한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제23권3호
  • /
  • Pages.243-249
  • /
  • 2014
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지
DOI QR코드

DOI QR Code

다양한 열습환경하에서 최외각층 변화에 따른 CFRP 모자형 부재의 압궤특성

Collapse Characteristics of CFRP Hat Member with Outer Laminated Angle Changes under Hygrothermal Environment with Temperature Changes

  • Yang, Yongjun (Dep. of Fire Safety Management, College of Dongkang) ;
  • Hwang, Woochae (Dep. of Mechanical Design Engineering, University of Chosun) ;
  • Yang, Inyoung (Dep. of Mechanical Design Engineering, University of Chosun)
  • 투고 : 2013.07.17
  • 심사 : 2014.05.06
  • 발행 : 2014.06.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Currently, CFRP composites are rapidly replacing steel plates, as they are lighter, stronger, and more elastic; however, they are poorly suited to hygrothermal and impact-collapsed environments because moisture can alter their molecule arrangement and chemical properties. In this study, environments are experimentally simulated in order to investigate changes in the moisture absorption inside a CFRP composite and to determine its weakest point. Moreover, changes in the moisture absorption ratio at temperatures of $60^{\circ}C$ and $80^{\circ}C$ are studied and compared in order to understand how changes in temperature affect moisture absorption inside CFRP composites. Results show that moisture absorption leads to a strength reduction of around 50%. In addition, the moisture absorption rate inside CFRP composites is shown to change rapidly with increasing temperature. Accordingly, it showed that the change in matrix also has a weak point.

키워드

참고문헌

  1. Jcantwell, W. J., Morton, J., 1985, Detection of Impact Damage in CFRP Laminates, Composite Structures 3 241-257. https://doi.org/10.1016/0263-8223(85)90056-X
  2. Song, S. I., Bae, K. J., Lee, K. H., Park, G. G., 2002, Light Weight Design for Automotive Door Using Optimizations and Design of Experiments, Transactions of KSAE 10:1 125-132.
  3. Zheng, Q., Morgan, R. J., 1993, Synergistic Thermal-moisture Damage Mechanism of Epoxies and Their Carbon Fiber Composites, Journal of Composite Materials 27:15 1465-1479. https://doi.org/10.1177/002199839302701503
  4. Rief, C., Lindner, M., Kromp, K., 1990, Experimental Investigations and a Model Proposal on Damage Mechanisms in a Reinforced Carbon-Carbon Composite, ASTM STP 1059:9 564-579.
  5. Hwang, W. C., Sim, J. K., Yang, I. Y., 2011, A Study on the Collapse Characteristics of Al/CFRP Square Structural Member for Light Weight, Journal of the Korean Society of Manufacturing Technology Engineers 20:3 219-224.
  6. Choi, H. S., Ahn, K. J., Nam, J. D., 1998, Hygroscopic Behavior of Unidirectional Carbon Fiber/epoxy Composite Laminates, Transactions of the Korean Society of Mechanical Engineers A 22:8 1486-1500.
  7. Jung, J. A., Yang, I. Y., 1996, Impact Damages and Residual Strength of CFRP Laminates under the Hygrothermal Environment, Journal of the Korean Society of Mechanical Engineers A 20:12 3748-3758.
  8. Sala, G., 2000, Composite Degradation due to Fluid Absorption, Composites Part B 31:5 357-373. https://doi.org/10.1016/S1359-8368(00)00025-1
  9. Yuichiro, A., Ken, Y., Takashi, I., 2008, Effect of Hygrothermal Condition on Compression Sfter Impact Strength of CFRP Laminates, Composites Zcience and Technology 68:6 1376-1383. https://doi.org/10.1016/j.compscitech.2007.11.015
  10. Kim, Y. N., Choi, H. S., Cha, C. S., Im, K. H., Jung, J. A. Yang, I. Y., 2000, Influence of Stacking Sequence Conditions on the Characteristics of Impact Collapse using CFRP Thin-Wall Structures, Transactions of the Korean Society Mechanical Engineers A 24:12 2945-2951.
  11. Park, J. S., 1994, Impact damage and residual bending strength of CFRP composite laminate plates subjected to transverse impact loading under high temperatures Doctorate Thesis, Chosun University Republic of Korea.
  12. Shen, H., Springer, G. S., 1976, Effects of Moisture and Temperature on The Tensile Strength of Composite Materials, Journal of Composite Material 2 2-16.
  13. Tomblin, J., Seneviratne, W., Mckenna, J., Ng., Y., 2001, B-Basis Design Allowables for 2x2 Biaxially Braided RTM Composite Material Systems, National Institute for Aviation Research, Wichita State University.
  14. Farley, G. L., Jones, R. M., 1992, Crushing Characteristics of Continuous Fiber-Reinforced Composite Tubes, Journal of Composite Materials 26:1 37-50. https://doi.org/10.1177/002199839202600103
  15. Farley, G. L., Jones, R. M., 1992, Analogy of the Effect of Materials and Geometrical Variables on Energy-Absorption Capability of Composite Tubes, Journal of Composite Materials 26:1 78-89. https://doi.org/10.1177/002199839202600105