DOI QR코드

DOI QR Code

Rheological Studies, Physico-Mechanical Properties, Thermal Properties and Morphology of PVC/Waste-Gypsum Composites

  • Nguyen, Vu-Giang (Vietnamese Academy of Science and Technology (VAST), Institute for Tropical Technology) ;
  • Kang, Hae-Jun (Department of Polymer Science and Engineering, Sunchon National University) ;
  • Kang, Sang-Yong (Department of Polymer Science and Engineering, Sunchon National University) ;
  • Jung, Da-Woon (Department of Polymer Science and Engineering, Sunchon National University) ;
  • Ko, Jin-Whoan (Department of Polymer Science and Engineering, Sunchon National University) ;
  • Thai, Hoang (Vietnamese Academy of Science and Technology (VAST), Institute for Tropical Technology) ;
  • Do, Quang-Tham (Vietnamese Academy of Science and Technology (VAST), Institute for Tropical Technology) ;
  • Kim, Myung-Yul (Department of Polymer Science and Engineering, Sunchon National University)
  • 투고 : 2014.02.25
  • 심사 : 2014.06.29
  • 발행 : 2014.06.30

초록

The effect of addition of gypsum on the rheology, physico-mechanical properties, thermal properties and morphology development of polymer composites based on polyvinyl chloride (PVC) and waste-gypsum with and without methylene-butadiene-styrene (MBS) has been studied. It was shown that the replacement of gypsum for methylene-butadiene-styrene (MBS) component in PVC/gypsum polymer composites enhanced the tensile strength and stiffness of composites, but gradually decreased its impact strength. The observation of morphology, the results of the physico-mechanical properties and thermal properties proved simultaneously that PVC/gypsum composite with the waste-gypsum content of 22.56 wt% reached the optimum results among five kinds of PVC/gypsum polymer composite materials investigated.

키워드

참고문헌

  1. Nadagouda, M.N., Pressman, J., White, C., Speth, T.F., and McCurry, D.L., "Novel Thermally Stable Poly(vinyl chloride) Composites for Sulfate Removal", Journal of Hazardous Materials, Vol. 188, 2011, pp. 19-25. https://doi.org/10.1016/j.jhazmat.2011.01.005
  2. Etienne, S., Becker, C., Ruch, D., Germain, A., and Calberg, C., "Synergetic Effect of Poly(vinyl butyral) and Calcium Carbonate on Thermal Stability of Poly(vinyl chloride) Nanocomposites Investigated by TG-FTIR-MS", Journal of Thermal Analysis and Calorimetry, Vol. 100, 2010, pp. 667-677. https://doi.org/10.1007/s10973-009-0443-3
  3. Kim, M.Y., Ha, D.S., Park, Y.H., Nah, J.W., and Choi, C.Y., "Mechanical Properties of PVC Complexes Using Waste-Gypsum", Elastomer(Korea), Vol. 37, 2002, pp. 7-13.
  4. Steller, R., Kedziora, G., Trojanowska-Tomczak, M., Ciesla, K., and Skorupski, J., "Polymer Based Composites with Inter-penetrating Networks Structure", Journal Chemistry & Chemicial Technology, Vol. 7, No. 2, 2013, pp. 181-184.
  5. Koning, C., van Duin, M., Pagnoulle, C., and Jerome, R., "Strategies for Compatibilization of Polymer Blends", Progress in Polymer Science, Vol. 23, 1998, pp. 707-757. https://doi.org/10.1016/S0079-6700(97)00054-3
  6. Sadat-Shojai, M., and Gholam-Reza, B., "Recycling of PVC wastes", Polymer Degradation and Stability, Vol. 96, 2011, pp. 404-415. https://doi.org/10.1016/j.polymdegradstab.2010.12.001
  7. Deka, B.K., and Maji, T.K., "Study on the Properties of Nanocomposite Based on High Density Polyethylene, Polypropylene, Polyvinyl Chloride and Wood", Compos Part A.: Applied Science and Manufacturing, Vol. 42, 2011, pp. 686-693. https://doi.org/10.1016/j.compositesa.2011.02.009
  8. Luo, Z., and Jiang, J., "Molecular Dynamics and Dissipative Particle Dynamics Simulations for the Miscibility of Poly(ethylene oxide)/poly(vinyl chloride) Blends", Polymer, Vol. 51, 2010, pp. 291-299. https://doi.org/10.1016/j.polymer.2009.11.024
  9. El-Shekeil, Y.A., Sapuan, S.M., Jawaid, M., and Al-Shuja, O.M., "Influence of Fiber Content on Mechanical, Morphological and Thermal Properties of Kenaf Fibers Reinforced Poly(vinyl chloride)/thermoplastic Polyurethane Poly-blend Composites", Materials & Design, Vol. 58, 2014, pp. 130-135. https://doi.org/10.1016/j.matdes.2014.01.047
  10. Pederson, B., Semmingsen, D., and Crystallogr, A., "Neutron Diffraction Refinement of the Structure of Gypsum, $CaSO_4{\cdot}2H_2O$", Acta Crystallographica: Section B, Vol. 38, 1982, pp. 1074-1077. https://doi.org/10.1107/S0567740882004993
  11. Mcmurdie, H., Morris, M., Evans, E., Paretzkin, B., Wong-Ng, W., and Hubbard, C., "Standard X-ray Diffraction Powder Patterns from the JCPDS Research Associateship", Powder Diffraction Journal, Vol. 1, 1986, pp. 265-275. https://doi.org/10.1017/S0885715600011829
  12. Oftedal, I., J. Phys. Chem, Vol. 128, 1972, pp. 154.
  13. Martin, K., and McCarthy, G., ICDD Grant-in-Aid, North Dakota State Univ. Press, USA, 1990.
  14. Kotaki, M., Kuriyama, T., Narisawa, I., Sakai, M., and Abe, K., "Morphology Control of Vinyl Ester/sebs Blends with Ultrafine Inorganic Particles", Key Engineering Materials, Trans Tech Publications, Switzerland, Vol. 137, 1998, pp 9-15. https://doi.org/10.4028/www.scientific.net/KEM.137.9

피인용 문헌

  1. Characterization of processing, rheological and dynamic mechanical thermal properties of PVC stabilized with polyphenol-based thermal stabilizer vol.139, pp.1, 2014, https://doi.org/10.1007/s10973-019-08365-8