References
- Hervas-Garcia A, Martinez-Lozano MA, Fos-Galve P, et al. : Composite resins. A review of the materials and clinical indications. Med Oral Patol Oral Cir Bucal, 11:215-220, 2006.
- Vandewalle KS, Roberts HW, Tiba A, Charlton DG : Thermal emission and curing efficiency of LED and halogen curing lights. Oper Dent, 30:257-264, 2005.
- Uhl A, Michaelis C, Mills RW, Jandt KD : The influence of storage and indenter load on the Knoop hardness of dental composites polymerized with LED and halogen technologies. Dent Mater, 20:21-28, 2004. https://doi.org/10.1016/S0109-5641(03)00054-X
- Mills RW, Uhl A, Blackwell GB, Jandt KD : High power light emitting diode (LED) arrays versus halogen light polymerization of oral biomaterials: Barcol hardness, compressive strength and radiometric properties. Biomaterials, 23:2955-2963, 2002. https://doi.org/10.1016/S0142-9612(02)00024-8
- Stahl F, Ashworth SH, Jandt KD, Mills RW : Lightemitting diode (LED) polymerisation of dental composites: flexural properties and polymerisation potential. Biomaterials, 21:1379-1385, 2000. https://doi.org/10.1016/S0142-9612(00)00029-6
- Felix CA, Price RB, Andreou P : Effect of reduced exposure times on the microhardness of 10 resin composites cured by high-power LED and QTH curing lights. J Can Dent Assoc, 72:147, 2006.
- Torno V, Soares P, Vieira S, et al. : Effects of irradiance, wavelength, and thermal emission of different light curing units on the Knoop and Vickers hardness of a composite resin. J Biomed Mater Res, 85:166-171, 2008.
- Kurachi C, Tuboy AM, Magalhães DV, Bagnato VS : Hardness evaluation of a dental composite polymerized with experimental LED-based devices. Dent Mater, 17:309-315, 2001. https://doi.org/10.1016/S0109-5641(00)00088-9
- Yoon TH, Lee YK, Lim BS, Kim CW : Degree of polymerization of resin composites by different light sources. J Oral Rehabil, 29:1165-1173, 2002. https://doi.org/10.1046/j.1365-2842.2002.00970.x
- Hinoura K, Akiyama Y, Onose H, et al. : Influence of irradiation sequence on dentin bond of resin inlays. Oper Dent, 20:30-33, 1995.
- Ferracane JL, Mitchem JC, Condon JR, Todd R : Wear and marginal breakdown of composites with various degrees of cure. J Dent Res, 76:1508-1516, 1997. https://doi.org/10.1177/00220345970760081401
- David JR, Gomes OM, Reis A, et al. : Effect of exposure time on curing efficiency of polymerizing units equipped with light-emitting diodes. J Oral Sci, 49:19-24, 2007. https://doi.org/10.2334/josnusd.49.19
- Uhl A, Mills RW, Jandt KD : Photoinitiator dependent composite depth of cure and Knoop hardness with halogen and LED light curing units. Biomaterials, 24:1787-1795, 2003. https://doi.org/10.1016/S0142-9612(02)00532-X
- Ceballos L, Fuentes MV, Rodriguez J, et al. : Curing effectiveness of resin composites at different exposure times using LED and halogen units. Med Oral Patol Oral Cir Bucal, 14:E51-56, 2009.
- Rueggeberg FA, Caughman WF, Curtis JW Jr. : Effect of light intensity and exposure duration on cure of resin composite. Oper Dent, 19:26-32, 1994.
- Rueggeberg FA, Craig RG. : Correlation of parameters used to estimate monomer conversion in a lightcured composite. J Dent Res, 67:932-937, 1988. https://doi.org/10.1177/00220345880670060801
- Price RB, Felix CA, Andreou P : Knoop hardness of ten resin composites irradiated with high-power LED and quartz-tungsten-halogen lights. Biomaterials, 26:2631-2641, 2005. https://doi.org/10.1016/j.biomaterials.2004.06.050
- Nomoto R : Effect of light wavelength on polymerization of light-cured resins. Dent Mater J, 16:60-73, 1997. https://doi.org/10.4012/dmj.16.60
- Uhl A, Siqusch BW, Jandt KD : Second generation LEDs for the polymerization of oral biomaterials. Dent Mater, 20:80-87, 2004. https://doi.org/10.1016/S0109-5641(03)00095-2
Cited by
- Comparison of the bonding strengths of second- and third-generation light-emitting diode light-curing units vol.46, pp.6, 2016, https://doi.org/10.4041/kjod.2016.46.6.364