. Lee, S. T. Kim, I. S. Lee, G. T. Kim, J. S. Kim, Y. S. Park: Mater. Trans., 53, 1048 (2012). https://doi.org/10.2320/matertrans.M2012008
  8. S. H. Jeon, S. T. Kim, I. S. Lee, G. T. Kim, J. S. Kim, Y. S. Park: Mater. Trans., 52, 416 (2011). https://doi.org/10.2320/matertrans.M2010355
  9. L. Weber, P.J. Uggowitzer, Mater. Sci. Eng. A, 242, 222 (1998). https://doi.org/10.1016/S0921-5093(97)00521-2
  10. H. Tsuge, Y. Tarutani, T. Kodo: Corrosion, 44, 305 (1998).
  11. G. G. Kolchin, B. S. Ermakov, R. I. Grechin, Y. V. Gladnev, Steel USSR, 17, 235 (1987).
  12. L. A. Norstrom, S. Pettersson, S. Nordin, Z. Werkstofftech., 12, 229 (1981). https://doi.org/10.1002/mawe.19810120703
  13. S. Hertzman, B. Lehtinen, E. S. Barrdahl, Application of Stainless Steel, Stockholm, p. 345 (1992).
  14. J. Romu, H. Hanninen, Mater. Sci. Forum, 318, 673 (1999).
  15. Z. Z. Yuan, Q. X. Dai, X. N. Cheng, K. M. Chen, Mater. Charact., 58, 87 (2007). https://doi.org/10.1016/j.matchar.2006.04.005
  16. J. W. Simmons, Mater. Sci. Eng. A, 207, 159 (1996). https://doi.org/10.1016/0921-5093(95)09991-3
  17. H. Y. Ha, H. S. Kwon, Electrochim. Acta, 52, 2175 (2007). https://doi.org/10.1016/j.electacta.2006.08.034
  18. R. A. Perren, T. Suter, C. Solenthaler, G. Gullo, P. J. Uggowitzer, H. Bohni,M. O. Speidel, Corros. Sci., 43, 727 (2001). https://doi.org/10.1016/S0010-938X(00)00088-3
  19. ANNUAL BOOK of ASTM STANDARDS, ASTM G 5.
  20. P. C. Pistorius and G. T. Burstein: Corros. Sci., 33, 1885 (1992). https://doi.org/10.1016/0010-938X(92)90191-5
  21. G. T. Burstein, P. C. Pistorius and S. P. Mattin, Corros. Sci., 35, 57 (1993). https://doi.org/10.1016/0010-938X(93)90133-2
  22. ANNUAL BOOK of ASTM STANDARDS, ASTM G 48-method A
  23. Z. L. Zhang, T. Bell, Surf. Eng., 1, 131 (1985). https://doi.org/10.1179/sur.1985.1.2.131
  24. R. A. Perren, T. A. Suter, P. J. Uggowitzer, L. Weber, R. Magdowski, H. Böhni, M. O. Speidel, Corros. Sci., 43, 707 (2001). https://doi.org/10.1016/S0010-938X(00)00087-1
  25. Migiakis, K., Papadimitriou, J. Mater. Sci., 44, 6372 (2009). https://doi.org/10.1007/s10853-009-3878-9

Cited by

  1. Corrosion Characteristics of Ni-Cr and Co-Cr Alloy Used as a Dental Prosthesis and Its Adhesion to Porcelain vol.15, pp.3, 2016, https://doi.org/10.14773/cst.2016.15.3.141