한국컴퓨터정보학회논문지 (Journal of the Korea Society of Computer and Information)

  • 제19권6호
  • /
  • Pages.93-100
  • /
  • 2014
  • /
  • 1598-849X(pISSN)
  • /
  • 2383-9945(eISSN)
한국컴퓨터정보학회 (Korean Society of Computer Information)
권호 표지
DOI QR코드

DOI QR Code

실내 충격소음 측정시스템 구현에 관한 연구

A study of the measurement systems implementation for the interior impulse noise

  • 투고 : 2014.05.22
  • 심사 : 2014.06.11
  • 발행 : 2014.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구의 목적은170dB 이상의 고충격 소음원에서 실내 충격소음을 측정 평가 할 수 있는 측정시스템 구축 방법을 제안하는데 있다. 이러한 목적을 달성하기 위하여 실내충격소음 측정시스템용 시험장을 설계 및 구현하고, 충격소음 측정용 마이크로폰, Head & Torso Simulator, Ear Simulator를 구성하였다. 충격소음 측정 시 정확한 측정을 위하여 3가지 측정방법을 동시에 측정할 수 있도록 구현하였으며, 정확성과 신뢰성을 위하여 3가지의 실내충격소음 측정값을 상호 비교하였다. 3가지 측정방법에 따른 최대 음압레벨과 옥타브 밴드 결과를 비교 분석함으로써 실내 충격소음의 주파수 특성에 따른 차이점을 확인하였다. 이러한 결과는 반사파의 영향에 의한 것으로 판단된다. 이에, 시험장의 크기를 변형하면서 측정할 수 있도록 실내 충격소음 측정시스템을 구현하였다. 본 시스템 구현을 통하여, 충격 소음원의 특징분석과 해당 주파수별 스펙트럼의 반사파 영향들을 파악할 수 있을 것이며, 향후, 실내 충격소음에 대한 데이터 획득 및 분석을 위하여 유용하게 활용될 수 있을 것으로 판단된다.

The objective of this study is to propose the measurement system implementation method for the evaluation and measurement of the indoor-impulsive over 170 dB noise source. For the purpose of measuring impulse noise, design and implementation constructed followed subsystems of the testing center, microphone, ear simulator, head and torso simulator and so on. Measurement systems for the accuracy and reliability of impulse noise are implemented when measuring 3 ways of measurements method by the simultaneous measurement system design. For the accuracy and reliability of three mutually indoor-impulse noise measurements were compared, three kinds of measuring methods in accordance with the peak sound pressure level and octave band. Comparing the results of data, the indoor-impulse noise by analyzing a frequency characteristic was validated in difference for the statistical significance. Result are determined by the influence of the reflected wave. Therefore, the flexible size of the interior test site while interior impulse noise measurement system was constructed. Throughout this system can be affected by parameters that are the impulse noise source and the corresponding frequency-characteristic analysis to determine the spectrum of the reflected wave. And, in the near future, indoor impulse noise measurement systems for acquisition and analysis are utilized in useful data.

키워드

참고문헌

  1. Song K.H., W.R. Kang, D.J. Lee, B.H. Kong, S.G. Lee, S.S. Jeong, J.H. Park. "Experimental Study on Impulse Noise from Enclosures." The Korean Society of Propulsion Engineers Fall Conference, pp.148-149, 2013. 6.
  2. Song K.H., J.S. Chang, C.H. Cho, D.J. Lee, S.S. Jeong, and H.S. Yoon. "Experimental Study on Impulse Noise and Performance of Hearing Protectors." 16th Proceedings of the Korea Institute of Military Science and Technology Conference Guided Weapons System, pp.302-306, 2012. 6.
  3. Song, K.H., and S.H. Chung. "A Study of Impulse Noise for the Blocking Earplug Performance by Frequency Levels." The Korean Society of Computer and Information Winter Conference, pp.125-126, 2014. 1.
  4. Song, K.H., and S.H. Chung. 2014. "An Empirical Review of the Measurement Method for the Impulse Noise using Ear Simulator." The Korean Society of Computer and Information Winter Conference, pp.127-128, 2014. 1.
  5. Patterson J. H., and Johnson D. L., "Temporary Threshold Shifts Produced by High Intensity Freefield Impulse Niose in Humans Wearing Hearing Protection", USAARL Report No.94-46, pp.7-13, 1994. 8.
  6. Matti E Ylikoski, Jussi O Pekkarinen, "Physical Characteristics of Gunfire Impulse Noise and Its Attenuation by Hearing Protectors", Scand Adiol, No. 24, pp.3-11, 1995. 6.
  7. Buck K., "Performance of Hearing Protectors in Impulse Noise", RTO HFM Lecture Series, 2000. 6.
  8. Richard G. Price, "Firing Recoilless Weapons from Enclosures", Technical Memorandum 20-91, U.S. Army Human Engineering Laboratory, Aberdeen Proving Ground, MD, pp.39-48, 1991. 5.
  9. Richard G. Price, "Firing from Enclosures with 90mm Recoilless Rifle : Assessment of Acoustic Hazard", Technical Memorandum 11-78, U.S. Army Human Engineering Laboratory, Aberdeen Proving Ground, MD, pp.1-14, 1978. 6.
  10. Hard Leight Lab, "Assessing Fit Effectiveness of Earplugs", Hard Leight Acoustical Laboratory, pp.1-7, 2008. 5.
  11. K Amrein, B.E. and Letowski, T.R. "High level impulse sounds and human hearing: Standards, physiology, quantification." ARL Technical Report ARL-TR-6017, U.S. Army Research Laboratory, Aberdeen Proving Ground, MD. pp.1-12. 2012. 1.
  12. Amrein, B.E. and Letowski, T.R. "Military noise limits: How much is too much?", Proceedings of the 41st International Congress and Exposition on Noise Control Engineering (Inter-Noise 2012), New York, pp.212-216, 2012. 1.
  13. Price, G.R. "Impulse noise hazard: From theoretical understanding to engineering solutions." Noise Control Engineering Journal, 60 (3), pp.301-312, 2012. 5. https://doi.org/10.3397/1.3701007