한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제23권2호
  • /
  • Pages.186-193
  • /
  • 2014
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지
DOI QR코드

DOI QR Code

캔드타입 전동워터펌프용 수중베어링의 특성분석

Characteristic Analysis of Underwater Bearing for Canned-Type Electric Water Pump

  • Park, In Kyum (Dept. of Mechanical and Mechatronics Engineering, Kangwon National University) ;
  • Kim, Hyung Jin (Dept. of Mechanical and Mechatronics Engineering, Kangwon National University) ;
  • Hong, Nam Pyo (Kangwon human Resources Development Institude) ;
  • Seo, Young Ho (Dept. of Mechanical and Mechatronics Engineering, Kangwon National University) ;
  • Kim, Byeong Hee (Dept. of Mechanical and Mechatronics Engineering, Kangwon National University)
  • 투고 : 2013.11.19
  • 심사 : 2014.03.26
  • 발행 : 2014.04.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents characteristic analysis of underwater bearing for canned type electric water pump. Characteristic analysis of underwater bearing was performed using self-developed performance tester, which capable of torque change, noise change, motor speed change and abrasion loss test with respect to temperature change of underwater bearing. The performance tester can be monitored in real time by designing the control unit using the Labview program. The performance experiment was performed through comparison of the silicon carbide (SIC) and the carbon bearing. From the experiment results, performance of SIC bearing was better than carbon bearing at the abrasion and temperature experiment.

키워드

참고문헌

  1. Ko, K. H., 2010, A Study on Reduction of Fuel Consumption by Displaying Fuel Injection Data for Drivers, Trans. of KSAE 18:4 115-120.
  2. Lee, D. E., Hwang, I. G., Jeon, D. I., Park, S. S., 2008, Development and Optimization of the Hybrid Engine System Model to Improve the Fuel Economy, Trans. of KSAE 16:6 65-73.
  3. James T. Allison., viewed 15 March 2007, Design Optimization Model for an Automotive Electric water Pump,
  4. Yang, H. C., Yoon, T. J., Hong, N. P., Kim, B. H., and Kim, B. H., 2011, Performance Test System of Underwater Bearing based on Labview, Conference of the Korea Society of mechanical Engineers, Korea, 418-420.
  5. Pierberg Pump Technology GmbH., viewed 2009, Electric coolant pumps-Always at the correct temperature, .
  6. Park, Y. J., Chung, S. C., 1997, Analysis and Optimal Design of Axial Magnetic Bearings, Conference of The Korean Society of Manufacturing Technology Engineers, Korea, 278-283.
  7. Joachim, G., Jurgen, H. T, and Claude, W., 1999, Inside the Canned Motor Centrifugal Pump, World Pumps 1999:396 58-61.
  8. Park, I. K., Kim, H. J., Hong, N. P., Park, D. Y., Seo, Y. H., Kim, B. H., 2012, Characteristic Analysis of Underwater Bearing for Canned Type Electric water pump, Conference of the Koean Society for Precision Engineering, Korea 737-738.
  9. Calum, S., 2004, Considerations for a Canned Motor Pump, World Pumps 2004:459, 22-25.
  10. Hirao, A., Shibuya, Y., Sekine, M., and Takayama, A., 2011, Evaluations of Ceramic Bearings Used in Electric Water Pumps, Tribology Online 6:1 71-75. https://doi.org/10.2474/trol.6.71
  11. Kim, D. S., Kang, S. Y., Hong, N. P., Yang, H. C., Kim, B. H. 2011, Optical Shape Design of underwater Bearing for Canned Motor Pump, Conference of the Korea Society of mechanical Engineers Korea, 447-450.
  12. Seong, S. M., 2010, Numerical Study on the Flow Through the Hydrostatic Bearing for a Rocket Engine Turbopump, Trans. 0f the KSME 92-99.