참고문헌
- Gabr MH, Elrahman MA, Okubo K, Fujii T. Effect of microfibrillated cellulose on mechanical properties of plain-woven CFRP reinforced epoxy. Compos Struct, 92, 1999 (2010). http://dx.doi.org/10.1016/j.compstruct.2009.12.009.
- Bagheri R, Pearson RA. Role of particle cavitation in rubbertoughened epoxies: II. Inter-particle distance. Polymer, 41, 269 (2000). http://dx.doi.org/10.1016/S0032-3861(99)00126-3.
- Kawaguchi T, Pearson RA. The effect of particle-matrix adhesion on the mechanical behavior of glass filled epoxies. Part 2. A study on fracture toughness. Polymer, 44, 4239 (2003). http://dx.doi.org/10.1016/S0032-3861(03)00372-0.
- Mahfuz H, Adnan A, Rangari VK, Jeelani S, Jang BZ. Carbon nanoparticles/whiskers reinforced composites and their tensile response. Composites A, 35, 519 (2004). http://dx.doi.org/10.1016/j.compositesa.2004.02.002.
- Evora VMF, Shukla A. Fabrication, characterization, and dynamic behavior of polyester/TiO2 nanocomposites. Mater Sci Eng A, 361, 358 (2003). http://dx.doi.org/10.1016/S0921-5093(03)00536-7.
- Rodgers RM, Mahfuz H, Rangari VK, Chisholm N, Jeelani S. Infusion of SiC nanoparticles into SC-15 epoxy: an investigation of thermal and mechanical response. Macromol Mater Eng, 290, 423 (2005). http://dx.doi.org/10.1002/mame.200400202.
- Pervin F, Zhou Y, Rangari VK, Jeelani S. Testing and evaluation on the thermal and mechanical properties of carbon nano fiber reinforced SC-15 epoxy. Mater Sci Eng A, 405, 246 (2005). http://dx.doi.org/10.1016/j.msea.2005.06.012
- Liao YH, Marietta-Tondin O, Liang Z, Zhang C, Wang B. Investigation of the dispersion process of SWNTs/SC-15 epoxy resin nanocomposites. Mater Sci Eng A, 385, 175 (2004). http://dx.doi.org/10.1016/j.msea.2004.06.031.
- Ma PC, Kim JK, Tang BZ. Effects of silane functionalization on the properties of carbon nanotube/epoxy nanocomposites. Composites Sci Technol, 67, 2965 (2007). http://dx.doi.org/10.1016/j.compscitech.2007.05.006.
- Lanticse LJ, Tanabe Y, Matsui K, Kaburagi Y, Suda K, Hoteida M, Endo M, Yasuda E. Shear-induced preferential alignment of carbon nanotubes resulted in anisotropic electrical conductivity of polymer composites. Carbon, 44, 3078 (2006). http://dx.doi.org/10.1016/j.carbon.2006.05.008.
- Chen Q, Dai L, Gao M, Huang S, Mau A. Plasma activation of carbon nanotubes for chemical modification. J Phys Chem B, 105, 618 (2000). http://dx.doi.org/10.1021/jp003385g.
- Breuer O, Sundararaj U. Big returns from small fibers: a review of polymer/carbon nanotube composites. Polym Compos, 25, 630 (2004). http://dx.doi.org/10.1002/pc.20058.
- Coleman JN, Khan U, Blau WJ, Gun'ko YK. Small but strong: a review of the mechanical properties of carbon nanotube-polymer composites. Carbon, 44, 1624 (2006). http://dx.doi.org/10.1016/j.carbon.2006.02.038.
- Baughman RH, Zakhidov AA, de Heer WA. Carbon nanotubes--the route toward applications. Science, 297, 787 (2002). http://dx.doi.org/10.1126/science.1060928.
- Xie XL, Mai YW, Zhou XP. Dispersion and alignment of carbon nanotubes in polymer matrix: a review. Mater Sci Eng R, 49, 89 (2005). http://dx.doi.org/10.1016/j.mser.2005.04.002.
- Sun YP, Fu K, Lin Y, Huang W. Functionalized carbon nanotubes: properties and applications. Acc Chem Res, 35, 1096 (2002). http://dx.doi.org/10.1021/ar010160v.
- Kim JA, Seong DG, Kang TJ, Youn JR. Effects of surface modification on rheological and mechanical properties of CNT/epoxy composites. Carbon, 44, 1898 (2006). http://dx.doi.org/10.1016/j.carbon.2006.02.026.
- Gojny FH, Schulte K. Functionalisation effect on the thermomechanical behaviour of multi-wall carbon nanotube/epoxy-composites. Composites Sci Technol, 64, 2303 (2004). http://dx.doi.org/10.1016/j.compscitech.2004.01.024.
