Journal of the Korean Wood Science and Technology

The Korean Society of Wood Science & Technology (한국목재공학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Modulus of Elasticity of Wood Exposed to Accelerated Weathering Test by Measuring Ultrasonic Transmission Time

촉진 열화 목재의 초음파 전달 시간 측정을 통한 탄성 계수의 평가

  • Park, Chun-Young (Department of Housing Environmental design, Chonbuk National University) ;
  • Kim, Gwang-Chul (Department of Housing Environmental design, Chonbuk National University)
  • 박천영 (전북대학교 주거환경학과) ;
  • 김광철 (전북대학교 주거환경학과)
  • Received : 2013.08.12
  • Accepted : 2014.02.27
  • Published : 2014.05.25
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, accelerated weathering test was performed with wood, a major material for wooden cultural building. In order to evaluate the deterioration of wood, ultrasonic transmission times were measured to evaluate dynamic modulus of elasticity (MOE), which was verified by determining static MOE using three-point bending test. Ultrasonic transmission time was decreased with an increase in the weathering time levels (0, 500, 1000 hours) while it increased in 1500 and 2000 hours. Distribution of dynamic and static MOE was similar to that of the ultrasonic transmission time measurements. The results mean that the measurement of ultrasonic transmission time was very effective to evaluate MOE of wooden cultural buildings for their preservation and management. This method could be utilized to assess wooden cultural buildings as a way of preserving them in a scientific manner.

본 연구에서는 전통 목조 건축물의 주재료인 목재를 인공 촉진 열화 시킨 후 초음파 전달 속도 측정을 통하여 탄성계수를 측정하였다. 촉진 열화 시간은 0시간에서 500, 1000, 1500, 2000시간이며, 자외선 조사와 주기적인 인공 강우를 통해 열화를 진행시켰다. 초음파 전달 속도 측정을 통하여 동적 탄성 계수를 평가하고 이를 3점 휨 시험을 통하여 측정한 정적 탄성계수와 비교분석하였다. 초음파 전달 속도, 정적 탄성계수, 동적 탄성계수는 열화 시간이 증가함에 따라 동일한 경향을 나타내었는데, 열화 1000시간까지는 탄성계수가 감소하다가 1500시간 이후 다시 회복되는 경향을 보였다. 이러한 결과는 비파괴 검사법을 통하여 전통 목조 건축물의 구조 부재의 열화 평가는 물론 구조 안전성 평가의 기초 자료로 활용될 수 있음을 알려준다.

Keywords

References

  1. Feist, W.C., Mraz, E.A. 1978. Comparison of outdoor and accelerated weathering of unprotected softwoods. Forest Products Journal 28(3): 38-43.
  2. Jang, S.S. 2000. Effects of moisture content and slope of grain on ultrasonic transmission speed of wood. Mokchae Konghak 28(2) : 10-18.
  3. Jung, H., Ahn, B.-M., Lee, D.-M., Shin, P.-S., Park, S.-Y. 2002. Reliability evaluation and standardization of outdoor exposure materials. The Korean Reliability Society Proceeding (July): 147-155.
  4. Kalnins, M.A., Feist, W.C. 1993. Increase in wettability of wood with weathering. Forest Products Journal 43(2): 55-57.
  5. Kang, H.-Y., Park, S.-J., Kim, Y.-S. 2002. Moisture sorption and ultrasonic velocity of artificially weathered sitka spruce. Mokchae Konghak 30(1): 18-24.
  6. Kang, H.-Y., Kim, S.-W., Park, S.-J. 2003. Weathering of prunus sargentii specimens modified with acetic anhydride and formaldehyde vapor. Mokchae Konghak 31(5): 57-64.
  7. Lee, M.-J., Lee, D.-H., Kim, G.-H. 2003. Evaluation of weathering durability of waterborne preservative treated wood by accelerated weathering. Mokchae Konghak 31(4): 44-49.
  8. Park, J.-C., Hong, S.-I. 2008. Determination of localized defects in wood by the transfer time of ultrasonic waves. Mokchae Konghak 36(1) : 60-68. https://doi.org/10.5658/WOOD.2008.36.1.061
  9. Shim, K.-B., Lee, D.-S., Park, B.-S., Cho, S.-T., Kim, K.-M., Yeo, H.-M. 2006. Differences of physical, mechanical and chemical properties of Korean red pine(Pinus densiflora) between old and bew wood. Journal of Korea forestry energy 25(2) : 1-8.
  10. Shim, K.-B., Park, J.-H., Kim, K.-M. 2006. Grading of domestic softwood 2*6 structural lumber by non-destructive test. Journal of Korea forestry energy 25(2) : 49-54.
  11. Son, D.W., Lee, S.-M., Lee, D.-H., Kang, E.-C., Park, B.S.. 2008. The evaluation of the preservative treated plywood produced by factory processing. Mokchae Konghak 36(3): 47-54. https://doi.org/10.5658/WOOD.2008.36.3.047

Cited by

  1. Effect of Short-Term Weathering on Flame Retardant Performance of Korean Red Pine Wood Coated with Dancheong vol.44, pp.5, 2016, https://doi.org/10.5658/WOOD.2016.44.5.785
  2. Evaluation of Influences of Artificial Defect of Wood Deck Using Non-destructive Ultrasonic Testing vol.44, pp.1, 2016, https://doi.org/10.5658/WOOD.2016.44.1.1