Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Drilling Characteristics for Implant Procedure Drill

임플란트 시술용 드릴의 가공 성능 평가에 관한 연구

  • Lee, Sang-Min (Dept. of Engineering Science & Mechanics, Kumoh Institute of Technology) ;
  • Chae, Seung-Su (Dept. of Engineering Science & Mechanics, Kumoh Institute of Technology) ;
  • Lee, Jae-Kun (DSM Co., Ltd.) ;
  • Choi, Hwan (Dept. of Engineering Science & Mechanics, Kumoh Institute of Technology) ;
  • Lee, Jong-Chan (Dept. of Engineering Science & Mechanics, Kumoh Institute of Technology)
  • Received : 2013.12.23
  • Accepted : 2014.03.11
  • Published : 2014.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

Skull Melted 3.2YSZ has good physical properties and does not undergo low temperature degradation. Due to these excellent physical and mechanical properties, Skull Melted 3.2YSZ has been studied for use in dental implants. In this study, a ø2.2mm Initial Twist Drill was made using Skull Melted 3.2YSZ; the drilling characteristics were compared with those of the traditional SUS420J drill. The experimental results indicate that the Skull Melted 3.2YSZ drill requires similar thrust forces and has a slightly higher temperature.

Keywords

References

  1. B. Stzer, "The gene-experssion and phenotypic response of hFOB 1.19 osteoblasts to surface-modified titanium and zirconia", Journal of Bilmaterials, Vol 30, pp979-990, 2009. https://doi.org/10.1016/j.biomaterials.2008.10.054
  2. Lim, H. H., Lee, K. M., Koh, Y. I. and Park, S. W., "Allergic contact stomatitis caused by a titanium nitride-coated implant abutment", The Journal of Prosthetic Dentistry, Vol 108, pp209-213, 2012. https://doi.org/10.1016/S0022-3913(12)60163-2
  3. Smith, E., Methta, A. J. and Stahtam, B. N., "Metal sensitivity to Elektra prostheses-two cases froom a metal on metal implant for hand joint replacement", The Journal of Contact Dermatitis", Vol 60, pp298. 2009.
  4. Lee, J. H., Heo, Y. W., Kim, J. J., Lee, J. K., Lee, H. S. and Lee. J. H., " The aging effect on the low temperature mechanical strength of 3.2YSZ single crystals manufactured by the Skull melting method"Journal of the American Ceramic Society, Vol.39, pp2031-2036, 2013
  5. Lee, S. M., Chae, S. S., Lee, C. S., Kim, T. S., Lee, J. C. and Lee. J. K., "A Study on the Characteristics of Skull Melted Zirconia", Proceedings of the KSMPE Conference, PP.117-118, 2010.
  6. Yu, J. H., Jung, S. M., Choi, B, H. and Ju, S. D., "The effect of guided flapless implant procedure on heat generation from implant drilling", The Journal of the Korean academy of prosthodontic society, Vol 51, pp11-19. 2013. https://doi.org/10.4047/jkap.2013.51.1.11