참고문헌
- Ronen, A., Etsion, I., and Kligerman, Y., "Friction- Reducing Surface-Texturing in Reciprocating Automotive Components," Tribology Transactions, Vol. 44, No. 3, pp. 359-366, 2001. https://doi.org/10.1080/10402000108982468
- Brizmer, V., Kligerman, Y., and Etsion, I., "A Laser Surface Textured Parallel Thrust Bearing," Tribology Transactions, Vol. 46, No. 3, pp. 397-403, 2003. https://doi.org/10.1080/10402000308982643
- Etsion, I., "Improving Tribological Performance of Mechanical Components by Laser Surface Texturing," Tribology Letters, Vol. 17, No. 4, pp. 733-737, 2004. https://doi.org/10.1007/s11249-004-8081-1
- Etsion, I., Halperin, G., Brizmer, V., and Kligerman, Y., "Experimental Investigation of Laser Surface Textured Parallel Thrust Bearings," Tribology Letters, Vol. 17, No. 2, pp. 295-300, 2004. https://doi.org/10.1023/B:TRIL.0000032467.88800.59
- Yong, H. and Balendra, R., "CFD Analysis on the Lubrication Behaviours of Journal Bearing with Dimples," Proc. of the ICMA International Conference on Mechatronics and Automation, pp. 1279-1284, 2009.
- Cupillard, S., Glavatskih, S., and Cervantes, M., "Computational Fluid Dynamics Analysis of a Journal Bearing with surface Texturing," Proc. of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Vol. 222, No. 2, pp. 97-107, 2008. https://doi.org/10.1243/13506501JET319
- Tala-Ighil, N., Fillon, M., and Maspeyrot, P., "Effect of Textured Area on the Performances of a Hydrodynamic Journal Bearing," Tribology International, Vol. 44, No. 3, pp. 211-219, 2011. https://doi.org/10.1016/j.triboint.2010.10.003
- Lee, S. M., Lee, D. W., Ha, Y. H., Lee, S. J., Hwang, J. H., et al., "A Study on the Influence of Waviness Error to a Hydrostatic Bearing for a Crankshaft Pin Turner," Tribology Transactions, Vol. 56, No. 6, pp. 1077-1086, 2013. https://doi.org/10.1080/10402004.2013.823532
- Hamrock, B. J., "Fundamentals of Fluid Film Lubrication," McGraw-Hill: New York, 1994.
- Ha, Y. H., "A Study on the Influence of Waviness Error to the Performance of Journal Bearings," Ph.D. Thesis, Department of Precision Mechanical Engineering, Pusan National University, 2013.
피인용 문헌
- A study on Process Characteristics Using Fast Tool Servo based Surface Texturing vol.31, pp.12, 2014, https://doi.org/10.7736/KSPE.2014.31.12.1127
- A Development on the Fault Prognosis of Bearing with Empirical Mode Decomposition and Artificial Neural Network vol.33, pp.12, 2016, https://doi.org/10.7736/KSPE.2016.33.12.985