한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제23권3호
  • /
  • Pages.218-222
  • /
  • 2014
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지
DOI QR코드

DOI QR Code

3D 프린터를 이용한 마이크로 리액터 가공에 관한 연구

Fabrication of Micro-reactor by 3D Printing Machine

  • Choi, Hae Woon (Dept. of Mechanical and Automotive Engineering, Keimyung University) ;
  • Yoon, Sung Chul (Dept. of Mechanical and Automotive Engineering, Grad. School of Keimyung University) ;
  • Ma, Jae Kwon (Dept. of Mechanical and Automotive Engineering, Grad. School of Keimyung University) ;
  • Bang, Dae Wook (Dept. of Computer Sience, Keimyung University)
  • 투고 : 2014.03.19
  • 심사 : 2014.05.20
  • 발행 : 2014.06.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A 3D printer was used to fabricate a micro-TAS system for biomedical applications. A polymeric medical device fabrication based on a 3D printer can be performed at atmospheric conditions. A CAD- and CAM-based system is a flexible method to design medical components, and a 3D printer is a suitable device to perform this task. In this research, a 100-micron-wide fluidic channel was fabricated with a high-aspect ratio. A cross-sectional SEM image confirmed its possible usage in a micro-reactor using 3D printers. CNC-machined samples were compared to 3D printer-fabricated samples, and the advantages and disadvantages were discussed. Based on the SEM images, the surface roughness of the 3D printed reactor was not affected by wet or dry conditions due to its manufacturing principle. An aspect ratio of 5 to 1 was achievable with 100-${\mu}$ m-wide fluid channels. No melting was found, and the shape of channels was straight enough to be used for micro reactors.

키워드

참고문헌

  1. Farson, D., Choi, H., Zimmerman, B., Steach, J., Chalmers, J., Olesik, S., Lee, L. 2008, Femtosecond laser micromachining of dielectric materials for biomedical applications, J. Micromech. Microeng. 18 035020-035028. https://doi.org/10.1088/0960-1317/18/3/035020
  2. Shin, H., Lee, Y., Choi, H., 2012, Multi-layer Glass Cutting by Femtosecond Laser, J. of KSMTE 21:3 382-386. https://doi.org/10.7735/ksmte.2012.21.3.382
  3. Choi, S. D., Cheong, S. H., Kwon, H. G., Jun, J. M., Choi, M. S., Yang, S. C., 2007, Design of hybrid cutting system for flat glass by laser beam, Proc. KSMTE 838-843.
  4. Ben-Yakar, A., Harkin, A., Ashmore, J., Byer, R., Stone, H. 2007, Thermal and fluid processes of a thin melt zone during femtosecond laser ablation of glass:the formation of rims by single laser pulses, J. Appl. Phys. D 40 1447-1459. https://doi.org/10.1088/0022-3727/40/5/021
  5. Shin, H., Choi H., Kim, S., 2010, Hybrid process for lubricant groove on linear guides, Int. J. Adv. Manuf. Technol. 46 1001-1008. https://doi.org/10.1007/s00170-009-2169-6
  6. Choi, H., Lee, S., Farson, D., Lu, C., Lee, L., 2009, Femtosecond lase micromachining and application of hot embossing molds for microfluid device fabrication, Journal of Laser Apps. 21:4 196-204. https://doi.org/10.2351/1.3263118
  7. Watt, P., Wiles, C., 2007, Recent advances in synthetic micro reaction technology, Chem. Comm. 5 443-467.
  8. Kim, S., Choi, H., 2010, A study of influence of cutting oils on surface profiles for micro-channels, Proc. of KSME spring meeting 302-304.

피인용 문헌

  1. 3-Dimensional Printing for Mesh Types of Short Arm Cast by Using Computed Tomography vol.15, pp.1, 2015, https://doi.org/10.5392/JKCA.2015.15.01.308
  2. A Study on Joining of 3D Thermoset and Biodegradable Polymers vol.32, pp.4, 2014, https://doi.org/10.5781/JWJ.2014.32.4.20
  3. Effects of Friction Coefficient and Mesh Change on Cutting Force and Chip Shape in Cutting Simulation vol.28, pp.3, 2019, https://doi.org/10.7735/ksmte.2019.28.3.148
  4. Three-dimensional Continuous Laser Scanning Method for Three-dimensional Microcell Chip Application vol.29, pp.5, 2014, https://doi.org/10.7735/ksmte.2020.29.5.370