Structural Engineering and Mechanics

  • 제50권3호
  • /
  • Pages.365-382
  • /
  • 2014
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Sizing, geometry and topology optimization of trusses using force method and supervised charged system search

  • Kaveh, A. (Centre of Excellence for Fundamental Studies in Structural Engineering, Iran University of Science and Technology) ;
  • Ahmadi, B. (Centre of Excellence for Fundamental Studies in Structural Engineering, Iran University of Science and Technology)
  • 투고 : 2012.08.10
  • 심사 : 2014.03.09
  • 발행 : 2014.05.10
⟨ 이전 논문 다음 논문 ⟩

초록

In this article, the force method and Charged System Search (CSS) algorithm are used for the analysis and optimal design of truss structures. The CSS algorithm is employed as the optimization tool and the force method is utilized for analysis. In this paper in addition to member's cross sections, redundant forces, geometry and topology variables are considered as the optimization variables. Minimum complementary energy principle is used directly to analyze the structure. In the presented method, redundant forces are calculated by the CSS in order to minimize the energy function. Combination of the CSS and force method leads to an efficient algorithm in comparison to some of the optimization algorithms.

키워드

과제정보

연구 과제 주관 기관 : Iran National Science Foundation

참고문헌

  1. Argyris, J.H. and Kelsey, S. (1960), Energy theorems and structural analysis, Butterworth, London.
  2. Cassell, A.C., Henderson, J.C. de C. and Kaveh, A. (1974), "Cycle bases for the flexicility analysis of structures", Int. J. Numer. Methods Eng., 8, 521-528. https://doi.org/10.1002/nme.1620080308
  3. Felippa, C.A. (1975), "Solution of linear equations with skyline-stored symmetric matrix", Comput. Struct., 5, 13-29. https://doi.org/10.1016/0045-7949(75)90016-4
  4. Felix, J.E. (1981), "Shape optimization of trusses subjected to strength, displacement, and frequency constraint", Master thesis, Naval Postgraduate School.
  5. Hasancebi, O. and Erbatur, F. (2001), "Layout optimization of trusses using improved GA methodologies", Acta Mech., 146, 87-107. https://doi.org/10.1007/BF01178797
  6. Henderson, J.C. de C. (1960), "Topological aspects of structural analysis", Aircr. Eng., 32, 137-141. https://doi.org/10.1108/eb033249
  7. Henderson, J.C. de C. and Maunder, E.A.W. (1969), "A problem in applied topology: on the selection of cycles for the flexibility analysis of skeletal structures", J. Inst. Math. Appl., 5(2), 254-269. https://doi.org/10.1093/imamat/5.2.254
  8. Hwang, S.F. and He, R.S. (2006), "A hybrid real-parameter genetic algorithm for function optimization", Adv. Eng. Infor., 2, 7-21.
  9. Imai, K. and Schmit, Jr. A.L. (1981), "Configuration optimization of trusses", J. Struct. Div. ASCE, 107(ST5), 745-756.
  10. Kang, S.L. and Zong, W.G. (2005), "A new meta-heuristic algorithm for continuous engineering optimization: Harmony search theory and practice", Comput. Meth. Appl. Mech. Eng., 194, 3902-3933. https://doi.org/10.1016/j.cma.2004.09.007
  11. Kaveh, A. (1974), "Application of topology and matroid theory to the analysis of structures", Ph.D. Thesis. London University, Imperial College, London.
  12. Kaveh, A. (1992), "Recent development in the force method of structural analysis", 45, 402-418.
  13. Kaveh, A. (2004), Structural Mechanics: Graph and Matrix Methods, Research Studies Press Ltd, Somerset, U.K.
  14. Kaveh, A. (2006), Optimal Structural Analysis, John Wiley, Chechister, U.K.
  15. Kaveh, A. and Ahmadi, B. (2013), "Simultaneous analysis, design and optimization of structures using force method and supervised CSS algorithm", Scientia Iranica, 20, 65-76.
  16. Kaveh, A. and Kalatjari, V. (2004), "Size/geometry optimizationof trusses by the force method and genetic algorithm", Z. Angew. Math. Mech., 84(5), 347-357. https://doi.org/10.1002/zamm.200310106
  17. Kaveh, A. and Talatahari, S. (2010), "A novel hiuristic optimization method: Charged System Search", Acta Mech., 213, 267-289 https://doi.org/10.1007/s00707-009-0270-4
  18. Kaveh, A. and Talatahari, S. (2011), "An enhanced charged system search for configuration optimization using the concept of fields of forces", Struct. Multidisp. Optim., 43, 339-351. https://doi.org/10.1007/s00158-010-0571-1
  19. Kaveh, A. and Rahami, H. (2006), "Analysis, design and optimization of structures using force method and genetic algorithm", Int. J. Numer. Method. Eng., 10(65), 1570-1584.
  20. Lee, D.K., Kim, J.H., Starossek, U. and Shin, S.M. (2012) "Evaluation of structural outrigger belt Truss layouts for tall buildings by using topology Optimization", Struct. Eng. Mech., 43(6), 711-724. https://doi.org/10.12989/sem.2012.43.6.711
  21. Martinez, P., Marti, P. and Querin, O.M. (2007), "Growth method for size, topology, and geometry optimization of truss structures", Struct. Multidiscip. Optim., 33(1), 13-26.
  22. Ohsaki, M, and Katoh, N. (2005), "Topology optimization of trusses with stress and local constraints on nodal stability and member intersection", Struct. Multidiscip. Optim., 29(3), 190-197. https://doi.org/10.1007/s00158-004-0480-2
  23. Rahami, H., Kaveh, A. and Gholipour, Y. (2008), "Sizing, geometry and topology optimization of trusses via force method and genetic algorithm", Eng. Struct., 30, 2360-2369. https://doi.org/10.1016/j.engstruct.2008.01.012
  24. Rajan, S.D. (1995), "Sizing, shape and topology design optimizatin of trusses using genetic algorithm", J. Struct. Eng., ASCE, 121(10), 1480-1487. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:10(1480)
  25. Rajeev, S. and Krishnamoorthy, C.S. (1997), "Genetic algorithms-based methodologies for design optimization of trusses", J. Struct. Eng., ASCE, 11(3), 195-200.
  26. Soh, C.K. and Yang, J.P. (1996), "Fuzzy controlled genetic algorithm search for shape optimization", J. Comput. Civ. Eng., ASCE, 10(2), 143-150. https://doi.org/10.1061/(ASCE)0887-3801(1996)10:2(143)
  27. Tang, W, Tong, L. and Gu, Y. (1995), "Improved genetic algorithm for design optimization of truss structures with sizing, shape and topology variables", Int. J. Numer. Method. Eng., 62, 1737-1762.
  28. Toklu, Y.C., Bekdas, G. and Temur, R. (2013) "Analysis of Trusses by total potential Optimization method coupled with harmony search", Struct. Eng. Mech., 45(2), 183-199. https://doi.org/10.12989/sem.2013.45.2.183
  29. Wu, S.J. and Chow, P.T. (1995), "Integrated discrete and configuration optimization of trusses using genetic algorithms", Comput. Struct., 55(4), 695-702. https://doi.org/10.1016/0045-7949(94)00426-4
  30. Xie, H., Liu, F., Li, L. and Wang, C. (2009), "Topology Optimization of Truss Structures Based on the Improved Group Search Optimizer", AIP Conf. Proc., 1233, 707-712.
  31. Yang, J.P. (1996), "Development of genetic algorithm-based approach for structural optimization", Ph.D. Thesis, Nanyang Technology University, Singapore.
  32. Yang, J.P. and Soh, C.K. (1997), "Structural optimization by genetic algorithm with tournament selection", J. Comput. Civ. Eng., ASCE, 11(3), 195-200. https://doi.org/10.1061/(ASCE)0887-3801(1997)11:3(195)

