Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지
DOI QR코드

DOI QR Code

Forming Conditions of Curved Glass using Force Applying System of Glass Molding System

유리성형시스템의 힘측정기반 가압장치를 이용한 곡면유리 성형조건

  • Hong, Tae Kyeong (Department of Control & Instrumentation Engineering, ERI, Gyeongsang National Univ.) ;
  • Kim, Gab Soon (Department of Control & Instrumentation Engineering, ERI, Gyeongsang National Univ.)
  • 홍태경 (경상대학교 제어계측공학과) ;
  • 김갑순 (경상대학교 제어계측공학과)
  • Received : 2013.12.19
  • Accepted : 2014.03.25
  • Published : 2014.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes the forming conditions of smart-phone curved glass using the glass molding system with force applying system. The force applying system is composed of a body, a motor and gear, a rectilinear movement structure, a force sensor, a LVDT sensor (Linear Variable Differential Transformer), a up and down moving block, and so on. The glass molding system for characteristic test to find the forming conditions consists of the force applying system and a chamber, a metallic mold, a upper heater, a lower heater and so on. The characteristic test for forming conditions of smart-phone curved glass was carried out at forming temperature $620^{\circ}C$ and $650^{\circ}C$ using the glass molding system. As a result of the characteristic test, the forming conditions of curved glass could be found, and it is thought that the conditions can be used to apply to the system for producing in large quantities.

Keywords

References

  1. Kuk, K. H., Kim, K. S., and Jung, D. Y, "Temperature Analysis of the Production System for Aspherical Lens and Optimization of Production Conditions," Proc. of KSPE Spring Conference, pp. 51-52, 2008.
  2. Kuk, G. H., Jung, D. Y., and Kim, G. S., "Development of Molding System for Manufacturing a Small Lens and Its Force Control," J. Korean Soc. Precis. Eng., Vol. 25, No. 2, pp. 57-64, 2008.
  3. Kuk, K. H., Kim, G. S., and Jung, D. Y., "Development of a Convective Sequential Production System for Aspheric Lens," J. Korean Soc. Precis. Eng., Vol. 28, No. 2, pp. 2002-2010, 2011.
  4. Jung, D. Y. and Lee, Y. H./Daeho Technology Korea Co. LTD, "Moulding Device of Curved Glass," KOR Patent, No. 10-2013-0126308, 2013.
  5. Jung, D. Y., Lee, Y. H., and Daeho Technology Korea Co. LTD, "Pre-heating Device of Curved Glass Moulding Device," KOR Patent, No. 10-2013- 0126312, 2013.
  6. Kim, G. S., Kim, H. M., Song, Y. W., Jung, D. Y., Jung, Y. H., and et al., "Development of Force and Position Measuring System of the Pressure System for Manufacturing a Smart Phone's Curved," Proc. of KSPE Spring Conference, pp. 773-774, 2013.
  7. Shin, H. J., Lee, J. K., Bang, Y. J., Lee, K. G., Jung, D. Y., and et al., "Heat Flux Conditions for Uniform Temperature Distribution of Mobile Device Cover Glass Mold," Proc. of KSPE Spring Conference, pp. 763-764, 2013.
  8. Kim, G. S., Kim, H. M., Song, Y. W., Jung, D. Y., Jung, Y. H., and et al., "Design of Pressurized System for Curved Glass Forming," Proc. of KSPE Autumn Conference, pp. 651-652, 2012.
  9. Kim, S. B., Chung, W. J., Lee, D. S., Kim, M. S., Jung, D. Y., and Park, J. H., "Optimal Design of 2.5D Glass Manufacturing Automation Equipment's Molding Transfer Unit Using TRIZ," Proc. of KSPE Spring Conference, pp. 777-778, 2013.
  10. Shin, H. J., Lee, J. K., Bang, Y. J., Lee, K. G., Jung, D. Y., and et al., "Thermal Analysis of Molding System for Mobile Device Cover Glass," Proc. of KSPE Spring Conference, pp. 765-766, 2013.
  11. Kim, G. S. and Yoon, J. W., "Development of Calibration System for Multi-Axis Force/Moment Sensor and its Uncertainty Evaluation," J. Korean Soc. Precis. Eng., Vol. 24, No. 10, pp. 91-98, 2007.