DOI QR코드

DOI QR Code

Area of Horn's Tip and Weldability of Cu Sheets

초음파 혼의 Tip 면적과 Cu 박판의 용착성

  • Jang, Ho Su (Dept. of Mechanical Engineering, Graduate School of Incheon National Univ.) ;
  • Kang, Eun Ji (Dept. of Mechanical Engineering, Graduate School of Incheon National Univ.) ;
  • Park, Dong Sam (Div. of Mechanical System Engineering, Incheon National Univ.)
  • Received : 2014.03.19
  • Accepted : 2014.04.01
  • Published : 2014.04.15

Abstract

In this study, a 20,000Hz ultrasonic horn was designed and fabricated using a finite element analysis. The horn's resonate frequency was 19,991Hz, and the harmonic response frequency was 20,000Hz. In order to observe the developed horn's performance, 4,000 pieces of displacement data were obtained using an optical sensor and were analyzed using a fast Fourier transform. Finally, the developed horn's resonate frequency was found to be 19,992Hz. The effect of the tip area of the developed horn on the weldability of a Cu sheet was experimentally investigated. It was found that the welding strengths of specimens welded using a small tip area were generally higherthan those of specimens welded using a large tip area.

Keywords

References

  1. STAPLA Ultrasonic Corp, viewed 13 Decomber 2013, Ultrasonic metal welding-Horizontal oscillation direction, .
  2. MIRIAN KISTI Report, viewed 13 Decomber 2013, The trend of technology for Vehicle Light Weight Materials and development strategy .
  3. Branson Ultrasonic Corp, viewed 13 Decomber 2013, Ultrasonic metal welding for wire splicing and termination .
  4. Seah, K. H. W., Wong, Y. S., Lee, L. C., 1993, Design of tool holders for ultrasonic machining using FEM, Journal of Materials Processing Technology 37 810-816.
  5. Lee, B. G., Kim, G. L., Kim, K. E., 2008, Design of Ultrasonic Vibration Tool Horn for Micromachining Using FEM, KSMTE Trans. 17:6 63-70.
  6. Amin, S. G., Ahmed, M. H. M., Youssef, H. A., 1995, Computer-aided design of Acoustic Horns for Ultrasonic Machining using Finiteelement analysis, Journal of Materials Processing Technology 55 254-260. https://doi.org/10.1016/0924-0136(95)02015-2
  7. Seo, J. S., 2009, Vibration Analysis for Optimal Design of Horn, Proceedings of the KSMTE Spring Conference, 380-383.
  8. Seo, J. S., Jang, S. M., Baek, S. Y., 2012, One-wavelength Ultrasonic Horn Design for Ultrasonic Machining of Mobile Phone Battery Terminal Welding, Journal of the Korean Society of Manufacturing Technology Engineers 21:1 70-75. https://doi.org/10.7735/ksmte.2012.21.1.070