Computers and Concrete

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Analytical model for CFRP strengthened circular RC column under elevated temperature

  • Rashid, Raizal S.M. (Department of Civil Engineering, Universiti Putra Malaysia) ;
  • Aboutaha, Riyad S. (L.C. Smith College of Engineering and Computer Science)
  • Received : 2013.09.25
  • Accepted : 2014.03.09
  • Published : 2014.05.30
⟨ Previous Next ⟩

Abstract

In order to increase the load carrying capacity and/or increase the service life of existing circular reinforced concrete bridge columns, Carbon Fiber Reinforced Polymer (CFRP) composites could be utilized. Transverse wrapping of circular concrete columns with CFRP sheets increases its axial and shear strengths. In addition, it provides good confinement to the concrete column core, which enhances the bending and compressive strength, as well as, ductility. Several experimental and analytical studies have been conducted on CFRP strengthened concrete cylinders/columns. However, there seem to be lack of thorough investigation of the effect of elevated temperatures on the response of CFRP strengthened circular concrete columns. A concrete confinement model that reflects the effects of elevated temperature on the mechanical properties of CFRP composites, and the efficiency of CFRP in strengthened concrete columns is presented. Tensile strength and modulus of CFRP under hot conditions and their effects on the concrete confinement are the primary parameters that were investigated. A modified concrete confinement model is developed and presented.

