Smart Structures and Systems

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Damage assessment of a bridge based on mode shapes estimated by responses of passing vehicles

  • Received : 2012.07.01
  • Accepted : 2013.08.22
  • Published : 2014.05.25
⟨ Previous Next ⟩

Abstract

In this study, an indirect approach is developed for assessing the state of a bridge on the basis of mode shapes estimated by the responses of passing vehicles. Two types of damages, i.e., immobilization of a support and decrease in beam stiffness at the center, are evaluated with varying degrees of road roughness and measurement noise. The assessment theory's feasibility is verified through numerical simulations of interactive vibration between a two-dimensional beam and passing vehicles modeled simply as sprung mass. It is determined that the damage state can be recognized by the estimated mode shapes when the beam incurs severe damage, such as immobilization of rotational support, and the responses contain no noise. However, the developed theory has low robustness against noise. Therefore, numerous measurements are needed for damage identification when the measurement is contaminated with noise.

Keywords

Acknowledgement

Supported by : Japan Society for the Promotion of Science (JSPS)

References

  1. Bu, J.Q., Law, S.S. and Zhu, X.Q. (2006), "Innovative bridge condition assessment from dynamic response of a passing vehicle", J. Eng. Mech. - ASCE, 132(12), 1372-1379. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:12(1372)
  2. Doebling, S.W., Farrar, C.R., Prime, M.B. and Shevitz, D.W. (1996), Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review, Research Report No. LA-13070-MS, ESA-EA, Los Alamos National Laboratory, NM.
  3. Gangone, M.V., Whelan, M.J. and Janoyan, K.D. (2012), "Deployment of a dense hybrid wireless sensing systemfor bridge assessment", Struct. Infrastruct. E., 7(5), 369-378.
  4. Gonzalez, A., Obrien, E.J. and McGetrick, P.J. (2012), "Identification of damping in a bridge using a moving instrumented vehicle", J. Sound Vib., 331(18), 4115-4131. https://doi.org/10.1016/j.jsv.2012.04.019
  5. Ihsan, S.I., Ahmadian, M., Faris, W.F. and Blancard, E.D. (2009), "Ride performance analysis of half-car model for semi-active system using RMS as performance criteria", Shock Vib., 16(6), 593-605. https://doi.org/10.1155/2009/607871
  6. Kawamoto, M., Matuoka, K. and Oya, M. (1997), "Blind separation of sources using temporal correlation of the observed signals", IEICE Trans. Fundamentals, E80-A(4), 695-704.
  7. Kawatani, M., Kobayashi, Y. and Takamori, K. (1997), "Nonstationary random analysis with coupling vibration of bending and torsion of simple girder bridge under moving vehicles", J. Struct. Earthq. Eng.- JSCE, 570/I-40, 231-238.
  8. Kim, C.W. and Kawatani, M. (2008), "Pseudo-static approach for damage identification based on coupling vibration with a moving vehicle", Struct. Infrastruct. E., 4(5), 371-379. https://doi.org/10.1080/15732470701270082
  9. Lin, C.W. and Yang, Y.B. (2005), "Use of a passing vehicle to scan the fundamental bridge frequencies: an experimental verification", Eng. Struct., 27(13), 1865-1878. https://doi.org/10.1016/j.engstruct.2005.06.016
