참고문헌
- Cattani-Lorente M, Scherrer SS, Ammann P, Jobin M, Wiskott HW. Low temperature degradation of a Y-TZP dental ceramic. Acta Biomater 2011;7:858-65. https://doi.org/10.1016/j.actbio.2010.09.020
- Yilmaz H, Nemli SK, Aydin C, Bal BT, Tiras T. Effect of fatigue on biaxial flexural strength of bilayered porcelain/zirconia (Y-TZP) dental ceramics. Dent Mater 2011;27:786-95.
- Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials 1999;20:1-25. https://doi.org/10.1016/S0142-9612(98)00010-6
- Kohorst P, Borchers L, Strempel J, Stiesch M, Hassel T, Bach FW, Hubsch C. Low-temperature degradation of different zirconia ceramics for dental applications. Acta Biomater 2012;8:1213-20. https://doi.org/10.1016/j.actbio.2011.11.016
- Yang G, Li JC, Wang GC, Yashima M, Min SL, Chen TC. Investigation on strengthening and toughening mechanisms of Ce-TZP/Al2O3 nanocomposites. J Metall Mater Trans A 2006;37:1969-75. https://doi.org/10.1007/s11661-006-0139-2
- Mangalaraja RV, Chandrasekhar BK, Manohar P. Effect of ceria on the physical, mechanical and thermal properties of yttria stabilized zirconia toughened alumina. Mater Sci Eng A 2003;343:71-5. https://doi.org/10.1016/S0921-5093(02)00368-4
- Nawa M, Nakamoto S, Sekino T, Niihara K. Tough and strong Ce-TZP/Alumina nanocomposites doped with titania. Ceram Int 1998;24:497-506. https://doi.org/10.1016/S0272-8842(97)00048-5
- Ban S. Reliability and properties of core materials for all-ceramic dental restorations. Jpn Dent Sci Rev 2008;44:3-21. https://doi.org/10.1016/j.jdsr.2008.04.001
-
Tanaka K, Tamura J, Kawanabe K, Nawa M, Uchida M, Kokubo T, Nakamura T. Phase stability after aging and its influence on pin-on-disk wear properties of Ce-TZP/
$Al_2O_3$ nanocomposite and conventional Y-TZP. J Biomed Mater Res A 2003;67:200-7. -
Nawa M, Bamba N, Sekino T, Niihara K. The effect of
$TiO_2$ addition on strengthening and toughening in intragranular type of 12Ce-TZP/$Al_2O_3$ nanocomposites. J Eur Ceram Soc 1998;18:209-19. https://doi.org/10.1016/S0955-2219(97)00116-7 -
Ban S, Sato H, Suehiro Y, Nakanishi H, Nawa M. Biaxial flexure strength and low temperature degradation of Ce-TZP/
$Al_2O_3$ nanocomposite and Y-TZP as dental restoratives. J Biomed Mater Res B Appl Biomater 2008;87:492-8. - Hirano M, Inada H. Fracture toughness, strength and Vickers hardness of yttria-ceria-doped tetragonal zirconia/alumina composites fabricated by hot isostatic pressing. J Mater Sci 1992;27:3511-8. https://doi.org/10.1007/BF01151827
-
Fischer J, Stawarczyk B. Compatibility of machined Ce-TZP/
$Al_2O_3$ nanocomposite and a veneering ceramic. Dent Mater 2007;23:1500-5. https://doi.org/10.1016/j.dental.2007.01.005 - Borchers L, Stiesch M, Bach FW, Buhl JC, Hubsch C, Kellner T, Kohorst P, Jendras M. Influence of hydrothermal and mechanical conditions on the strength of zirconia. Acta Biomater 2010;6:4547-52. https://doi.org/10.1016/j.actbio.2010.07.025
-
Perdigao J, Pinto AM, Monteiro RC, Braz Fernandes FM, Laranjeira P, Veiga JP. Degradation of dental
$ZrO_2$ -based materials after hydrothermal fatigue. Part I: XRD, XRF, and FESEM analyses. Dent Mater J 2012;31:256-65. https://doi.org/10.4012/dmj.2011-216 - Pittayachawan P, McDonald A, Petrie A, Knowles JC. The biaxial flexural strength and fatigue property of Lava Y-TZP dental ceramic. Dent Mater 2007;23:1018-29. https://doi.org/10.1016/j.dental.2006.09.003
- Ban S, Suehiro Y, Nakanishi H, Nawa M. Fracture toughness of dental zirconia before and after autoclaving. J Ceram Soc Jpn 2010;118:406-9. https://doi.org/10.2109/jcersj2.118.406
