산업경영시스템학회지 (Journal of Korean Society of Industrial and Systems Engineering)

  • 제37권1호
  • /
  • Pages.157-164
  • /
  • 2014
  • /
  • 2005-0461(pISSN)
  • /
  • 2287-7975(eISSN)
한국산업경영시스템학회 (Society of Korea Industrial and System Engineering)
권호 표지
DOI QR코드

DOI QR Code

등가 물성 평가를 이용한 골판지의 물성치

The Mechanical Properties of Corrugated Cardboard using Equivalent Evaluation

  • 권경영 (창원대학교 산업시스템공학과) ;
  • 정종윤 (창원대학교 산업시스템공학과)
  • Kwon, Kyung Young (Dept. of Industrial and Systems Engineering, Changwon National University) ;
  • Jung, Jong-Yun (Dept. of Industrial and Systems Engineering, Changwon National University)
  • 투고 : 2014.02.28
  • 심사 : 2014.03.15
  • 발행 : 2014.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The usage of corrugated cardboard for packing material is increasing in these days because it is light and easy to manufacture packing boxes. However, the structure analysis of packing boxes, made of cardboard, is not well carried. The reason can be deduced that its mechanical properties for structure analysis are not well known. The cardboards are made different shapes with various types of raw materials that are paper-based compound. In addition, the cardboards are considered to be orthotropic material. This research finds mechanical properties of triple layered cardboard which is composed of outer liner and inner liner. The moduli of elasticity and of shear for liners are found from tension test and T-Peel test. The mechanical properties of the cardboard are calculated using the super position method and equivalent evaluation method.

키워드

참고문헌

  1. Aboura, Z., Talbi, N., and Allaoui, S., Benzeggagh; ML, Elastic behavior of corrugated cardboard : experiments and modeling. Composite Structures, 2011, Vol. 63, p 53-62.
  2. Cho, J.R., Song, J.I., and Choi, J.H., Prediction of effective mechanical properties of reinforced braid by 3-D finite element analysis. Key Engineering Materials, 2006, Vol. 306-308, p 799-804. https://doi.org/10.4028/www.scientific.net/KEM.306-308.799
  3. Haj-Ali, R., Choi, J., Wei, B.S., Popil, R., and Schaepe, M., Refined nonlinear finite element models for corrugated fiberboards. Composite Structures, 2011, Vol. 87, p 321-333.
  4. Han, J.W., The study of problems of packing industry and improvement plan, [master's thesis]. [Seoul, Korea] : Hanyang University, 2008.
  5. Jung, J.Y., Cui, H., Moon, D.H., and Lee, C.M., Parameter selection for the milling of thin wall. Journal of Society of Korea Industrial and Systems Engineering, 2007, Vol. 30, p 52-60.
  6. Kwon, K.Y., The measurement of properties and the stress-analysis for corrugated cardboard [master's thesis]. [Changwon, Korea] : Changwon National University, 2012.
  7. Kwon, K.Y. and Jung, J.Y., The measurement of properties for corrugated cardboard, [Proceedings of spring conference of Society of Korea Industrial and Systems Engineering]. [Changwon, Korea] : Changwon National University, 2012.
  8. Song, J.I. and Cho, J.R., Derivation of effective material properties of reinforced braid layer using detailed 3-D finite element method. J of Korea Mechanical Engineering Society, 2004, Vol. 28, p 249-257.

피인용 문헌

  1. Numerical Prediction of Equivalent Mechanical Properties of Corrugated Paperboard by 3D Finite Element Analysis vol.10, pp.22, 2014, https://doi.org/10.3390/app10227973