  10. McGetrick, P.J., Gonzalez, A. and Obrien, E.J. (2009), "Theoretical investigation of the use of a moving vehicle to identify bridge dynamic parameters", Insgiht, 51(8), 433-436. https://doi.org/10.1784/insi.2009.51.8.433
  11. Nguyen, K.V. and Tran, H.T. (2010), "Multi-cracks detection of a beam-like structure based on the onvehicle vibration signal and wavelet analysis", J. Sound Vib., 329(21), 4455-4465. https://doi.org/10.1016/j.jsv.2010.05.005
  12. Okabayashi, T. (1979), "Mean square response analysis of highway bridges under a single moving vehicle", Proceedings of the Japan Society of Civil Engineers.
  13. Pyzara, A., Bylina, B. and Bylina, J. (2011), "The influence of a matrix condition number on iterative methods' convergence", Proceedings of the Federated Conference on Computer Science and Information Systems.
  14. Ratcliffe, C.P. (1997), "Damage detection using a modified Laplacian operator on mode shape data", J. Sound Vib., 204(3), 505-517. https://doi.org/10.1006/jsvi.1997.0961
  15. Salawu, O.S. and Willams, C. (1995), "Review of full-scale dynamic testing of bridge structures", Eng. Struct., 17(2), 113-121. https://doi.org/10.1016/0141-0296(95)92642-L
  16. Salawu, O.S. (1997), "Detection of structural damage through changes in frequency: a review", Eng. Struct., 19(9), 718-723. https://doi.org/10.1016/S0141-0296(96)00149-6
  17. Siringoringo, D.M. and Fujino, Y. (2012), "Estimating bridge fundamental frequency from vibration response of instrumented passing vehicle: analytical and experimental study", Adv. Struct. Eng., 15(3), 443-459.
  18. Yang, Y.B., Lin, C.W. and Yau, J.D. (2004), "Extracting bridge frequency from the dynamic response of a passing vehicle", J. Sound Vib., 272(3-5), 471-493. https://doi.org/10.1016/S0022-460X(03)00378-X
  19. Yang, Y.B. and Lin, C.W. (2005), "Vehicle-bridge interaction dynamics and potential applications", J. Sound Vib., 284(1-2), 205-226. https://doi.org/10.1016/j.jsv.2004.06.032
  20. Yang, Y.B. and Chang, K.C. (2009a), "Extraction of bridge frequencies from the dynamic response of a passing vehicle enhanced by EMD technique", J. Sound Vib., 322(4-5), 18-19.
  21. Yang, Y.B. and Chang, K.C. (2009b), "Extracting the bridge frequencies indirectly from a passing vehicle: parametric study", Eng. Struct., 31(10), 2448-2459. https://doi.org/10.1016/j.engstruct.2009.06.001
  22. Yin, S.H. and Tang, C.Y. (2011), "Identifying cable tension loss and deck damage in a cable-stayed bridge using moving vehicle", J. Vib. Acoust., 133(2),021007. https://doi.org/10.1115/1.4002128
  23. Yong, X., Hong, H., James, M.W.B. and Xia, P.Q. (2002), "Damage identification of structures with uncertain frequency and mode shape data", Earthq. Eng. Struct. D., 31(5), 1053-1066 https://doi.org/10.1002/eqe.137
  24. Zang, Y., Wang, L. and Xiang, Z. (2012), "Damage detection by mode shape squares extracted from a passing vehicle", J. Sound Vib., 331(2), 291-307. https://doi.org/10.1016/j.jsv.2011.09.004
  25. Zhang, Y., Lie, S.T. and Xiang, Z. (2013), "Damage detection method based on operating deflection shape curvature extracted from dynamic response of a passing vehicle", Mech. Syst. Signal Pr., 35(1-2), 238-254. https://doi.org/10.1016/j.ymssp.2012.10.002

