참고문헌
- Choi, Y. C., Lee, W. S., Park, M. H., and Choi, Y. H., 2011, Heating performance evaluations for development of heat pump system on battery electric vehicle, Proceedings of the KSAE 2011 Autumn Annual Conference, Vol. 11, pp. 559-563.
- Kim, K. Y., Kim, S. C., and Kim, M. S., 2012, Experimental studies on the heating performance of the PTC heater and heat pump combined system in fuel cells and electric vehicles, International Journal of Automotive Technology, Vol. 13, No. 6, pp. 971-977. https://doi.org/10.1007/s12239-012-0099-z
- Lee, D. Y., Cho, C. W., Won, J. P., Park, Y. C., and Lee, M. Y., 2013, Performance characteristics of mobile heat pump for a large passenger electric vehicle, Applied Thermal Engineering, Vol. 50, No. 1, pp. 660-669. https://doi.org/10.1016/j.applthermaleng.2012.07.001
- Woo, H. S., Ahn, J. H., Oh, M. S., Kang, H., and Kim, Y. C., 2013, Study on the heating performance characteristics of a heat pump system utilizing air and waste heat source for electric vehicles, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 25, No. 4, pp. 180-186. https://doi.org/10.6110/KJACR.2013.25.4.180
- Xu, X., Hwang, Y. H., and Radermacher, R., 2011, Refrigerant injection for heat pumping/air conditioning systems: Literature review and challenges discussions, International Journal of Refrigeration, Vol. 34, No. 2, pp. 402-415. https://doi.org/10.1016/j.ijrefrig.2010.09.015
- Heo, J. H., Jeong, M. W., Baek, C. H., and Kim, Y. C., 2011, Comparison of the heating performance of air-source heat pumps using various types of refrigerant injection, International Journal of Refrigeration, Vol. 34, No. 2, pp. 444-453. https://doi.org/10.1016/j.ijrefrig.2010.10.003
- Kim, M. S. and Kim, M. S., 2013, A study of the comparison between vapor injection heat pump systems using a sub-cooler and a flash tank in the performance improvement potential for electric vehicle heating, Proceedings of the KSAE 2013 Spring Annual Conference, Vol. 2013, No. 5, pp. 682-682.
- Heo, J. H., Kang, H., and Kim, Y. C., 2012, Optimum cycle control of a two-stage injection heat pump with a double expansion sub-cooler, International Journal of Refrigeration, Vol. 35, No. 1, pp. 58-67. https://doi.org/10.1016/j.ijrefrig.2011.09.005
- Feng, C., Jiyou, F., Ziwen, X., and Liansheng, L., 2009, Study on performance of a heat pump water heater using suction stream liquid injection, Applied Thermal Engineering, Vol. 29, No. 14-15, pp. 2942-2948. https://doi.org/10.1016/j.applthermaleng.2009.03.001
- Roh, C. W., Yoo, J. W., and Kim, M. S., 2014, Vapor refrigerant injection techniques for heat pump systems: the latest literature review and discussion, International Journal of Air-Conditioning and Refrigeration, Vol. 22, No. 1, pp. 1430002-1-1430002-9. https://doi.org/10.1142/S201013251430002X
- Aikins, K. A., Lee, S. H., and Choi, J. M., 2013, Technology review of two-stage vapor compression heat pump system, International Journal of Air-Conditioning and Refrigeration, Vol. 21, No. 3, pp. 1330002-1-1330002-14. https://doi.org/10.1142/S2010132513300024
- Heo, J. H., 2010, The heating performance improvement of two-stage heat pumps with the vapor injection technique, Ph.D. thesis, Korea University, Seoul, Korea.
피인용 문헌
- Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2014 vol.27, pp.7, 2015, https://doi.org/10.6110/KJACR.2015.27.7.380