References
- Sung Yong Shim and Su Gun Lim, Journal of The Korean society for heat treatment, "Age Hardening and Mechanical Property of Extruded Al-Zn-Mg-(Cu) Al Alloys with Sc addition", 20(5) (2007) 243-249
- Tae-hun Kim, Sung-Yong Shim, Hyung-Won Park and Su- Gun Lim, J.KFS, "Optimum Fabrication Conditions and Reheating Characteristic of Semi-Solid Al-Zn-Mg-(Sc) Alloy by Inclined Cooling Plate", 29(5) (2009) 213-219
- Hyung-Won Park, Dae-hwan Kim, Sung-Yong Shim, Hee- Kyung Kim, Bong-Hak Seong, Chang-Ock Choi and Su-Gun Lim, J.KFS, "The Effect of Ca Addition on the Grain Growth Inhibition During Reheating Process of Al-Zn-Mg Al Alloys for Thixo-extrusion", 31(6) (2011) 347-353 https://doi.org/10.7777/jkfs.2011.31.6.347
- D.O. Sprowls and R.H. Brown, Stress Corrosion Mechanisms for Aluminum Alloys, in Proc. of Conf. Fundamental Aspects of Stress Corrosion Cracking, Ohio State University, NACE International (1969) 466.
- G.M. Ugiansky, L.P. Skolnick and S.W. Stiefel. "Directional Effects in the Stress Corrosion Cracking of an Aluminum Alloy", Corrosion, 25 (1969) 77-86. https://doi.org/10.5006/0010-9312-25.2.77
- A.J. Sedriks, J.A.S. Green and D.L. Novak, Met. Trans., "The influence of heat treatment on the stress-corrosion susceptibility of a ternary Al-5.3 Pct Zn-2.5 Pct Mg alloy", 4(8) (1973) 1992-1994. https://doi.org/10.1007/BF02665430
- C.R. Shastry, M. Levy and A. Jeshi, Corrosion Science, "The effect of solution treatment temperature on stress corrosion susceptibility of 7075 aluminium alloy", 25(9) (1981) 673- 688.
- A.W. Thompson and I.M. Bernstein, Fourth International Conference on Fracture, MCIC /B103816, 2 (1978) 249-254.
- A.W. Thompson and I.M. Bernstein, Advancesin Corrosion Science and Technology, "The Role of Metallurgical Variables in Hydrogen-Assisted Environmental Fracture", 7 (1980) 53- 175.
- J. Albrecht, A.W. Thompson and I.M. Bemstein, Metall. Trans. A, "The Role of Microstructure in Hydrogen-Assisted Fracture of 7075 Aluminum", 10A (1979) 1759-1766.
- D.A. Hardwick, A.W. Thompson and I.M. Bernstein, Metall. Trans. A, "Microstructural effects on hydrogen embrittlement in a high purity 7075 aluminum alloy", 14A (1983) 2517- 2526.
- D.A. Hardwick, M. Taheri, A.W. Thompson and I.M. Bemstein, Metall. Trans. A, "Hydrogen Embrittlement in a 2000-Series Aluminum Alloy", 13A (1982) 235-239.
- Hideki HAGI, JSME International Journal, "Hydrogen Embrittlement of Mild Steel Charged Cathodically with Hydrogen_Effect of Dissolved Hydrogen and Hydrogen Damage on Elongation of Mild Steel", 39(2) (1996) 246-251. https://doi.org/10.1299/jsmeb.39.246
- Kaori Miyata and Masaaki Igarashi, Metall. Tran. A, "Effect of Ordering on Susceptibility to Hydrogen Embrittlement of a Ni-Base Superalloy", 23A (1992) 953-961.
- Symons D.M., Metall. and Mat. Trans., "Hydrogen Embrittlement of Ni-Cr-Fe Alloys", 28A (1997) 655-663
- Don Gil Kwon, Hak Min Kim, Sung Hak Lee and young Won Chang, J. of the Korean Inst. of Met. & Mater., "Microscopic Mechanism of the Hydrogen Damage Effect on Softening Behavior", 30(10) (1992) 1248-1257.
- Hiroshi Suzuki, Daisuke Kobayashi, Nobuko Hanada, Kenichi Takai and Yukito Hagihara, Materials Transactions, "Existing State of Hydrogen in Electrochemically Charged Commercial-Purity Aluminum and Its Effects on Tensile Properties", 52(9) (2011) 1741-1747 https://doi.org/10.2320/matertrans.M2011035
- Hagiwara and N. N. Oguchi, Corrosion-National Association of Corrosion Engineers Annual Conference, Nace International, (1997) Paper No. 200
- T. Zhang, W.Y. Chu, K.W. Gao and L.J. Qiao, Mater. Sci. Eng. A, "Study of correlation between hydrogen-induced stress and hydrogen embrittlement", 347 (2003) 291-299. https://doi.org/10.1016/S0921-5093(02)00600-7
- P. Andrews, M. McQueen and N. Millwood, Corrosion, "Variation of the Fracture Toughness of a High-Strength Pipeline Steel Under Cathodic Protection", 57(8) (2001) 721- 729. https://doi.org/10.5006/1.3290400