참고문헌
- Haberstroh, E., Michaeli, W., Henze, E., 2002, Simulation of the Filling and Curing Phase in Injection Molding of Liquid Silicone Rubber (LSR), J. Reinf. Plast. Comp. 21 461-470. https://doi.org/10.1177/0731684402021005476
- Tarinee, N., Polchit, B., 2006, The Effect of Curing Parameters on the Mechanical Properties of Styrene-NR Elastomers Containing Natural Rubber-Graft-Polystyrene, J. Kasetsart. 40 7-16.
- Rahul, J., Simranpreet, S. G., 2012, Optimization of Vulcanization Process in Windshield Weather Rubber Strip Application, Int. J. Adv. Eng. Tech. 3 67-71.
- Rey, T., Chagnon, G., Cam, J.-B., Favier, D., 2013, Influence of the temperature on the mechanical behaviour of filled and unfilled silicone rubbers, Poly. Test.. 32 492-501. https://doi.org/10.1016/j.polymertesting.2013.01.008
- Yuanxiang, Z., Jianyi, W., Haihang, C., Qiong, N., Qinghua, S., Yunshan, W., 2009, The Influence of Pre-stressing on Breakdown Characteristics in Liquid Silicone Rubber J. Electro. 67 422-425. https://doi.org/10.1016/j.elstat.2009.01.029
- Menges, G., Michaeli, W., Mohren, P. 2000, How to Make Injection Molds, HANSER, USA
- Rubber Fabrication Solutions, 2001, Injection Moulding of SILASTIC Liquid Silicone Rubber, Dow Corning Corporation.
- Lee, S., Kang, J. J., Lee, J., Hong, S. Ko, J. S., Lee, J., Noh, J., 2012, Silicone Injection Mold & Molding Technology for Super-hydrophobic Curved Surface J. Kor. Soc. Prec. Eng. 29 13-18. https://doi.org/10.7736/KSPE.2012.29.1.013
- Song, M., Kim, H., Kang, J., Kim, K., 2011, Finite Element Analysis of Residual Stress Evolution during Cure Process of Silicone Resin for High-power LED Encapsulant, J. Kor. Soc. Prec. Eng. 28 219-225.
피인용 문헌
- Correlation between Mold Deformation and Shrinkage of Product Based on Packing Conditions during Injection Molding vol.29, pp.6, 2014, https://doi.org/10.7735/ksmte.2020.29.6.466