DOI QR코드

DOI QR Code

An Algorithm for Automatic Determination and Calculation of Volumetric Spaces of Submerged Bodies

잠수체의 구획 분류 및 체적 계산을 위한 구획 결정 알고리즘

  • Park, Inha (Department of Naval Architecture & Ocean System Engineering, Graduate School, Korea Maritime and Ocean University) ;
  • Nam, Jong-Ho (Division of Naval Architecture & Ocean System Engineering, Korea Maritime and Ocean University)
  • 박인하 (한국해양대학교 대학원 조선해양시스템공학과) ;
  • 남종호 (한국해양대학교 조선해양시스템공학부)
  • Received : 2014.01.11
  • Accepted : 2014.02.21
  • Published : 2014.04.20

Abstract

Submerged bodies such as autonomous underwater vehicles (AUV) or remotely operated vehicles (ROV) are widely used in various fields of exploring underseas. Those bodies keep ballasting and deballasting for stable navigation and operation. Identifying the internal volumetric spaces of the bodies is a primary step for such an operation. Unfortunately, most CAD models given to the engineer do not properly represent the compartments since each face of a compartment exists as an independent entity rather than as a face that belongs to the compartment. In this paper, an algorithm that automatically identify the faces as a group that forms a closed volumetric space, i.e., a compartment is presented. A submerged body is sliced into a number of cross sections. Each sliced section is analyzed to yield closed loops that are sections of the compartment. Then, the associated closed loops are gathered along the longitudinal direction to form a compartment. The algorithm presented is shown to provide a practical and reasonable solution that can readily be used in various applications.

Keywords

References

  1. ACIS, 2013. 3D ACIS Modeling. [Online] Available at: http://www.spatial.com/ [Accessed 15 December 2013].
  2. Choi, D. Yim, K. & Kim, S., 2008. A Study On the Position Control System of the Small ROV Using Sonar Sensors. Journal of the Society of Naval Architects of Korea, 45(6), pp.579-589. https://doi.org/10.3744/SNAK.2008.45.6.579
  3. Reed, K. Harrod, D. & Conroy, W., 1990. The Initial Graphics Exchange Specification (IGES) Version 5.0. U.S. Department of Commerce, National Institute fo Standards and Technology: Gaithersburg, MD.
  4. OCCT, 2013. Open CASCADE technology documentation. [Online] Available at: http://www.opencascade.org/ [Accessed 15 December 2013].
  5. Parasolid, 2013. Siemens corporation. [Online] Available at: http://www.siemens.com/ [Accessed 15 December 2013].
  6. Piegl, L. & Tiller, W., 1997. The NURBS Book. 2nd ed. New York: Springer.
  7. Park, I. & Nam, J.H., 2013. Definition of volume of watertight compartments in complex structural body modeled with surface entities. The Joint Conference of the Korean Association of Ocean Science and Technology Societies 2013, Jeju, Korea, 23-25 May 2013.
  8. Seol, D. Rhee, K. & Yeo, D., 2005. An Experimental Study of the Submerged Depth Effect on the Manoeuvrability in a Horizontal Plane of an Underwater Vehicle. Journal of the Society of Naval Architects of Korea. 42(6), pp.551-558. https://doi.org/10.3744/SNAK.2005.42.6.551