DOI QR코드

DOI QR Code

상용차용 디젤엔진의 Engine ECU_ILS 시스템 개발

Development of Engine ECU_ILS System for Diesel Engine of Commercial Vehicle

  • 고영진 (전북자동차기술원 선행기술연구팀)
  • Ko, Youngjin (Advanced Technology Research Team, Jeonbuk Institute of Automotive Technology)
  • 투고 : 2013.10.07
  • 심사 : 2014.01.03
  • 발행 : 2014.07.01

초록

The automobile industry requires technological innovations to reduce fuel consumption with the public interest in environmental conservation in recent years. Thus, the hybrid system is applied not only to passenger cars but also commercial vehicles. The purpose of this paper is to develop engine ECU_ILS to develop commercial hybrid vehicles. In order to develop the engine and vehicle, the dynamometer and exhaust gas analyzer is needed. However, a lot of time and cost are required. In contrast, the model-based development environment that can be applied to a variety of test conditions can reduce development time. Therefore, a HILS system environment that can consider the behavior of actual vehicles for evaluation of the control logic, fuel consumption and exhaust gas is required. This engine ECU_ILS system was developed in this study, can analyze parameter such as the fuel injection rate, fuel injection time, fuel consumption and exhaust gas like the actual vehicle test using map data. Also, this system is expected to be able to analyze the characteristic of vehicle behavior and the development of peripheral device in relation to engine and vehicles. This HILS system can be used to develop control strategies of commercial hybrid vehicle systems in the future.

키워드

참고문헌

  1. Y. Ko, S. Cho, K. Park and Y. Ro, "Commercial HEV Performance Simulation Model Development," KSAE Annual Conference Proceedings, pp.2024-2029, 2008.
  2. M. Yoon, W. Lee and M. Sunwoo, "Development and Implementation of Distributed Hardware-in-the-loop Simulator for Automotive Engine Control System," Int. J. Automotive Technology, Vol.6, No.2, pp.107-117, 2005.
  3. J. Youn, J. Ma, M. Sunwoo and W. Lee, "Model Based Design and Validation of Control Systems using Real-time Operating System," Transactions of KSAE, Vol.16, No.2, pp.8-17, 2008.
  4. K. Morita, K. Shimamura, S. Yamaguchi, K. Furumachi, N. Osaki, S. Nakamura, K. Narusawa and K. J. Myong, "Development of a Fuel Economy and Exhaust Emissions Test Method with HILS for Heavy-duty HEVs," SAE 2008-01-1318, 2008.
  5. M. Kim, G. Lee, J. Lee, J. Lee, H. Yoo and M. Kim, "Analysis of Hydraulic Characteristics and Modelling of Piezo Actuator for High Pressure Fuel Injection," KSAE Spring Conference Proceedings, pp.315-319, 2011.
  6. I. Jo, J. Lee and J. Lee, "Characteristic Evaluation of Analytic Model Based on AMESim for CRDI Injector," KSAE Annual Conference Proceedings, pp.321-326, 2011.
  7. Opal-RT Technologies Inc., RT-LAB User's Guide, 2009.
  8. Opal-RT Technologies Inc., RT-EVENT User's Guide, 2009.