참고문헌
- K. D. Park and Y. B. Jin, 'The Effect of Compressive Residual Stress on Fatigue Fracture of the Spring steel', KSMPE, Vol. 3, No. 3, pp. 79-85, 2004
- D. H. Choi, 'The Effect of Sub-groove on The Stress Concentration Reduction of the Axle Shaft according to the Angle Change', Proceeding of the KSMPE Autumn Conference', pp.49-50, 2010
- O. S. Ko and W. N. Choi, 'Door Checker Arm Surface Profile Design for Optimum Door Effort', Hyundai Motor Review, Vol.2, No.1, pp.114-125, 1994
- S. J. Kang, Development of Design Program for Checker Arm Shape', Technical Report, Catholic University of Daegu, pp. 17-19, 2003
- K. T. Kwak, S. M. Kim and K. H. Cho, 'A Theoretical Study on the Profile of Door Checker Arm and Door Operating Force for Spring Roller and Hybrid Type', Annual Conference Proceedings, KSAE, pp.2247-2252, 2009
- C. W. Kim and S. J. Kang, 'Analysis of Door Effort using 2D Model', Transactions of KSAE, Vol. 11, No.3, pp.131-137, 2003
- J. H. Son, S. B. Hur, J. C. Oh, S. G. Byun and H. D. Cho, 'Optimization & Design Factors of door latch for improved feeling of door open & close', KSAE13-G0017, pp. 15-18, 2013
피인용 문헌
- 대형 산업 차량에 적용되는 유성기어형 고감속 중간변속기 구현에 관한 연구 vol.14, pp.6, 2015, https://doi.org/10.14775/ksmpe.2015.14.6.014
- 용접형 대차 프레임의 피로강도 보강에 관한 연구 vol.15, pp.5, 2016, https://doi.org/10.14775/ksmpe.2016.15.5.145
- 철도객차용 크로스 빔의 경량화 설계에 관한 연구 vol.16, pp.5, 2017, https://doi.org/10.14775/ksmpe.2017.16.5.126
- 고소작업대의 파손된 고정볼트의 피로분석에 관한 연구 vol.34, pp.5, 2014, https://doi.org/10.14346/jkosos.2019.34.5.1
- 자전거 핸들의 강도 해석에 의한 내구성 연구 vol.18, pp.10, 2019, https://doi.org/10.14775/ksmpe.2019.18.10.001
- 사이드 볼스터의 강도 해석을 통한 융합 연구 vol.11, pp.1, 2020, https://doi.org/10.15207/jkcs.2020.11.1.169
- Structural Safety by Shape of Motorcycle Muffler vol.19, pp.1, 2014, https://doi.org/10.14775/ksmpe.2020.19.01.072
- Durability Analysis of Automotive Seat Frame by Shape vol.19, pp.3, 2014, https://doi.org/10.14775/ksmpe.2020.19.03.014
- 차종별 차량 옆문의 충돌 해석에 관한 융합 연구 vol.11, pp.4, 2020, https://doi.org/10.15207/jkcs.2020.11.4.173
- Durability Analysis due to Design Shape of Pinion Gear vol.19, pp.7, 2014, https://doi.org/10.14775/ksmpe.2020.19.07.016
- A Durability Investigation on Automotive Front Bumper Guard vol.19, pp.8, 2014, https://doi.org/10.14775/ksmpe.2020.19.08.001
- 자동차 서포트빔의 구조해석에 대한 융합 연구 vol.11, pp.9, 2014, https://doi.org/10.15207/jkcs.2020.11.9.169
- Durability Analysis of Automotive Seat According to the Shape of Seat Back Frame vol.19, pp.10, 2014, https://doi.org/10.14775/ksmpe.2020.19.10.016
- 경차와 대형차에서의 스테빌라이저들의 구조해석에 관한 융합연구 vol.12, pp.2, 2021, https://doi.org/10.15207/jkcs.2021.12.2.173