Cited by

  1. Application of empirical mode decomposition to drive-by bridge damage detection vol.61, 2017, https://doi.org/10.1016/j.euromechsol.2016.09.009
  2. Track-monitoring from the dynamic response of an operational train vol.87, 2017, https://doi.org/10.1016/j.ymssp.2016.06.041
  3. A Review of Indirect Bridge Monitoring Using Passing Vehicles vol.2015, 2015, https://doi.org/10.1155/2015/286139
  4. Identification of structural dynamic characteristics based on machine vision technology 2018, https://doi.org/10.1016/j.measurement.2017.09.043
  5. Extraction of Bridge Frequencies from a Moving Test Vehicle by Stochastic Subspace Identification vol.21, pp.3, 2016, https://doi.org/10.1061/(ASCE)BE.1943-5592.0000792
  6. A mode shape-based damage detection approach using laser measurement from a vehicle crossing a simply supported bridge vol.23, pp.10, 2016, https://doi.org/10.1002/stc.1841
  7. Structural Health Monitoring Based on Vehicle-Bridge Interaction: Accomplishments and Challenges vol.18, pp.12, 2015, https://doi.org/10.1260/1369-4332.18.12.1999
  8. On the use of a passing vehicle for the estimation of bridge mode shapes vol.397, 2017, https://doi.org/10.1016/j.jsv.2017.02.051
  9. Implementation of a drive-by monitoring system for transport infrastructure utilising smartphone technology and GNSS vol.7, pp.2, 2017, https://doi.org/10.1007/s13349-017-0218-7
  10. A discussion on the merits and limitations of using drive-by monitoring to detect localised damage in a bridge vol.90, 2017, https://doi.org/10.1016/j.ymssp.2016.12.012
  11. Wave Number-Based Technique for Detecting Slope Discontinuity in Simple Beams Using Moving Test Vehicle vol.17, pp.06, 2017, https://doi.org/10.1142/S0219455417500602
  12. State-of-the-Art Review on Modal Identification and Damage Detection of Bridges by Moving Test Vehicles vol.18, pp.02, 2018, https://doi.org/10.1142/S0219455418500256
  13. Mass-normalized mode shape identification method for bridge structures using parking vehicle-induced frequency change vol.25, pp.6, 2018, https://doi.org/10.1002/stc.2174
  14. Damage localization of beam structures using mode shape extracted from moving vehicle response vol.121, pp.None, 2014, https://doi.org/10.1016/j.measurement.2018.02.066
  15. Bridge Surface Roughness Identification Based on Vehicle-Bridge Interaction vol.19, pp.7, 2014, https://doi.org/10.1142/s021945541950069x
  16. Extraction of Bridge Modal Parameters Using Passing Vehicle Response vol.24, pp.9, 2014, https://doi.org/10.1061/(asce)be.1943-5592.0001477
  17. A Machine Learning Approach to Bridge-Damage Detection Using Responses Measured on a Passing Vehicle vol.19, pp.18, 2014, https://doi.org/10.3390/s19184035
  18. Detection of Damaged Supports Under Railway Track Using Dynamic Response of a Passing Vehicle vol.19, pp.10, 2019, https://doi.org/10.1142/s0219455419501177
  19. The Use of Mode Shape Estimated from a Passing Vehicle for Structural Damage Localization and Quantification vol.19, pp.10, 2019, https://doi.org/10.1142/s0219455419501244
  20. State-of-the-Art of Vehicle-Based Methods for Detecting Various Properties of Highway Bridges and Railway Tracks vol.20, pp.13, 2020, https://doi.org/10.1142/s0219455420410047
  21. Hilbert transform based approach to improve extraction of "drive-by" bridge frequency vol.25, pp.3, 2014, https://doi.org/10.12989/sss.2020.25.3.265
  22. Vehicle-Assisted Techniques for Health Monitoring of Bridges vol.20, pp.12, 2020, https://doi.org/10.3390/s20123460
  23. Extraction of bridge information based on the double-pass double-vehicle technique vol.25, pp.6, 2014, https://doi.org/10.12989/sss.2020.25.6.679
  24. Towards smart cities: crowdsensing-based monitoring of transportation infrastructure using in-traffic vehicles vol.10, pp.4, 2014, https://doi.org/10.1007/s13349-020-00411-6
  25. Residual Mode Vector-Based Structural Damage Identification with First-Order Modal Information vol.2021, pp.None, 2014, https://doi.org/10.1155/2021/5526171
  26. Experimental Study on the Relationship between the Natural Frequency and the Corrosion in Reinforced Concrete Beams vol.2021, pp.None, 2014, https://doi.org/10.1155/2021/9976738
  27. Review on the new development of vibration-based damage identification for civil engineering structures: 2010–2019 vol.491, pp.None, 2014, https://doi.org/10.1016/j.jsv.2020.115741
  28. An acceleration-based approach for crack localisation in beams subjected to moving oscillators vol.27, pp.5, 2014, https://doi.org/10.1177/1077546320929821
  29. Drive-by methodology to identify resonant bridges using track irregularity measured by high-speed trains vol.158, pp.None, 2014, https://doi.org/10.1016/j.ymssp.2021.107667
  30. A Drive-By Frequency Identification Method for Simply Supported Railway Bridges Using Dynamic Responses of Passing Two-Axle Vehicles vol.26, pp.11, 2014, https://doi.org/10.1061/(asce)be.1943-5592.0001782
  31. Extracting mode shapes from drive-by measurements to detect global and local damage in bridges vol.17, pp.11, 2014, https://doi.org/10.1080/15732479.2020.1817105
  32. Detecting Hinge Joint Damage in Hollow Slab Bridges Using Mode Shapes Extracted from Vehicle Response vol.36, pp.1, 2014, https://doi.org/10.1061/(asce)cf.1943-5509.0001694
  33. Fundamental mode shape estimation and element stiffness evaluation of girder bridges by using passing tractor-trailers vol.169, pp.None, 2014, https://doi.org/10.1016/j.ymssp.2021.108746