Keywords

References

  1. Al-Salloum, Y., M. Elsanadedy, H. and A. Abadel, A. (2011), "Behavior of FRP confined concrete after high temperature exposure", Construct. Build. Mater., 25(2), 838-850. https://doi.org/10.1016/j.conbuildmat.2010.06.103
  2. American Concrete Institute Committe 440 (2002), Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures, In: s.l.:s.n.
  3. Anon., 2008. National Climatic Data Center. (Online) Available at: http://www.ncdc.noaa.gov/extremes/extreme-us-climates.html#MHUMID-LHUMID
  4. Anon., 2012. Weather Underground. (Online) Available at: http://www.wunderground.com/history/airport/KUIL/2012/6/4/MonthlyHistory.html?req_city=NA&req_stat e=NA&req_statename=NA
  5. ASTM. (1995), Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, 14(02).
  6. Bae, S.W. and Belarbi, A. (2010), "Effects of Various Environmental Conditions on RC Columns Wrapped with FRP Sheets", J. Reinf. Plas. Compos., 29(2), 290-308. https://doi.org/10.1177/0731684408097768
  7. Bisby, L., Chen, J.F., Li, S.Q., Stratford, T.J. and Cueva, N. (2011), "Strengthening fire damage concrete by confinement with fibre reinforced polymer wraps", Eng. Struct., 33(12), 3381-3391. https://doi.org/10.1016/j.engstruct.2011.07.002
  8. Demers, M. and Neale, K.W. (1994), "Strengthening of concrete columns with unidirectional composite sheets. montreal", Can.Soc. Civil Eng., 895-905.
  9. El-Hacha, R., Green, M.F. and Wight, G.R. (2010), "Effect of Severe Environmental Exposures on CFRP Wrapped Concrete Columns", J. Compos. Construct., February, 14(1), 83-93. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000074
  10. Hadi, M. and Louk Fanggi, B. (2012), Behaviour of FRP Confined Concrete Cylinders Under Different Temperature Exposure, Lake Maggiore, s.n., 1187-1192.
  11. Harmon, T. and Slattery, K. (1992), Advanced composite confinement of concrete. Sheerbrooke, Canada, Canadian Society for Civil Engineering, 299-306.
  12. Harries, K. (1998), Axial behavior of reinforced concrete column retro with FRPC jackets. Tuscon, s.n., 411-425.
  13. Karabinis A.I. and Kiousis, P.D. (1996), "Plasticity computations for the design of the ductility of circular concrete columns", Comput. Struct., 60(5), 825-835. https://doi.org/10.1016/0045-7949(95)00442-4
  14. Karabinis A.I. and Kiousis, P.D. (2002), "Concrete confined by FRP material: A plasticity approach", Eng. Struct., 24(7), 923-932. https://doi.org/10.1016/S0141-0296(02)00011-1
  15. Karabinis, A.K.P. (2001), "Plasticity model for reinforced concrete elements subjected to overloads", J. Struct. Eng., 127(11), 1251-1256. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:11(1251)
  16. Lam, L. and Teng, J.G. (2002), "Strength models for fiber reinforced plastic confined concrete", ASCE J. Struct. Eng., 128(5), 612-623. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:5(612)
  17. Matthys, S., Taerwe, L. and Auddenaert, K. (1999), Test on axially loaded concrete columns confined by fiber reinforced polymer sheet wrapping.. Farmington, s.n., 217-229.
  18. Micelli, F., Myers, J.J. and Murthy, S.S. (2002), Performance of FRP Confined Concrete Subjected to Accelerated Enviromental Conditioning.. Montreal, s.n., 87-98.
  19. Miyauchi, K., Nishibayashi, S. and Inoue, S. (1997), Estimation of Strengthening effects with carbon fiber sheets for concrete columns. Sapporo, s.n., 217-224.
  20. Myers, J. and Ekenel, M. (2005), Effect of Environmental Conditions on Bond Strength between CFRP Laminate and Concrete Substrate. s.l., American Concrete Institute, 1571-1591.
  21. Picher, F., Rochette, P. and Labossiere, P. (1996), Confinement of concrete cylinders with CFRP. Tuscon, s.n., 829-841.
  22. Rousakis, T., Rakitzis, T. and Karabinis, A. (2012), "Design-oriented strength model for FRP-confined concrete members", ASCE J. Compos. Construct., 615-625.
  23. Steward, A. and Douglas, E.P. (2012), Accelerated Testing of Epoxy-FRP Composites for Civil Infrastructure Applications: Property Changes and Mechanism of Degradation. Polymer Review, 115-141.
  24. Toutanji, H. (1999), "Stress-strain characteristics of concrete columns externally confined with advanced fiber composite sheets", Mater. J., May, 96(3), 397-404.
  25. Toutanji, H.A. and Gomez, W. (1997), "Durability characteristics of concrete beams externally bonded with FRP composite sheets, Cement Concrete Compos., 351-358.
  26. Toutanji, H. and Balaguru, P. (1998), Durability Characteristics of concrete columns wrapped with fiber tow sheets, J. Mater. Civil Eng., February, 10(1), 52-57. https://doi.org/10.1061/(ASCE)0899-1561(1998)10:1(52)
  27. Wang, K., Young, B. and T. Smith, S. (2011), An experimental study on the mechanical properties of pultruded CFRP plates at elavated temperatures., Structures Congress ASCE, 3110-3119. https://doi.org/10.1061/41171(401)271
  28. Watanable, K. 1997, Confinement effect of FRP sheet on strength and ductility of concrete cylinders under uniaxial compression, Sapporo Japan, Japan Concrete Institute, 233-240.
  29. Xiao, Y. and Wu, H. (2000), Compressive Behavior of Concrete Confined by Carbon Fiber Composite Jackets, J. Mater. Civil Eng., May, 12(2), 139-146. https://doi.org/10.1061/(ASCE)0899-1561(2000)12:2(139)
  30. Zhang, S., Ye, L. and Mai, Y.W. (2000), A study on polymer composites strengthening systems for concrete columns.. Applied Composite Materials, May, 7(2-3), 125-138. https://doi.org/10.1023/A:1008917922156

Cited by

  1. Strength model for heat-damaged reinforced concrete circular columns confined with carbon fibre reinforced polymer fabrics vol.34, pp.22, 2015, https://doi.org/10.1177/0731684415601901
  2. Compressive behavior of circular and square concrete column externally confined by different types of basalt fiber-reinforced polymer vol.23, pp.8, 2014, https://doi.org/10.1177/1369433219898086
  3. Design-oriented strength and strain models for GFRP-wrapped concrete vol.26, pp.3, 2014, https://doi.org/10.12989/cac.2020.26.3.293
  4. Residual load carrying capacity of reinforced concrete cylinders after heating at elevated temperature vol.2, pp.10, 2020, https://doi.org/10.1007/s42452-020-03483-7
  5. Ultimate strain models derived using a Digital Image Correlation (DIC) system for preloaded RC columns subjected to heating and cooling and confined with CFRP sheets vol.41, pp.None, 2014, https://doi.org/10.1016/j.jobe.2021.102306