DOI QR코드

DOI QR Code

The microstructure and mechanical performance of high strength alloy steel X2M

  • Manigandan, K. (Department of Mechanical Engineering, The University of Akron) ;
  • Srivatsan, T.S. (Department of Mechanical Engineering, The University of Akron) ;
  • Freborg, A.M. (Department of Geology, The University of Akron) ;
  • Quick, T. (Deformation Control Technology, Inc.) ;
  • Sastry, S. (Department of Mechanical Engineering, The University of Akron)
  • 투고 : 2013.11.05
  • 심사 : 2014.04.04
  • 발행 : 2014.03.25

초록

In this paper, the microstructure, hardness, tensile deformation and fracture behavior of high strength alloy steel X2M is presented anddiscussed. The influence of both composition and processing on microstructure of the as-provided material and resultant influence of microstructure, as a function of orientation, on hardness, tensile properties and final fracture behavior is highlighted. The macroscopic mode and intrinsic microscopic features that result from fracture of the steel specimens machined from the two orientations, longitudinal and transverse is discussed. The intrinsic microscopic mechanisms governing quasi-static deformation and final fracture behavior of this high strength steel are outlined in light of the effects oftest specimen orientation, intrinsic microstructural effects and nature of loading.

키워드

참고문헌

  1. Askeland, D.R. and Phulke, P.P. (2008), The Science and Engineering of Materials, Fifth Edition, Thompson Publishers, USA, 2005, 520-530.
  2. Averbach, B.L., Bingzhe Lou, Pearson, P.K. Fairchild, R.E. and Bamberger, E.N. (1985), "Fatigue crack propagation in carburized high alloy bearing steels", Metall. Transact., 16A, 1253-1259.
  3. Averbach, B.L. Bingzhe Lou, Pearson, P.K., Fairchild, R.E. and Bamberger, E.N. (1985), "Fatigue crack propagation in carburized X-2M steel", Metall. Transac., 16A, 1267-1272.
  4. Bajer, A.J., Laura, E.J. and Wei, R.P. (1965), Structure and Properties of Ultrahigh Strength Steels, ASTM STP 370, ASTM, Philadelphia, PA, 3-13.
  5. Bucher, J.H., Powell, G.W. and Sputnik, J.W. (1966), Application of Fracture Toughness Parameters to Structural Metals, edited by Herman Greenberg, Gordon and Breach, New York,. USA.
  6. Cunningham, R.J. (1974), Boeing-Vertol Division of Boeing Company "Steel (X2M) Transmission Gear Material Evaluation, Test Results and Final Report, U.S. Government Contract No. DAAJ01 70-C-0840.
  7. Cunningham, R.J. (1975), "Process for Carburizing High Alloy Steels", U.S. Patent Number 3,885,995.
  8. Danzeisen, J., Merklein, M. and Roll, K. (2008), "Investigation of fracture behavior of TRIP steels", Int. J. Mater. Form. Supplement, 1, 221-224 https://doi.org/10.1007/s12289-008-0364-x
  9. Dieter, G.E. (2006), Mechanical Metallurgy, Third Edition, McGraw Hill Publishers, 400-410.
  10. Kanvinde, A.M. and Deierlein, G.G. (2007), "Cyclic void growth model to assess ductile fracture initiation in structural steels during low cycle fatigue", J. Eng. Mech., 701-712.
  11. Pascover, J.S. and Malas, S.J. (1965), Structure and Properties of Ultra-High Strength Steels, ASTM STP 370, ASTM, Philadelphia, USA, 370-389.
  12. Thomas, G., Schmatz, D. and Gerberich, W.W. (1965), in High Strength Materials (Edited by V.F. Zackay), John Wiley and Sons, New York, USA, 199-219.
  13. Townsend, D.P., and Zaretsky, E.V. (1980), Report NASA-TP-1731 (N81-14322), Lewis Research Center,Cleveland, Ohio.
  14. Tvergaard, V. (2008), "Shear deformation of voids modeled by internal pressure", Int. J. Mech. Sci., 50, 1459-1465. https://doi.org/10.1016/j.ijmecsci.2008.08.007
  15. Tvergaard, V. and Hutchinson, J.W. (2002), "Material failure by void growth to coalescence", Int. J. Solids Struct., 39(13-14), 3581-3597. https://doi.org/10.1016/S0020-7683(02)00168-3
  16. Van Slycken, J., Verleysen, P. and Degrieck, J. (2006), "High Strain rate behavior of low alloy multiphase aluminum- and silicon-based transformation-induced plasticity steels", Metall. Mater. Transact., 37A, 1537-1539.
  17. Van Slycken, J., Verleysen, P. and Degrieck, J. (2007), "Dynamic response of aluminum-containing TRIP steel and its constituent phases", Mater. Sic. Eng., A460-461, 516-524. https://doi.org/10.1016/j.msea.2007.01.075