Computers and Concrete

  • 제13권6호
  • /
  • Pages.781-798
  • /
  • 2014
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Method for estimating workability of self-compacting concrete using mixing process images

  • Li, Shuyang (State Key Laboratory of Hydro Science and Engineering, Tsinghua University) ;
  • An, Xuehui (State Key Laboratory of Hydro Science and Engineering, Tsinghua University)
  • 투고 : 2013.02.26
  • 심사 : 2014.04.24
  • 발행 : 2014.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

Estimating the workability of self-compacting concrete (SCC) is very important both in laboratories and on construction site. A method using visual information during the mixing process was proposed in this paper to estimate the workability of SCC. First, fourteen specimens of concrete were produced by a single-shaft mixer. A digital camera was used to record all the mixing processes. Second, employing the digital image processing, the visual information from mixing process images was extracted. The concrete pushed by the rotating blades forms two boundaries in the images. The shape of the upper boundary and the vertical distance between the upper and lower boundaries were used as two visual features. Thirdly, slump flow test and V-funnel test were carried out to estimate the workability of each SCC. Finally, the vertical distance between the upper and lower boundaries andthe shape of the upper boundary were used as indicators to estimate the workability of SCC. The vertical distance between the upper and lower boundaries was related to the slump flow, the shape of the upper boundary was related to the V-funnel flow time. Based on these relationships, the workability of SCC could be estimated using the mixing process images. This estimating method was verified by three more experiments. The experimental results indicate that the proposed method could be used to automatically estimate SCC workability.

키워드

참고문헌

  1. Beaupre, D. (1994), "Rheology of High Performance Shotcrete", Ph. D. Dissertation, Universityof British Columbia, Vancouver.
  2. Beucher, S. (1992), "The watershed transformation applied to image segmentation", Scanning Microsc. Suppl., 6, 299-314.
  3. Cabaret, F., Bonnot, S., Fradett, L. and Tanguy, P.A.(2007), "Mixing time analysis using colorimetric methods and image processing", Ind. Eng. Chem. Res., 46(14), 5032-5042. https://doi.org/10.1021/ie0613265
  4. Carron, T. and Lambert, P. (1994), "Color edge detector using jointly hue, saturation and intensity", Proceedings of the IEEE International Conference on Image Processing, Austin, USA, November.
  5. Cazacliu, B. and Roquet, N. (2009), "Concrete mixing kinetics by means of power measurement", Cement Concrete Res., 39(3), 182-194. https://doi.org/10.1016/j.cemconres.2008.12.005
  6. Chopin, D., Cazacliu, B., de Larrard, F. and Schell, R. (2007), "Monitoring of concrete homogenisation with the power consumption curve", Mater. Struct., 40(9), 897-907. https://doi.org/10.1617/s11527-006-9187-8
  7. Daumann, B., Anlauf, H. and Nirschl, H. (2009), "Determination of the energy consumption during the production of various concrete recipes", Cement Concrete Res., 39(7), 590-599. https://doi.org/10.1016/j.cemconres.2009.04.001
  8. Daumann, B. and Nirschl, H. (2008), "Assessment of the mixing efficiency of solid mixtures by means of image analysis", Powder Technol., 182(3), 415-423. https://doi.org/10.1016/j.powtec.2007.07.006
  9. Ferraris, C.F., Brower, L., Ozyildirim, C. and Daczko, J. (2000), "Workability of self-compacting concrete", Proceedings of the PCI/FHWA/FIB International Symposium on High Performance Concrete, Orlando, USA, September.
  10. Fukunaga, K. (1972), Introduction to Statistical Pattern Recognition, Academic Press, New York, NY, USA.
  11. Gonzalez, R.C. and Woods, R.E. (2010), Digital Image Processing, Publishing House of Electronics Industry, Beijing, China.
  12. Haddon, J.F. and Boyce, J.F. (1990), "Image segmentation by unifying region and boundary information", IEEE Ttans. Pattern Anal. Mach. Intell., 12(10), 929-948. https://doi.org/10.1109/34.58867
  13. Hutchinson, T.C. and Chen, Z. (2006), "Improved image analysis for evaluating concrete damage", J. Comput. Civil Eng., 20(3), 210-216. https://doi.org/10.1061/(ASCE)0887-3801(2006)20:3(210)
  14. Khayat, K.H. (1999), "Workability, testing, and performance of self-consolidating concrete", ACI Mater. J., 96(3), 346-353.
  15. Lee, B.Y., Kim, Y.Y., Yi, S.T. and Kim, J.K. (2013), "Automated image processing technique for detecting and analysing concrete surface cracks", Struct. Infrastruct. Eng., 9(6), 567-577. https://doi.org/10.1080/15732479.2011.593891
  16. Marinoni, N., Pavese, A., Foi, M. and Trombinoa, L. (2005), "Characterisation of mortar morphology in thin sections by digital image processing", Cement Concrete Res., 35(8), 1613-1619. https://doi.org/10.1016/j.cemconres.2004.09.015
  17. Okamura, H. and Ouchi, M. (2003), "Self-Compacting Concrete", J. Adv. Concr. Technol., 1(1), 5-15. https://doi.org/10.3151/jact.1.5
  18. Otsu, N. (1979), "A threshold selection method from gray-level histograms", IEEE Trans. Syst. Man Cybern., SMC-9(1), 62-66.
  19. Ozawa, K., Maekawa, K. and Okamura, H. (1989), "Development of high performance concrete", Proceedings of JCI, 11(1), 699-704. (in Japanese)
  20. Ozawa, K., Sakata, N. and Okamura, H. (1995), "Evaluation of self-compact ability of fresh concrete using the funnel test", Concrete Library JSCE, 25, 59-75.
  21. Tang, X. (2009), "Application of 3D virtual-reality and image modeling rebuilt technology in construction management system", Bachelor Dissertation, Tsinghua University, Beijing. (in Chinese)

피인용 문헌

  1. A method for real-time moisture estimation based on self-compacting concrete workability detected during the mixing process vol.139, 2017, https://doi.org/10.1016/j.conbuildmat.2017.02.047
  2. Monitoring of concrete mixing evolution using image analysis vol.305, 2017, https://doi.org/10.1016/j.powtec.2016.10.008
  3. Self compacting reinforced concrete beams strengthened with natural fiber under cyclic loading vol.17, pp.5, 2016, https://doi.org/10.12989/cac.2016.17.5.597
  4. Deep Learning Approach for Estimating Workability of Self-Compacting Concrete from Mixing Image Sequences vol.2018, pp.1687-8442, 2018, https://doi.org/10.1155/2018/6387930
  5. Evaluating the settlement of lightweight coarse aggregate in self-compacting lightweight concrete vol.19, pp.2, 2014, https://doi.org/10.12989/cac.2017.19.2.203
  6. Effect of specimen geometry and specimen preparation on the concrete compressive strength test vol.62, pp.1, 2014, https://doi.org/10.12989/sem.2017.62.1.097
  7. “Guideline on Utilization of Placing the Concrete Having 12 cm of Slump in Site (by MLIT)” from a Point of View on “Recommendations Related to Fresh Concrete” Published by JSCE vol.56, pp.3, 2018, https://doi.org/10.3151/coj.56.3_213
  8. Estimating the workability of self-compacting concrete in different mixing conditions based on deep learning vol.25, pp.5, 2014, https://doi.org/10.12989/cac.2020.25.5.433