참고문헌
- R. J. Goldstein and A. Haji-Sheikh, 1967, "Prediction of film cooling effectiveness," Proceedings of Japanese Society of Mechanical Engineers, Semi-International Symposium, Vol. 2, p. 213.
- R. J. Goldstein and E. R. G. Eckert, 1974, "Effects of hole geometry and density on three-dimensional film cooling," Int. J. Heat Mass Transfer, Vol. 17, pp. 595-607. https://doi.org/10.1016/0017-9310(74)90007-6
- Y. Makki and G. Jakubowski, 1986, "An experimental study of film cooling from diffused trapezodial shaped holes, AIAA Vol. 86, p. 1326.
- B. Sen, D. L. Schmidt and D. G. Bogard, 1996, "Film cooling with compound angle holes: heat transfer," J. Turbomach. Vol. 118, p. 800. https://doi.org/10.1115/1.2840937
- C. Bell, H. Hamagawa and P. Ligrani, 2000, "Film cooling from shaped holes," J. Heat Transfer, Vol. 122, No. 2, pp. 224-232. https://doi.org/10.1115/1.521484
- M. Gritsch, W. Colban, H. Schär and K. Dobbeling, 2005, "Effect of hole geometry on the thermal performance of fan-shaped holes," J. Turbomach, Vol. 127, pp. 718-725. https://doi.org/10.1115/1.2019315
- J. Andreopoulos and W. Rodi, 2007, "Experimental investigation of jets in a cross flow," J. Fluid Mech., Vol. 138, pp. 93-127.
- K. Kusterer, D. Bohn, T. Sugimoto and R. Tanaka, 2007, "Double-jet ejection of cooling air for improved film cooling," J. Turbomach, Vol. 129, pp. 809-815. https://doi.org/10.1115/1.2720508
- K. Kusterer, A. Elyas and D. Bohn, 2009, "A parametric study on the influence of the lateral ejection angle of double-jet holes on the film cooling effectiveness for high blowing ratio," Proceedings of ASME Turbo Expo 2009: Power for land, sea and air GT2009 June 8-12, 2009, Orlando, Florida, USA, GT2009-59321.
- K. Kusterer, D. Bohn, T. Sugimoto and R. Tanaka, 2007, "Influence of blowing ratio on the double-jet ejection of cooling air," Proceedins of ASME Turbo Expo 2007: Power for land, sea and air GT2009 May 14-17, 2007, Montreal, Canada, GT2007-27301.
- K. Kusterer, D. Bohn, T. Sugimoto, R. Tanaka and M. Kazari, 2010, "Fiml cooling effectiveness comparison between shaped- and double jet film cooling holes in a row arrangement," Proceedins of ASME Turbo Expo 2010: Power for land, sea and air GT2010 June 14-18, 2010, Glasgow, UK, GT2010-22604.
- K. D. Lee, D. W. Choi, K. Y. Kim, 2013, "Optimization of ejection angles of double-jet film-cooling holes using RBNN model," Int. J. Therm. Sci., Vol. 73, pp. 69-78. https://doi.org/10.1016/j.ijthermalsci.2013.05.015
- L. Graf and L. Kleiser, 2010, "Large eddy simulation of double-row compound-angle film cooling: setup and validation," Computers and Fluids, Vol. 43, pp. 58-67.
- F. R. Menter, M. Kuntz and R. Langtry, 2003, "Ten years of industrial experience with the SST turbulence model," Proceeding of the 4th International Symposium on Turbulence, pp. 632-652.
피인용 문헌
- 2014년 가스·스팀터빈 분야 연구동향 vol.18, pp.2, 2014, https://doi.org/10.5293/kfma.2015.18.2.082