- Zhu J, Peng H, Rodriguez-Macias F, Margrave JL, Khabashesku VN, Imam AM, Lozano K, Barrera EV. Reinforcing epoxy polymer composites through covalent integration of functionalized nanotubes. Adv Funct Mater, 14, 643 (2004). http://dx.doi.org/10.1002/adfm.200305162.
- Hsiao KT, Gillespie JJW, Fink BK, Mathur R, Advani SG. A closed form solution for flow during the vacuum assisted resin transfer molding process. J Manuf Sci Eng, 122, 463 (1999). http://dx.doi.org/10.1115/1.1285907.
- Hsiao KT, Devillard M, Advani SG. Simulation based flow distribution network optimization for vacuum assisted resin transfer moulding process. Modell Simul Mater Sci Eng, 12, S175 (2004). http://dx.doi.org/10.1088/0965-0393/12/3/S08.
- Oh JH, Lee DG. Cure cycle for thick glass/epoxy composite laminates. J Compos Mater, 36, 19 (2002). http://dx.doi.org/10.1177/0021998302036001300.
- Zhou Y, Pervin F, Lewis L, Jeelani S. Experimental study on the thermal and mechanical properties of multi-walled carbon nanotube-reinforced epoxy. Mater Sci Eng A, 452-453, 657 (2007). http://dx.doi.org/10.1016/j.msea.2006.11.066.
- Thostenson ET, Li C, Chou TW. Nanocomposites in context. Composites Sci Technol, 65, 491 (2005). http://dx.doi.org/10.1016/j.compscitech.2004.11.003.
- Thostenson ET, Chou TW. Aligned multi-walled carbon nanotubereinforced composites: processing and mechanical characterization. J Phys D, 35, L77 (2002). http://dx.doi.org/10.1088/0022-3727/35/16/103.
- Basara C, Yilmazer U, Bayram G. Synthesis and characterization of epoxy based nanocomposites. J Appl Polym Sci, 98, 1081 (2005). http://dx.doi.org/10.1002/app.22242.
- Chen ZK, Yang JP, Ni QQ, Fu SY, Huang YG. Reinforcement of epoxy resins with multi-walled carbon nanotubes for enhancing cryogenic mechanical properties. Polymer, 50, 4753 (2009). http://dx.doi.org/10.1016/j.polymer.2009.08.001.
- Nieu NH, Tan TTM, Huong NL. Epoxy-phenol-cardanol-formaldehyde systems: thermogravimetry analysis and their carbon fiber composites. J Appl Polym Sci, 61, 2259 (1996). http://dx.doi.org/10.1002/(SICI)1097-4628(19960926)61:13<2259::AIDAPP3>3.0.CO;2-B.
- Saito S, Sasabe H, Nakajima T, Yada K. Dielectric relaxation and electrical conduction of polymers as a function of pressure and temperature. J Polym Sci A-2, 6, 1297 (1968). http://dx.doi.org/10.1002/pol.1968.160060708.
피인용 문헌
- Influence of MWCNTs on Fracture Toughness of MWCNTs/Nickel-Pitch Fiber/Epoxy Composites vol.28, pp.6, 2015, https://doi.org/10.7234/composres.2015.28.6.361
- Mechanical Property and Thermal Stability of Epoxy Composites Containing Poly(ether sulfone) vol.39, pp.3, 2015, https://doi.org/10.7317/pk.2015.39.3.426
- Mechanical and Thermal Properties of Epoxy Composites Reinforced Fluorinated Illite and Carbon Nanotube vol.27, pp.3, 2016, https://doi.org/10.14478/ace.2016.1033
- High-performance bismaleimide resins with low cure temperature for resin transfer molding process vol.29, pp.3, 2017, https://doi.org/10.1177/0954008316642278
- Thermal and Flame Retardancy Behavior of Oil Palm Based Epoxy Nanocomposites pp.1572-8900, 2017, https://doi.org/10.1007/s10924-017-1087-1
- Prediction of mechanical properties of MWCNT-reinforced composites using the RVE model vol.32, pp.18, 2018, https://doi.org/10.1142/S0217984918501968
- Interfacial mechanical properties of carbon nanotube-deposited carbon fiber epoxy matrix hierarchical composites vol.25, pp.8, 2018, https://doi.org/10.1080/09276440.2018.1439620
- Assessing the Critical Multifunctionality Threshold for Optimal Electrical, Thermal, and Nanomechanical Properties of Carbon Nanotubes/Epoxy Nanocomposites for Aerospace Applications vol.6, pp.1, 2019, https://doi.org/10.3390/aerospace6010007