참고문헌
- K. Woellert, P. Ehrenfreund, A. J. Ricco, H. Hertzfeld, "Cubesats: Cost-effective Science and Technology Platforms for Emerging and Developing Nations", Advances in Space Research, Vol. 47, No. 4, 2011, pp.663-684. https://doi.org/10.1016/j.asr.2010.10.009
- J. M. E. Plaza, J. A. V. Vilan, F. A. Agelet, J. B. Mancheno, M. L. Estevez, C. M. Fernandez, F. S. Ares, "Xatcobeo: Small Mechanisms for Cubesat Satellites - Antenna and Solar Array Deployment", The 40th Aerospace Mechanisms Symposium, 2010, pp.415-430.
- http://www.pw-sat.pl
- A. Thurn, S. Huynh, S. Koss, P. Oppenheimer, S. Butcher, J. Schlater, P. Hagan, "A Nichrome Burn Wire Release Mechanism for Cubesats", The 41st Aerospace Mechanisms Symposium, 2012, pp.479-488.
- C. Apland, D. Persons, D. Weir, and M. Marley, "A Novel Release Mechanism Employing the Principle of Differential Coefficients of Thermal Expansion" The 41st Aerospace Mechanisms Symposium, 2012, pp.465-478.
- H. U. Oh, M. J. Lee, "Performance Verification of Separation Nut Type Non-explosive Separation Device for Cube Satellite Application", Journal of the Korean Society for Aeronautical and Space Sciences, Vol. 41, No. 10, 2013, pp.827-832. https://doi.org/10.5139/JKSAS.2013.41.10.827
- S. H. Woo, J. H. Han, "Mid Frequency Shock Response Determination by Using Energy Flow Method and Time Domain Correction", Shock and Vibration, Vol. 20, No. 5, 2013, pp.847-862. https://doi.org/10.1155/2013/701863
- http://www.tiniaerospace.com
- http://www.gomspace.com
- K. Nakaya, K. Konoue, H. Sawada, K. Ui, H. Okada, N. Miyashita, M. Iai, T. Urabe, N. Yamaguchi, M. Kashiwa, K. Omagari, I. Morita, S. Matunaga, "Tokyo Tech Cubesat: CUTE-I Design & Development of Flight Model and Future Plan", AIAA 21st International Communications Satellite Systems Conference and Exhibit, 2003, AIAA 2003-2388.
- H. U. Oh, S. C. Kwon, "Structural Design of Cube Satellite by Using Heating Wire Cutting Type Separation Mechanism", Journal of the Korean Society for Aeronautical and Space Sciences, Vol. 41, No. 9, 2013, pp.720-725. https://doi.org/10.5139/JKSAS.2013.41.9.720
피인용 문헌
- Performance and Thermal Design Validation for FM STEP Cube Lab. vol.43, pp.9, 2015, https://doi.org/10.5139/JKSAS.2015.43.9.814
- A Series of Process of Electrical Integration and Function Test for Flight Model of STEP Cube Lab. vol.44, pp.9, 2016, https://doi.org/10.5139/JKSAS.2016.44.9.814
- Launch and On-orbit Environment Verification Test of Flight Model of Hinge Driving Type Holding and Release Mechanism based on the Burn Wire Release vol.44, pp.3, 2016, https://doi.org/10.5139/JKSAS.2016.44.3.274