참고문헌
- Vavrik, D., 2012, "Crack Behavior in Ductile Thin Wall Materials," Technology for Next Generation Vehicle, Vol. 15, pp. 27-33.
- Chu, S. J. and Liu, C., 2012, "Finite Element Simulation of Fatigue Crack Growth: Determination of Exponent m in Paris Law," Trans. Korean Soc. Mech. Eng. A, Vol. 36, No. 7, pp. 713-721. https://doi.org/10.3795/KSME-A.2012.36.7.713
- Sander, M. and Richard, H. A., 2005, "Finite Element Analysis of Fatigue Crack Growth with Interspersed Mode I and Mixed Mode Overloads," International Journal of Fatigue, Vol. 27, No. 8, pp. 905-913. https://doi.org/10.1016/j.ijfatigue.2004.10.008
- Moes, N., Dolbow, J. and Belytschko, T., 1999, "A Finite Element Method for Crack Growth Without Remeshing," International Journal for Numerical Methods in Engineering, Vol. 46, No. 1, pp. 131-150. https://doi.org/10.1002/(SICI)1097-0207(19990910)46:1<131::AID-NME726>3.0.CO;2-J
- AlloysKeswani, K., Singh, K. L. and Arokkiaswamy, A., 2012, "Computation of SIF and Crack Growth Simulation Using XFEM Techniques," International Conference on Advanced Research in Mechanical Engineering.
- Das, P., Singh, I. V. and Jayaganthan, R., 2012, "Crack Growth Simulation of Bulk and Ultrafine Grained 7075 Al Alloy by XFEM," International Journal of Materials & Product Technology, Vol. 44, No. 3-4, pp. 252-276. https://doi.org/10.1504/IJMPT.2012.050192
- Gigliotti, L., 2012, "Assessment of the Applicability of XFEM in Abaqus for Modeling Crack Growth in Rubber," Master Thesis, KTH School of Engineering Sciences.
- Jiang, Y., Tay, T. E., Chen, L. and Sun, X. S., 2013, "An Edge-Based Smoothed XFEM for Fracture in Composite Materials," International Journal of Fracture, Vol. 179, No. 1-2, pp. 179-199. https://doi.org/10.1007/s10704-012-9786-z
- LEVEN, M., 2012, "Stationary 3D Crack Analysis with Abaqus XFEM for Integrity Assessment of Subsea Equipment," Master Thesis, Chalmers University of Technology.
- Seabra, M. R., Sustaric, P., Cesar de Sa, J. A. and Rodic, T., 2012, "Damage Driven Crack Initiation and Propagation in Ductile Metals Using XFEM," Computational Mechanics, pp. 1-19.
- Ye, C., Shi, J. and Cheng, G. J., 2012, "An eXtended Finite Element Method (XFEM) Study on the Effect of Reinforcing Particles on the Crack Propagation Behavior in a Metal-Matrix Composite," International Journal of Fatigue, Vol. 44, pp. 151-156. https://doi.org/10.1016/j.ijfatigue.2012.05.004
- Mesh-Independent Fracture Modeling Using the Extended Finite Element Method(XFEM), http://www. simulia.com/services/training/wbtAbaqus69.
- ABAQUS Ver. 6.10, Abaqus/CAE User's Manual.
- Belytschko, T. and Black, T., 1999, "Elastic Crack Growth in Finite Elements with Minimal Remeshing," International Journal for Numerical Methods in Engineering, Vol. 45, No. 5, pp. 601-620. https://doi.org/10.1002/(SICI)1097-0207(19990620)45:5<601::AID-NME598>3.0.CO;2-S
- ABAQUS Ver. 6.10, Abaqus Analysis User's Manual.
- Du, Z., "eXtended Finite Element Method (XFEM) in Abaqus," http://www.simulia.com/download/rum11/ UK/Advanced-XFEM-Analysis.pdf.
- Reinhardt, L. and Cordes, J., 2010, "XFEM Modeling of Mixed-Mode Cracks in Thin Aluminum Panels," 2010 Simulia Customer Conference, pp. 1-13.
- Kim, Y. S., 2000, "Fracture Characteristics of Aluminum Alloy Composites Reinforced with Carbide Particles," School of Metallurgical and Materials Engineering, Kookmin Univ.,, Vol. 22, pp. 43-51.
- http://www.matweb.com.
- Pourmodheji, R. and Mashayekhi, M., 2012, "Improvement of the Extended Finite Element Method for Ductile Crack Growth," Materials Science and Engineering: A, Vol. 551, pp. 255-271. https://doi.org/10.1016/j.msea.2012.05.014
- Sobotka, J. C., 2010, "Steady Crack Growth Through Ductile Metals: Computational Studies," Ph.D. Thesis, University of Illinois at Urbana-Champaign.
피인용 문헌
- Evaluation of stress and crack behavior using the extended finite element method in the composite layer of a type III hydrogen storage vessel vol.32, pp.5, 2018, https://doi.org/10.1007/s12206-018-0407-2