DOI QR코드

DOI QR Code

모형실험과 시뮬레이션을 통한 활어 이송용 예인 가두리의 수직 및 수평 전개력 추정

Estimation of vertical and horizontal spreading force of the towing cage for transporting the live fish by model test and simulation

  • 박수봉 (부경대학교 수산물리학과) ;
  • 이춘우 (부경대학교 해양생산시스템관리학부)
  • Park, Subong (Department of Fisheries Physics, Pukyong National University) ;
  • Lee, Chun Woo (Division of Marine Production System Management, Pukyong National University)
  • 투고 : 2014.04.07
  • 심사 : 2014.05.22
  • 발행 : 2014.05.31

초록

Nowadays, consumption of fisheries products is increasing. There are several factors, one of which is a quantitative development through aquaculture. Another factor is an increase qualitative consumption of fish which require that fish be supplied alive. This requires a lot of technical effort to transport the live fish that have low survival rate (c.f. tuna and mackerel) in coastal waters and in the open sea. To develop a towing cage for transporting the live fish, model test in a circulate water channel and simulation by computer tool were carried out. In order to spread vertically, floats were attached at the upper part of the cage, and iron chains attached at the lower part of the cage. For horizontal spreading, kites were attached on the cage. The tension and spreading performance of the cage were measured. The result shows that the tension and reduction ratio of inside volume of the cage were tended to increase with increased towing speeds. The suitable operation condition in towing cage was 1.0 m/s towing speeds with vertical spreading force 8.7 kN, horizontal spreading force 5.6 kN; in this case the reduction ratio of inside volume of the cage was estimated as 25%.

키워드

참고문헌

  1. Cha BJ. 2003. Numerical simulation on the dynamic characteristics of the trawl system. Ph.D. Thesis, Pukyong National University, Korea. pp.90
  2. FAO. 2012. The state of world fisheries and aquaculture, 3-100.
  3. Goudey CA. 2009. Practical aspects of offshore aquaculture system design. www.was.org/ documents/MeetingPresentations/AA2009/AA2009_0825.pdf. Presentation at the World Aquaculture Society, Aquaculture America 2009.
  4. Hosseini SA, Lee CW, Kim HS, Lee JH and Lee GH. 2011. The sinking performance of the tuna purse seine gear with largemeshed panels using numerical method. Fish Sci 77, 503-520. (DOI: http://dx.doi.org/10.1007/s12562-011-0371-6)
  5. Kim HY, Lee CW, Shin GK, Kim HS, Cha BJ and Lee GH. 2007. Dynamic simulation of the behavior of purse seine gear and sea-trial verification. Fish Res 88 (1-3), 109-119. (DOI: http://dx.doi.org/10.1016/j.fishres.2007.08.007)
  6. Kreiberg H, Solmie A. 1987. A production-scale towable netpen for efficient high-volume transport of pacific herring: Design and comparative performance. Aquacult Eng 6, 289-299. (DOI: http://dx.doi.org/10.1016/0144-8609 (87)90024-0)
  7. Lee CW, Kim YB, Lee GH, ChoeMY, LeeMK and Koo KY. 2008. Dynamic simulation of a fish cage system subjected to currents and waves. Ocean Eng 35, 1521-1532. (DOI: http://dx.doi.org/10.1016/j.oceaneng.2008.06.009)
  8. Lee JH, Lee CW and Cha BJ. 2005. Dynamic simulation of tuna longline gear using numerical methods. Fish Sci 71, 1287-1294. (DOI: http://dx.doi.org/10.1111/j.1444-2906.2005.01095.x)
  9. Malcolm B. 2008. Cage aquaculture 3rd edition. John and Sons. Fishing news books, Oxford ox2 oel, England, 149-164.
  10. NFRDI. 2012. Development of blue fin tuna transport system, 8-21.
  11. Rottiers, Donald V. 1991. Towable cage for studies of smoltification in Atlantic salmon. The Progressive Fish-Culturist 53 (2), 124-127. (DOI: http://dx.doi.org/10.1577/1548-8640 (1991)053<0124:TCFSOS>2.3.CO;2)

피인용 문헌

  1. Resistance and stability evaluation of mobile fish-cage vol.52, pp.2, 2016, https://doi.org/10.3796/KSFT.2016.52.2.079