Earthquakes and Structures

  • 제6권6호
  • /
  • Pages.627-646
  • /
  • 2014
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Numerical simulation of an adobe wall under in-plane loading

  • Nicola, Tarque (Department of Engineering, Division of Civil Engineering, Pontificia Universidad Catolica del Peru) ;
  • Guido, Camata (Department of Engineering and Geology, University 'G. D'Annunzio' Chieti-Pescara) ;
  • Humberto, Varum (Department of Civil Engineering, University of Aveiro) ;
  • Enrico, Spacone (Department of Engineering and Geology, University 'G. D'Annunzio' Chieti-Pescara) ;
  • Marcial, Blondet (Department of Engineering, Division of Civil Engineering, Pontificia Universidad Catolica del Peru)
  • 투고 : 2013.10.30
  • 심사 : 2014.03.03
  • 발행 : 2014.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

Adobe is one of the oldest construction materials that is still used in many seismic countries, and different construction techniques are found around the world. The adobe material is characterized as a brittle material; it has acceptable compression strength but it has poor performance under tensile and shear loading conditions. Numerical modelling is an alternative approach for studying the nonlinear behaviour of masonry structures such as adobe. The lack of a comprehensive experimental database on the adobe material properties motivated the study developed here. A set of a reference material parameters for the adobe were obtained from a calibration of numerical models based on a quasi-static cyclic in-plane test on full-scale adobe wall representative of the typical Peruvian adobe constructions. The numerical modelling, within the micro and macro modelling approach, lead to a good prediction of the in-plane seismic capacity and of the damage evolution in the adobe wall considered.

