DOI QR코드

DOI QR Code

철도차량용 중공차축 설계에 관한 연구

Study on Design of Railway Hollow Axle

  • 손승완 (과학기술연합대학원대학교 가상공학) ;
  • 정현승 (과학기술연합대학원대학교 가상공학) ;
  • 최성규 (한국교통대학교 산학협력단)
  • Son, Seungwan (Department of Virtual Engineering, University of Science and Technology) ;
  • Jung, Hyunsung (Department of Virtual Engineering, University of Science and Technology) ;
  • Choi, Sungkyou (Industry and University Cooperation Foundation, Korea National University of Transportation)
  • 투고 : 2013.07.05
  • 심사 : 2014.01.21
  • 발행 : 2014.05.01

초록

The hollow design of a railway axle is one of the most effective methods to reduce the weight of an axle. However, the conventional hollow axle has the limitation of a lightweight design because it has the same bore diameter along the axial position. The new type of railway axle, the tapered inner surface railway axle, has a different inner diameter between the journal bearing seat and wheel seat. This design method is one way to increase the weight reduction possibility. The purpose of the present study is to establish and evaluate the design of the tapered inner surface railway axle. The case study and Finite Element Method(FEM) are applied to evaluate the strength of the lightweight railway axle according to the European Norm(EN 13103). Finally, the best design case for reducing the weight of the axle is drawn from the results of the case study.

키워드

참고문헌

  1. S. Iwnicki, Handbook of Railway Vehicle Dynamics, Tayler & Francis, Boca Raton, pp.39-83, 2006.
  2. S. W. Han, S. W. Son and H. S. Jung, "Weight Reduction of an Urban Railway Axle Based on EN Standard," Transactions of KSME, Vol.36, No.5, pp.579-590, 2012. https://doi.org/10.3795/KSME-A.2012.36.5.579
  3. R. Byrne, "Railroad Axle Design Factors," Journal of Engineering Indurstry, Vol.90, No.1, pp.33-42, No.67-RR-3, 1968. https://doi.org/10.1115/1.3604602
  4. Technical Report, Development of an Innovative High Performance Railway Wheelset, European Community, 2005.
  5. F. Schmieder and P. Kettner, "Manufacturing of Hollow Transmission Shafts via Bulk-metal Forging," Journal of Materials Processing Technology, Vol.71, No.1, pp.113-118, 1997. https://doi.org/10.1016/S0924-0136(97)00156-8
  6. G. C. Wang, G. Q. Zhao, X. H. Huang and Y. X. Jia, "Analysis and Design of a New Manufacturing Process for a Support Shaft Using the Finite Element Method," Journal of Materials Processing Technology, Vol.121, No.2-3, pp.259-264, 2002. https://doi.org/10.1016/S0924-0136(01)01240-7
  7. European Norm, EN 13103 : Railway Applications -Wheelsets and Bogies-Non-powered Axles-Design Method, British Standards Institution, 2009.
  8. European Norm, EN 13104 : Railway Applications -Wheelsets and Bogies-Powered Axles -Design Method, British Standards Institution, 2009.
  9. S. W. Son, H. S. Jung, S. W. Han, J. S. Kim and T. S. Kwon, "Parametric Study on Hollow Railway Axle Design," KSAE Spring Conference Proceedings, pp.2136-2139, 2013.
  10. Korean Strandards, KS R 9220 : Axles for Railway Rolling Stock, Korean Agency for Technology and Standard, 2009.
  11. K. Hirakawa and M. Kubota, "On the Fatigue Design Method for High-speed Railway Axles," Proc. Insin. Mech. Engrs., Vol.215, Part:F, pp.73-82, 2001. https://doi.org/10.1243/0954409011531413
  12. Japanese Indurstrial Standards, JIS E 4501 : Railway Rolling Stock-Design Methods for Strength of Axles, Japanese Industrial Standards Committee, 1995.
  13. G. Mancini, A. Corbizi, F. Lombardo and S. Cervello, "Design of Railway Axle in Compliance with the European Norms : High Strenghth Alloyed Steels Compared to Standard Steels," Proceedings of WCRR, UIC, 2006.
  14. A. Ghaei, M. R. Movahhedy and A. K. Taheri, "Study of the Effects of Die Geometry on Deformation in the Radial Forging Process," Journal of Materials Processing Technology, Vol.170, No.1-2, pp.156-163, 2005. https://doi.org/10.1016/j.jmatprotec.2005.04.100
  15. S. W. Son, H. S. Jung, S. W. Han, J. S. Kim and T. S. Kwon, "Structural Analysis of Hollow Railway Axle Design," KSAE Annual Conference Proceedings, pp.1764-1768, 2012.
  16. RADIOSS 11.0 User's Manual, Altair, 2011.
  17. H. Hirakawa, K. Toyama and M. Kubota, "The Analysis and Prevention of Failure in Railway Axles," Int. J. Fatigue, Vol.20, No.2, pp.135-144, 1998. https://doi.org/10.1016/S0142-1123(97)00096-0
  18. S. J. Choi and J. W. Kwon, "The Evaluation of Fretting Fatigue Behaviour on Rotary Bending Fatigue for Railway Axle Material," Transactions of KSAE, Vol.18, No.2, pp.74-82, 2010.