Journal of Institute of Control, Robotics and Systems (제어로봇시스템학회논문지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지
DOI QR코드

DOI QR Code

Comparison Among Yaw and Roll Motion Controllers for Rollover Prevention

차량 전복 방지를 위한 롤 및 요 운동 제어기의 성능 비교

  • Yim, Seongjin (Department of Mechanical and Automotive Engineering, Seoul National University of Science and Technology)
  • 임성진 (서울과학기술대학교 기계자동차공학과)
  • Received : 2014.03.06
  • Accepted : 2014.04.11
  • Published : 2014.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

This article presents a comparison among several yaw and roll motion controllers for vehicle rollover prevention. In the previous research, yaw and roll motion controllers can be independently designed for rollover prevention. Following this idea, several yaw and roll motion controllers are designed and compared in terms of rollover prevention. For the yaw motion control, PID, LQR, SMC (Sliding Mode Control) and TDC (Time-Delay Control) are adopted. For the roll motion control, LQR, LQ SOF (Static Output Feedback) control, PID, and SMC are adopted. To compare the performance of each controller, simulation is performed on a vehicle simulation package, CarSim$^{(R)}$. From simulation, TDC and LQ SOF are the best for yaw and roll motion control, respectively.

Keywords

References

  1. National Highway Traffic Safety Administration., "Motor vehicle traffic crash injury and fatality estimates, 2002 early assessment," NCSA (National Center for Statistics and Analysis) Advanced Research and Analysis, 2003.
  2. B. Chen and H. Peng, "Differential-braking-based rollover prevention for sports utility vehicles with human-in-the-loop evaluations," Vehicle System Dynamics, vol. 36, no. 4-5, pp. 359-389, 2001. https://doi.org/10.1076/vesd.36.4.359.3546
  3. A. Y. Ungoren and H. Peng, "Evaluation of vehicle dynamic control for rollover prevention," International Journal of Automotive Technology, vol. 5, no. 2, pp. 115-122, 2004.
  4. J. Yoon, K. Yi, and D. Kim, "Rollover index-based rollover mitigation system," International Journal of Automotive Technology, vol. 7, no.7, pp. 821-826, 2006.
  5. S. Yim, Y. Park, and K. Yi, "Design of active suspension and electronic stability control for rollover prevention," International Journal of Automotive Technology, vol. 11, no. 2, pp. 147-153, 2010. https://doi.org/10.1007/s12239-010-0020-6
  6. S. Yim, K. Jeon, and K. Yi, "An investigation into vehicle rollover prevention by coordinated control of active anti-roll bar and electronic stability program," International Journal of Control, Automation, and Systems, vol. 10, no. 2, pp. 275-287, 2012. https://doi.org/10.1007/s12555-012-0208-9
  7. S. Yim, C. W. Yim, and M.-H. Oh, "An investigation into the structures of linear quadratic controllers for vehicle rollover prevention," Proc. of IMechE, Part D, Journal of Automobile Engineering, vol. 227, no. 4, pp. 472-480, 2013. https://doi.org/10.1177/0954407012459462
  8. Mechanical Simulation Corporation, CarSim User Manual, Version 5, 2001.
  9. A. E. Bryson and Y. C. Ho, Applied Optimal Control, New York: Hemisphere, 1975.
  10. N. Hansen, S. D. Muller, and P. Koumoutsakos, "Reducing the time complexity of the derandomized evolution strategy with covariance matrix adaptation (CMA-ES)," Evolutionary Computation, vol. 11, no. 1, pp. 1-18, 2003. https://doi.org/10.1162/106365603321828970
  11. F. Zheng, Q.-G. Wang, and T. H. Lee, "On the design of multivariable PID controllers via LMI approach," Automatica, vol. 38, pp. 517-526, 2002. https://doi.org/10.1016/S0005-1098(01)00237-0