키워드

참고문헌

  1. Abaqus 6.9 SIMULIA (2009), Abaqus/CAE Extended Funcionality EF2, Manual. Dassault Systemss Corporation, Providence, RI, USA.
  2. Blondet, M., Torrealva, D., Villa-Garcia, G. and Ginocchio, F. (2005), Reforzamiento de construcciones de adobe con elementos producidos industrialmente: estudio preliminar (in Spanish), Report DAI 113.0225, Catholic University of Peru, Lima, Peru.
  3. Blondet, M. and Vargas, J. (1978), Investigacion Sobre Vivienda Rural (In Spanish), Report, Division of Civil Engineering, Catholic University of Peru, Lima, Peru.
  4. Calderini, C. and Lagomarsino, S. (2008), "Continuum model for in-plane anisotropic inelastic behaviour of masonry", ASCE J. Struct. Eng., 134, 209-220. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:2(209)
  5. Cruz, J.S., Barros, J. and Azevedo, A . (2004), Elasto-Plastic Multi-Fixed Smeared Crack Model for Concrete, Report 04-DEC/E-05, University of Minho, Minho, Portugal.
  6. Gambarotta, L. and Lagomarsino, S. (1997), "Damage models for the seismic response of brick masonry shear walls. Part II: The continuum model and its applications", Earthq. Eng. Struct. Dyn., 26(4), 441-462. https://doi.org/10.1002/(SICI)1096-9845(199704)26:4<441::AID-EQE651>3.0.CO;2-0
  7. Giordano, A., Mele, E. and De Luca, A. (2002), "Numerical modelling of masonry structures through different approaches", Ph.D. Thesis, University Federico II, Naples, Italy.
  8. Lagomarsino, S., Penna, A., Galasco, A. and Cattari, S. (2013), "TREMURI program: an equivalent frame model for the nonlinear seismic analysis of masonry buildings", Eng. Struct., 56, 1787-1799. https://doi.org/10.1016/j.engstruct.2013.08.002
  9. Lee, J. and Fenves, G.L. (1998), "Plastic-damage model for cyclic loading of concrete structures", J. Eng. Mech., 124(8), 892-900. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:8(892)
  10. Lotfi, H.R. and Shing, P.B. (1994), "Interface model applied to fracture of masonry structures", J. Struct. Eng., 120(1), 63-80. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:1(63)
  11. Lourenco, P.B. (1996), "Computational strategies for masonry structures", Ph.D. Thesis, Delft University, Delft, The Netherlands.
  12. Lowman, P.D. and Montgomery, B.C. (1998), Preliminary determination of epicenters of 358, 214 events between 1963 and 1998. .
  13. Lubliner, J., Oliver, J., Oller, S. and Onate, E. (1989), "A plastic-damage model for concrete", Int. J. Solids Struct., 25(3), 299-326. https://doi.org/10.1016/0020-7683(89)90050-4
  14. Magenes, G. and Della Fontana, A. (1998), "Simplified non-linear seismic analysis of masonry buildings", Proceedings of Fifth International Masonry Conference, British Masonry Society, London, England.
  15. Midas FEA v2.9.6. (2009), Nonlinear and Detail FE Analysis System for Civil Structures. Manual: Analysis and Algorithm. CSP FEA.
  16. Ngo, D. and Scordelis, A.C. (1967), "Finite element analysis of reinforced concrete beams", Am. Concrete Inst., 64(3), 152-163.
  17. Pela, L., Cervera, M. and Roca, P. (2013), "An orthotropic damage model for the analysis of masonry structures", Construct. Build. Mater., 41, 957-967. https://doi.org/10.1016/j.conbuildmat.2012.07.014
  18. Roca, P., Cervera, M., Gariup, G. and Pela, L. (2010), "Structural analysis of masonry historical constructions. classical and advanced approaches", Archives Comput. Meth. Eng., 17, 299-325. https://doi.org/10.1007/s11831-010-9046-1
  19. De Sensi, B. (2003), Terracruda, la diffusione dell'architettura di terra. www.terracruda.com/architetturadiffusione.htm, http://www.terracruda.com/architetturadiffusione.htm, .
  20. Stavridis, A. and Shing, P.B. (2010), "Finite element modeling of nonlinear behavior of masonry-infilled RC frames", J. Struct. Eng., ASCE, 136(3), 285-296. https://doi.org/10.1061/(ASCE)ST.1943-541X.116
  21. Tarque, N. (2011), "Numerical modelling of the seismic behaviour of adobe buildings", Ph.D. Thesis, ROSE School, Istituto di Studi Superiori di Pavia IUSS, Pavia, Italy.
  22. Tarque, N., Crowley, H., Pinho, R. and Varum, H. (2012), "Displacement-based fragility curves for seismic assessment of adobe buildings in cusco, Peru", Earthq. Spect., 28(2), 759-794. https://doi.org/10.1193/1.4000001
  23. Wawrzynek, A. and Cincio, A. (2005), "Plastic-damage macro-model for non-linear masonry structures subjected to cyclic or dynamic loads", Proceedings of Conference Analytical Models and New Concepts in Concrete and Masonry Structures, AMCM'2005, Gliwice, Poland.
  24. Webster, F. (2008), Earthen Structures: Assessing Seismic Damage, Performance, and Interventions.Chapter of In Terra Literature Review, An Overview of Research in Earthen Architecture Conservation. E. Avrami, H. Guillaud, and M. Hardy, eds., http://www.getty.edu/conservation/publications/pdf_publications/terra_lit_review.pdf, Los Angeles, California, USA, 69-79.

피인용 문헌

  1. Homogenization strategy for brick masonry walls under in-plane loading vol.163, 2018, https://doi.org/10.1016/j.conbuildmat.2017.12.133
  2. Micro-mechanical finite element modeling of diagonal compression test for historical stone masonry structure vol.112, 2017, https://doi.org/10.1016/j.ijsolstr.2017.02.014
  3. Seismic Analysis by Macroelements of Fujian Hakka Tulous, Chinese Circular Earth Constructions Listed in the UNESCO World Heritage List vol.14, pp.10, 2014, https://doi.org/10.1080/15583058.2019.1618973
  4. Cyclic Behaviour, Dynamic Analysis and Seismic Vulnerability of Historical Building Archetypes in Hungary vol.15, pp.7, 2021, https://doi.org/10.1080/15583058.2019.1690074