한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제31권8호
  • /
  • Pages.705-713
  • /
  • 2014
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

피드포워드 제어를 이용한 위상차 보정 속도리플 제어기의 설계

Design of Velocity Ripple Controller using Phase Compensation Feedforward Control

  • 태원형 (서울과학기술대학교 기계시스템디자인공학과) ;
  • 김정한 (서울과학기술대학교 기계시스템디자인공학과) ;
  • 심종엽 (한국기계연구원 첨단생산장비연구본부) ;
  • 오정석 (한국기계연구원 첨단생산장비연구본부) ;
  • 송준엽 (한국기계연구원 첨단생산장비연구본부)
  • Tae, Won-Hyoung (Department of Mechanical System Design Eng., Seoul National Univ. of Sci. & Tech.) ;
  • Kim, Jung-Han (Department of Mechanical System Design Eng., Seoul National Univ. of Sci. & Tech.) ;
  • Shim, Jong-Youp (Advanced Manufacturing Systems Research Division, Korea Institute of Machinery & Materials) ;
  • Oh, Jeong-Seok (Advanced Manufacturing Systems Research Division, Korea Institute of Machinery & Materials) ;
  • Song, Jun-Yeob (Advanced Manufacturing Systems Research Division, Korea Institute of Machinery & Materials)
  • 투고 : 2014.03.03
  • 심사 : 2014.07.01
  • 발행 : 2014.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, we propose a novel velocity ripple controller using phase compensation feedforward control. Velocity ripples result in many kinds of performance degradations in manufacturing machines, especially such as ultra-precision roll lathes. The generation of velocity ripple in constant velocity control comes from various causes, such as electrical torque ripples, mechanical worn out, inconsistent mass center, etc. Conventional researches about ripple is mainly for reducing torque ripple in actuator level, which is only one of reasons for velocity ripples, so in this study, we focus on eliminating velocity ripples in upper level controller using phase compensation feedforward controller. The proposed algorithm is composed of several modules, such as ripple extractor, phase adjuster and phase follower etc. The suggested algorithm can be easily extended, and it shows a superior performance in the experiments of ultra-precision roll lathes.

키워드

참고문헌

  1. Park, I. H., Kim, D. S., and Park, G. S, "A Study on Reducing Cogging Torque by Core Shapes in Permanent Magnet Motors," Journal of Korean Magnetics Society, Vol. 20, No. 2, pp. 61-67, 2010. https://doi.org/10.4283/JKMS.2010.20.2.061
  2. Gulec, M. and Aydin, M., "Reduction of Cogging Torque in Double-Rotor Axial Flux Permanent Magnet Disc Motors: A Review of Cost Effective Magnet Skewing Techniques with Experimental Verification," Proc. of the IEEE Transactions on Industrial Electronics, Vol. 61, No. 9, 2014.
  3. Jang, H. Y., "The Compensation of Torque Ripple of Brushless DC Motor using Feedforward Method," M.Sc. Thesis, Department of Mechanical Engineering, KIST, 1997.
  4. Lee, D.-H. and Ahn, J.-W., "A Wide Range Speed Control Method of Compact High Speed BLDCM using PLL Approach," Proc. of the ICEMS International Conference on Electrical Machines and Systems, pp. 2784-2788, 2008.
  5. Murai, Y., Kawase, Y., Ohashi, K., Nagatake, K., and Okuyama, K., "Torque Ripple Improvement for Brushless DC Miniature Motors," Proc. of the IEEE Transactions on Industry Applications, Vol. 25, No. 3, pp. 441-450, 1989. https://doi.org/10.1109/28.31214
  6. Kwon, K. J. and Kim, S. H., "A Current Control Strategy for Torque Ripple Reduction on Brushless DC Motor during Commutation," Transactions of the Korean Institute of Power Electronics, Vol. 9, No. 3, pp. 195-202. 2004.
  7. Han, J. H. and Kim, J. H., "Automatic Velocity Ripple Compensation Algorithm by Feedforward Control," J. Korean Soc. Precis. Eng., Vol. 30, No. 9, pp. 951-959, 2013. https://doi.org/10.7736/KSPE.2013.30.9.951
  8. Kim, J. H., "Control of Linear Motor using DSP," Tong-Il Pub., pp. 107-109, 2003.
  9. Choi, Y. M, Gweon, D. G., and Lee, M. G., "Adaptive Force Ripple Compensation and Precision Tracking Control of High Precision Linear Motor System," J. Korean Soc. Precis. Eng., Vol. 22, No. 12, pp. 51-60, 2005.
  10. Kim, I.-M., Kim, H.-S., and Song, J.-B., "Design of Joint Torque Sensor with Reduced Torque Ripple for a Robot Manipulator," Int. J. Precis. Eng. Manuf., Vol. 13, No. 10, pp. 1773-1779, 2012. https://doi.org/10.1007/s12541-012-0233-x
  11. Pan, Y.-R., Shih, Y.-T., Horng, R.-H., and Lee, A.-C., "Advanced Parameter Identification for a Linear- Motor-Driven Motion System using Disturbance Observer," Int. J. Precis. Eng. Manuf., Vol. 10, No. 4, pp. 35-47, 2009. https://doi.org/10.1007/s12541-009-0069-1
  12. Hwang, B. S. and Jeon, D. Y., "Modeling and Compensation of Force Ripple for Roll Lathe," Proc. of KSPE Spring Conference, pp. 639-640, 2010.
  13. Yoo, E. J., and Park, Y. W., "Experimental Validation of DC/DC Converter for Ripple Reduction," Proc. of KSPE Autumn Conference, Paper No. 583584, 2010.
  14. Kim, S. H., "DC, AC, BLDC Motor Control," Bok Du Pub., 2010.
  15. Yang, B. S., "Vibration of Rotary Machine," Intervision Pub., 2002.