참고문헌
- Anselmo Eduardo etc., "Turning of hardened steel with interrupted and semi-interrupted cutting", Journal of Material Processing Technology, 159, pp.240-248, 2005 https://doi.org/10.1016/j.jmatprotec.2004.05.011
- Vitor Augusto A. De Godoy etc., "Turning of interrupted and continuous hardened steel surface using ceramic and CBN cutting tools", Journal of Material Processing Technology, 211, pp.1014-1025, 2011 https://doi.org/10.1016/j.jmatprotec.2011.01.002
- Radu Pavel etc.,"Effect of tool wear on surface finish for a case of continuous and interrupted hard turning", Journal of Material Processing Technology, 170, pp.341-349, 2005 https://doi.org/10.1016/j.jmatprotec.2005.04.119
- B. C Lee, I. S Kang etc., "Machinability Evaluation of Interrupted Cutting in SCM420 Steel by Using Coated and Uncoated Tool", KSMPE proceeding '04, pp.82-87, 2004
- D. W Kim, Y. J Cho etc., "Wear of Partially Coated Tool in Interrupted Cutting", KSPE proceeding '95, pp. 67-72, 1995.
- M. I Bae, "Surface Roughness Variation of Interruped Cutting in SM45C Using Coated Tool", Proceeding of the KSMPE spring Conference 2014, pp. 31, 2014
- Y. Kevin Chou, Chris J. Evans., "Cubic Boron nitride tool wear in interrupted hard cutting", Wear 225-229, pp.234-245, 1999 https://doi.org/10.1016/S0043-1648(99)00012-5
- S. H. Park., "Modern Design of Experiments", Ming Young Sa, pp. 423-496, 1996
피인용 문헌
- Observation of Chip Shape and Tool Damage with Interrupted Cutting of Carbon Steel for Machine Structures(SM20C) vol.17, pp.2, 2018, https://doi.org/10.14775/ksmpe.2018.17.2.103
- Surface Roughness Prediction of Interrupted Cutting in SM20C vol.16, pp.6, 2014, https://doi.org/10.17958/ksmt.16.6.201412.2021
- 3D 프린팅시스템과 CAM시스템을 활용한 금형가공에 관한 연구 vol.18, pp.6, 2014, https://doi.org/10.9726/kspse.2014.18.6.091
- Prediction of Surface Roughness and Electric Current Consumption in Turning Operation using Neural Network with Back Propagation and Particle Swarm Optimization vol.14, pp.3, 2014, https://doi.org/10.14775/ksmpe.2015.14.3.065
- 기계구조용 탄소강(SM45C)의 단속절삭 시 절삭력예측을 위한 회귀방정식 도출 vol.15, pp.4, 2014, https://doi.org/10.14775/ksmpe.2016.15.4.040
- A Study on the Cutting Force of Carbon Steel for a Machine Structure(SM20C) vol.18, pp.4, 2014, https://doi.org/10.17958/ksmt.18.4.201608.503
- Tribological Characteristics and Corrosion Resistance of SM45C for Mechanical Structural Steel vol.23, pp.1, 2014, https://doi.org/10.9726/kspse.2019.23.1.027