한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제13권1호
  • /
  • Pages.85-91
  • /
  • 2014
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

5MW 풍력용 피치드라이브의 유성기어 Micro-geometry 최적화에 관한 연구

A Study on Tooth Micro-geometry Optimization of Planetary Gear for 5MW Wind Turbine Pitch Drive

  • 이인범 (경상대학교 기계항공학부) ;
  • 김동영 (경상대학교 기계항공학부) ;
  • 허철수 (경상대학교 기계항공학부) ;
  • 이도영 (경상대학교 기계항공학부) ;
  • 류성기 (경상대학교 기계항공학부)
  • Lee, In-Bum (Department of Mechanical & Aerospace Engineering, Gyeongsang National University) ;
  • Kim, Dong-Young (Department of Mechanical & Aerospace Engineering, Gyeongsang National University) ;
  • Xu, Zhe-Zhu (Department of Mechanical & Aerospace Engineering, Gyeongsang National University) ;
  • Lee, Do-Young (Department of Mechanical & Aerospace Engineering, Gyeongsang National University) ;
  • Lyu, Sung-Ki (Department of Mechanical & Aerospace Engineering, Gyeongsang National University (ReCAPT))
  • 투고 : 2014.02.03
  • 심사 : 2014.02.18
  • 발행 : 2014.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The rotation of a spindle unit must be accurate for high-quality machining and to improve the quality of the machine tools. Therefore, the proper measurement of the rotation accuracy and ensuring a proper analysis are very important. Separate processes are necessary because spindle errors and roundness errors associated with the test balls can both factor into the measured rotation error values. We used three methods to discern test ball errors and analyzed which could be deemed as the most proper technique in a test of the rotation accuracy of the main spindle of a machine tool.

키워드

참고문헌

  1. Houser, D. R., Gear Noise Sources and Their Prediction Using Mathematical Model, Gear Design, pp. 213-222, 1990.
  2. Mark, W. D., Analysis of the vibratory excitation of gear systems, II: tooth error representations, approximations, and application, The Journal of the Acoustical Society of America, Vol. 66, Issue 6, pp. 1758-1787, 1979. https://doi.org/10.1121/1.383649
  3. Munro, R. G., Yildirim, N., hall, D. M., Optimum Profile Relief and Transmission Error in Spur Gears, Proceedings of Institution of Mechanical Engineers, Vol. 404, No. 13, pp. 35-42, 1990.
  4. S.H. Oh, S.W. Oh, J.H. Kang, I.B. Lee, S.K. Lyu, A Study on Modeling and Optimization of Tooth Micro-geometry for a Helical Gear Pair, IJPEM, Vol. 14, No. 3, pp. 423-427, 2013.
  5. S.W Oh, Q. Zhang, I.B. Lee, S.K Lyu, Tooth Modification for Spur Gear for Articulated Hauler's Final Drive, Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 5, pp. 42-47, 2012.
  6. Smith, J. D., Gears and Their Vibration, Marcel Dekker Inc., 1983.
  7. Houser, D. R. and Singh, R., Gear Noise Basic Short Course, Gearlab-The Ohio State University, pp. 2-42, 2003.
  8. Houser, D. R. and Harianto, J. H., The Effect of Micro-Geometry and Load on Helical Gear Noise Excitations, SAE 2005 Noise and Vibration Conference and Exhibition, No. 2005-01-2295, pp. 1-12, 2005.

피인용 문헌

  1. 중형 풍력발전기 피치 드라이브의 유성기어 경량화에 관한 연구 vol.21, pp.1, 2014, https://doi.org/10.9726/kspse.2017.21.1.005
  2. 트랙터 최종구동축용 복합유성기어 방식 감속기의 Micro-geometry를 이용한 전달 오차 및 치면 하중 분포 개선에 관한 연구 vol.17, pp.1, 2014, https://doi.org/10.7839/ksfc.2020.17.1.001