Journal of the Korea Concrete Institute (콘크리트학회논문집)

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

Flexural Behavior of Ultra High Performance Fiber Reinforced Concrete Segmental Box Girder

초고강도 섬유보강 콘크리트 분절형 박스 거더의 휨거동

  • Guo, Qingyong (School of Civil and Environmental Engineering, Kumoh National Institute of Technology) ;
  • Han, Sang-Mook (School of Civil and Environmental Engineering, Kumoh National Institute of Technology)
  • 궈칭용 (금오공과대학교 토목환경공학부) ;
  • 한상묵 (금오공과대학교 토목환경공학부)
  • Received : 2013.08.19
  • Accepted : 2014.01.03
  • Published : 2014.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

The flexural behavior test of UHPC segmental box girder which has 160 MPa compressive strength and 15.4 m length was carried out. The effect of steel fibers in combination with reinforcing bars on improving the ductile performance of UHPC box girder was evaluated by comparing the flexural behavior of the UHPC segmental box girders made by the two kinds of mixing portion. The test variables are volume fraction of steel fibers and the arrangement of reinforcing bars. The behavior of UHPC box girder BF2 composed of 1% volume fraction of steel fibers and longitudinal reinforcing bars in web and upper flange with stirrup showed the similar ductile behavior with the girder BF1 composed of 2% volume fraction without stirrup in elastic stress region. But BF1 had the better stiffness and showed the more ductile behavior in inelastic stress region. Segmental interfaces of UHPC box girder have not any crack and slide until the final flexural collapse load.

압축강도 160MPa과 길이 15.4 m를 가진 초고강도 섬유보강 콘크리트 분절박스 거더의 휨거동 실험을 수행하였다. 초고강도 섬유보강 콘크리트 분절 박스에 연성거동 특성을 보강하기 위한 강섬유와 종방향철근의 조합 효과를 두종류의 강섬유 혼입률로 제작된 초고강도 분절형 박스거더의 휨거동을 비교함으로써 평가하였다. 강섬유 혼입률이 1%이고 전단철근과 상부플랜지와 복부에 종방향철근으로 보강한 초고강도 콘크리트 박스거더 BF2의 거동은 탄성응력대에서 전단철근 없이 강섬유 혼입률 2%인 초고강도 섬유보강 콘크리트 박스거더와 유사한 연성거동을 보여준다. 그러나 비선형응력대에서는 BF1의 강성이 약간 더 크고 안정적인 연성거동 형태를 보여주고 있다. 초고강도 섬유보강 콘크리트 박스거더의 분절면은 휨파괴 시까지 균열이나 슬립이 발생하지 않았다.

Keywords

References

  1. Chan, S. Y. N., Feng, N. Q., and Tsang, M. K. C., "Durability of High Strength Concrete Incorporating Carrier Fluidifying Agent," Magazine of Concrete Research, Vol. 52, No. 4, 2000, pp. 235-242. https://doi.org/10.1680/macr.2000.52.4.235
  2. Hsu, L. S. and Hsu, T., "Stress-Strain Behavior of Steel-Fiber High-Strength Concrete under Compression," ACI Journal of Structure, Vol. 91, No. 4, 1994, pp. 448-457.
  3. Korea Institute of Construction and Transportation, "Development of Bridge Girder Using Ultra-High Performance Concrete Composites," Final Report of Development and Research of the Core Technique in Construction, Ministry of Construction and Transportation, 2005, pp. 266-297.
  4. Benjamin, A. and Graybeal. B., "UHPC in the U. S. Highway Transportation System," Proceedings of the Second International Symposium on UItra High Performance Concrete, Kassel, Germany, 2008, pp. 11-18.
  5. Han, S. M. and Guo, Q. Y., "Flexural Experiment of Over Reinforced Prestressed High Performance Fiber Reinforced Concrete Girder," Journal of the Korean Society of Hazard Mitigation, Vol. 11, No. 3, 2011, pp. 9-11.
  6. Pierre Richard, Marcel Cheyrezy, "Composition of Reactive Powder Concretes," Cement and Concrete Research, Vol. 25, No. 7. 1995, pp. 1501-1511. https://doi.org/10.1016/0008-8846(95)00144-2