- Sato H, Yamada K, Pezzotti G, Nawa M, Ban S. Mechanical properties of dental zirconia ceramics changed with sandblasting and heat treatment. Dent Mater J 2008;27:408-14. https://doi.org/10.4012/dmj.27.408
- Nakamura T, Yamashita K, Neo M. Mechanical properties of zirconia/alumina nano-composite after soaking in various water-based conditions. Key Eng Mater 2006;309-11:1219-22. https://doi.org/10.4028/www.scientific.net/KEM.309-311.1219
-
Takano T, Tasaka A, Yoshinari M, Sakurai K. Fatigue strength of Ce-TZP/
$Al_2O_3$ nanocomposite with different surfaces. J Dent Res 2012;91:800-4. https://doi.org/10.1177/0022034512452277 - Gale MS, Darvell BW. Thermal cycling procedures for laboratory testing of dental restorations. J Dent 1999;27:89-99. https://doi.org/10.1016/S0300-5712(98)00037-2
- Fontijn-Tekamp FA, Slagter AP, Van Der Bilt A, Van 'T Hof MA, Witter DJ, Kalk W, Jansen JA. Biting and chewing in overdentures, full dentures, and natural dentitions. J Dent Res 2000;79:1519-24. https://doi.org/10.1177/00220345000790071501
- ISO 6872. Dentistry-ceramic materials. Geneva; Switzerland; International Organization for Standardization; 2008.
- Garvie RC, Nicholoson PS. Phase analysis in zirconia systems. J Am Ceram Soc 1972;55:303-5. https://doi.org/10.1111/j.1151-2916.1972.tb11290.x
- Kim BK, Hahn JW, Han KR. Quantitative phase analysis in tetragonal-rich tetragonal/monoclinic two phase zirconia by Raman spectroscopy. J Mater Sci Lett 1997;16:669-71. https://doi.org/10.1023/A:1018587821260
- Bona AD, Anusavice KJ, DeHoff PH. Weibull analysis and flexural strength of hot-pressed core and veneered ceramic structures. Dent Mater 2003;19:662-9. https://doi.org/10.1016/S0109-5641(03)00010-1
- Studart AR, Filser F, Kocher P, Gauckler LJ. Fatigue of zirconia under cyclic loading in water and its implications for the design of dental bridges. Dent Mater 2007;23:106-14. https://doi.org/10.1016/j.dental.2005.12.008
- Karakoca S, Yilmaz H. Influence of surface treatments on surface roughness, phase transformation, and biaxial flexural strength of Y-TZP ceramics. J Biomed Mater Res B Appl Biomater 2009;91:930-7.
- Gupta TK, Lange FF, Bechtold JH. Effect of stress-induced phase transformation on the properties of polycrystalline zirconia containing metastable tetragonal phase. J Mater Sci 1978;13:1464-70. https://doi.org/10.1007/BF00553200
- Kailer A, Nickel KG, Gogotsi YG. Raman microspectroscopy of nanocrystalline and amorphous phases in hardness indentations. J Raman Spectrosc 1999;30:939-46. https://doi.org/10.1002/(SICI)1097-4555(199910)30:10<939::AID-JRS460>3.0.CO;2-C
- Behrens G, Dransmann GW, Heuer AH. On the isothermal martensitic transformation in 3Y-TZP. J Am Ceram Soc 1993;76:1025-30. https://doi.org/10.1111/j.1151-2916.1993.tb05330.x
- Nemli SK, Yilmaz H, Aydin C, Bal BT, Tiras T. Effect of fatigue on fracture toughness and phase transformation of Y-TZP ceramics by X-ray diffraction and Raman spectroscopy. J Biomed Mater Res B Appl Biomater 2011 Nov 21.
피인용 문헌
- Influence of Different Framework Designs on the Fracture Properties of Ceria-Stabilized Tetragonal Zirconia/Alumina-Based All-Ceramic Crowns vol.9, pp.5, 2016, https://doi.org/10.3390/ma9050339
- Layered Manufacturing of Dental Ceramics: Fracture Mechanics, Microstructure, and Elemental Composition of Lithography-Sintered Ceramic pp.1059941X, 2019, https://doi.org/10.1111/jopr.12748
- The Effect of in vitro Aging and Fatigue on the Flexural Strength of Monolithic High-translucency Zirconia Restorations vol.19, pp.7, 2014, https://doi.org/10.5005/jp-journals-10024-2349