피인용 문헌

  1. An improved fully stressed design evolution strategy for layout optimization of truss structures vol.164, 2016, https://doi.org/10.1016/j.compstruc.2015.11.009
  2. A Backtracking Search Algorithm for the Simultaneous Size, Shape and Topology Optimization of Trusses vol.13, pp.15, 2016, https://doi.org/10.1590/1679-78253101
  3. Colliding bodies optimization for size and topology optimization of truss structures vol.53, pp.5, 2015, https://doi.org/10.12989/sem.2015.53.5.847
  4. Parametric modeling and shape optimization design of five extended cylindrical reticulated shells vol.21, pp.1, 2016, https://doi.org/10.12989/scs.2016.21.1.217
  5. Parametric modeling and shape optimization of four typical Schwedler spherical reticulated shells vol.56, pp.5, 2015, https://doi.org/10.12989/sem.2015.56.5.813
  6. Cohort intelligence algorithm for discrete and mixed variable engineering problems 2018, https://doi.org/10.1080/17445760.2017.1331439
  7. Shape optimization for partial double-layer spherical reticulated shells of pyramidal system vol.55, pp.3, 2015, https://doi.org/10.12989/sem.2015.55.3.555
  8. Discrete optimal sizing of truss using adaptive directional differential evolution vol.1, pp.3, 2016, https://doi.org/10.12989/acd.2016.1.3.275
  9. Size, shape, and topology optimization of planar and space trusses using mutation-based improved metaheuristics 2017, https://doi.org/10.1016/j.jcde.2017.10.001
  10. Topology optimization of truss subjected to static and dynamic constraints by integrating simulated annealing into passing vehicle search algorithms pp.1435-5663, 2018, https://doi.org/10.1007/s00366-018-0612-8
  11. A novel self-adaptive hybrid multi-objective meta-heuristic for reliability design of trusses with simultaneous topology, shape and sizing optimisation design variables vol.60, pp.5, 2014, https://doi.org/10.1007/s00158-019-02302-x
  12. Optimum design of shape and size of truss structures via a new approximation method vol.76, pp.6, 2014, https://doi.org/10.12989/sem.2020.76.6.799
  13. A non-uniform cellular automata framework for topology and sizing optimization of truss structures subjected to stress and displacement constraints vol.242, pp.None, 2021, https://doi.org/10.1016/j.compstruc.2020.106394
  14. A Comparative Study of Recent Multi-objective Metaheuristics for Solving Constrained Truss Optimisation Problems vol.28, pp.5, 2021, https://doi.org/10.1007/s11831-021-09531-8