References
- Cho, G.C. and Lee, I.M. (2002), "Soil Properties in relation to Elastic Wave", Journal of Korean Geotechnical Engineering, Vol. 18, No.6, pp.83-101.
- Cresswell, A., Barton, M.E., and Brown, R. (1999), "Determining the maximum density of sands by pluviation", ASTM geotechnical testing journal, Vol.22, No.4, pp.324-328. https://doi.org/10.1520/GTJ11245J
- Duncan, J.M. and Chang, C.-Y. (1970), "Nonlinear analysis of stress and strain in soils", Journal of the Soil Mechanics and Foundations Division, Vol.96, No. SM5, pp.1629-1653.
- Dyvik, R. and Madshus, C. (1985), "Lab Measurements of Gmax Using Bender Elements", Advances in the art of testing soils under cyclic conditions: ASCE, pp.186-196.
- Fernandez, A.L. (2000), "Tomographic imaging the state of stress", PhD thesis Civil Engineering, Georgia Institute of Technology, Atlanta. pp.298.
- Frost, J. and Park, J.-Y. (2003), "A critical assessment of the moist tamping technique", ASTM geotechnical testing journal, Vol.26, No.1, pp.57-70.
- Head, K.H. and Epps, R. (1986), Manual of soil laboratory testing, Pentech Press London, pp.
- Juneja, A. and Raghunandan, M. (2010), "Effect of Sample Preparation on Strength of Sands", Indian Geotechnical Conference, Mumbai, India, pp.327-330.
- Kumar, J. and Madhusudhan, B. (2010), "Effect of relative density and confining pressure on Poisson ratio from bender and extender elements tests", Geotechnique, Vol.60, No.7, pp.561-567. https://doi.org/10.1680/geot.9.T.003
- Ladd, C. and Foott, R. (1974), "New design procedure for stability of soft clays", Journal of the Geotechnical Engineering Division, Vol.100, No.7, pp.763-786.
- Ladd, R. (1978), "Preparing test specimens using undercompaction", ASTM geotechnical testing journal, Vol.1, No.1. pp.16-23.
- Lee, J.-S. and Santamarina, J.C. (2005), "Bender elements: performance and signal interpretation", Journal of Geotechnical and Geoenvironmental Engineering, Vol.131, No.9, pp.1063-1070. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:9(1063)
- Raghunandan, M., Juneja, A., and Hsiung, B. (2012), "Preparation of reconstituted sand samples in the laboratory", International Journal of Geotechnical Engineering, Vol.6, No.1, pp.125-131. https://doi.org/10.3328/IJGE.2012.06.01.125-131
- Sharma, R.M., Baxter, C.D., Moran, K., Vaziri, H., and Narayanasamy, R. (2011), "Strength of weakly cemented sands from drained multistage triaxial tests", Journal of Geotechnical and Geoenvironmental Engineering, Vol.137, No.12, pp.1202-1210. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000537
- Richart, F.E., Hall, J.R., and Woods, R.D. (1970), "Vibrations of soils and foundations", Prentice-Hall, Englewood Cliffs, New Jersey, pp.414.
- Roesler, S.K. (1979), "Anisotropic shear modulus due to stress anisotropy", Journal of the Geotechnical Engineering Division, Vol. 105, No.7, pp.871-880.
- Salem, H. (2000), "Poisson's ratio and the porosity of surface soils and shallow sediments, determined from seismic compressional and shear wave velocities", Geotechnique, Vol.50, No.4, pp.461-463. https://doi.org/10.1680/geot.2000.50.4.461
- Viggiani, G. and Atkinson, J. (1995), "Interpretation of bender element tests", International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts: Elsevier, 32, pp.373A-373A.
- Yoshimi, Y., Tokimatsu, J., and Ohara, A. (1994), "In situ liquefaction resistance of clean sands over a wide density range", Geotechnique, Vol.44, No.3, pp.479-494. https://doi.org/10.1680/geot.1994.44.3.479