References
- A. Aradian, E. Raphael, and P.-G. de Gennes, "Strengthening of a polymer interface : interdiffusion and crosslinking", Macromolecules, 33, 9444 (2000). https://doi.org/10.1021/ma0010581
- Y. H. Kim and R. P. Wool, "A theory of healing at a polymer- polymer interface", Macromolecules, 16, 1115 (1983). https://doi.org/10.1021/ma00241a013
- S. S. Voyutskii, "Autohesion and Adhesion of High Polymers", Interscience Publishers, New York, 1963, Chapters 1 and 2, pp. 5-59.
- G. R. Hamed, "Tack and Green Strength of Elastomeric Materials", Rubber Chem. Technol., 54, 576 (1981). https://doi.org/10.5254/1.3535821
- C. K. Rhee and J. C. Andries, "Factors Which Influence Autohesion of Elastomers", Rubber Chem. Technol., 54, 101 (1981). https://doi.org/10.5254/1.3535785
- G. R. Hamed and G. D. Roberts, "Comparison of the Effect of a Hydrocarbon Oil and a Terpene Tackifier on the Autohesion of Styrene-Butadiene Rubber", J. Adhes., 47, 95 (1994). https://doi.org/10.1080/00218469408027092
- A. K. Bhowmick, P. P. De and A.K. Bhattacharyya, "Adhesive tack and green strength of EPDM rubber", Polym. Eng. Sci., 27, 1195 (1987). https://doi.org/10.1002/pen.760271513
- K. D. Kumar, A. H. Tsou and A. K. Bhowmick, "Unique Behavior of Hydrocarbon Resin Tackifier on Unaged and Aged Tack of Brominated Isobutylene-co-p-methylstyrene (BIMS) Rubber", J. Adhes. Sci. Technol., 22, 2039 (2008). https://doi.org/10.1163/156856108X332552
- J. R. Beatty, "Tel-Tak: A Mechanical Method for Estimating Both Tackiness and Stickiness of Rubber Compounds", Rubber Chem. Technol., 42, 1040 (1969). https://doi.org/10.5254/1.3539277
- W. F Busse, J. M Lambert and R. B. Verdery, "Tackiness of GR‐S and Other Elastomers," J. Appl. Phys., 17, 376 (1946). https://doi.org/10.1063/1.1707726
- R. K. Beckwith, L. M. Welch, J. F. Nelson, A. L. Chaney, and E. A. McCracken, "Tack of Butyl and Natural Rubbers", Rubber Chem. Technol., 23, 933 (1950). https://doi.org/10.5254/1.3547098
- B. Kumar, P. P. De, S. K. De, D. G. Peiffer, and A. K. Bhowmick, "Tack and green strength of brominated isobutylene- co-p-methylstyrene and its blends", J. Adhes. Sci. Technol., 15, 1145 (2001). https://doi.org/10.1163/156856101317048671
- T. K. Bhaumik, B. R. Gupta, and A. K. Bhowmick, "Tack and green strength of filled blends of bromobutyl and EPDM rubbers", J. Adhes. Sci. Technol., 1, 227 (1987). https://doi.org/10.1163/156856187X00238
- R. A. Vaia and D. Lincoln, "Polymer Nanocomposites: Synthesis, Characterization and Modeling", R. Krishnamoorti, and R. A. Vaia, Eds.; ACS Symposium Series No. 804, American Chemical Society: Washington, DC,; Chapter 9, 102 (2000).
- S. S. Ray and M. Okamoto, "Polymer/layered silicate nanocomposites: a review from preparation to processing", Prog. Polym. Sci., 28, 1539 (2003). https://doi.org/10.1016/j.progpolymsci.2003.08.002
- M. Maiti, M. Bhattacharya, and A. K. Bhowmick, "Elastomer Nanocomposites", Rubber Chem. Technol., 81, 384 (2008). https://doi.org/10.5254/1.3548215
- S. Sadhu and A. K. Bhowmick, "Preparation and Properties of Nanocomposites Based on Acrylonitrile-Butadiene Rubber, Styrene-Butadiene Rubber, and Polybutadiene Rubber", J. Polym. Sci.; Polym. Phys., 42, 1573 (2004). https://doi.org/10.1002/polb.20036
- M. Maiti, and A. K. Bhowmick, "Structure and properties of some novel fluoroelastomer/clay nanocomposites with special reference to their interaction", J. Polym. Sci.; Polym. Phys., 44, 162 (2006). https://doi.org/10.1002/polb.20680
- M. Maiti and A. K. Bhowmick, "New fluoroelastomer nanocomposites from synthetic montmorillonite", Compos. Sci. Technol., 68, 1 (2008). https://doi.org/10.1016/j.compscitech.2007.05.042
- M. Bhattacharya and A. K. Bhowmick, "Polymer-filler interaction in nanocomposites: New interface area function to investigate swelling behavior and Young's modulus", Polymer, 49, 4808 (2008). https://doi.org/10.1016/j.polymer.2008.09.002
- M. Bhattacharya, M. Maiti, and A. K. Bhowmick, "Tailoring properties of styrene butadiene rubber nanocomposite by various nanofillers and their dispersion", Polym. Eng. Sci., 49, 81 (2009). https://doi.org/10.1002/pen.21224
- A. Choudhury, A. K Bhowmick, and C. Ong, "Novel role of polymer-solvent and clay-solvent interaction parameters on the thermal, mechanical and optical properties of polymer nanocomposites", Polymer, 50, 201 (2009). https://doi.org/10.1016/j.polymer.2008.10.044
- O. K. F Bussemaker, "Tack in Rubber", Rubber Chem. Technol., 37, 1178 (1964). https://doi.org/10.5254/1.3540398
- W. Hofmann, "Rubber Technology Handbook", Hanser Gardner Publications, 2000.
- S. Prager and M. Tirrell, "The Healing Process at Polymer-Polymer Interfaces", J. Chem. Phys., 75, 5194 (1981). https://doi.org/10.1063/1.441871
- R. J. Roe, D. D. Davis, and T. K. Kwei, "Mobility Of Polymer Segments Adsorbed On Solids As Studied By Pulsed NMR Technique", Bull. Am. Phys. Soc., 15, 308 (1970).
- C. Nah, J. Jose, J.-H. Ahn, Y.-S. Lee, and A. N. Gent, "Adhesion of carbon black to elastomers", Polym. Test., 31, 248 (2012). https://doi.org/10.1016/j.polymertesting.2011.11.007
Cited by
- Preparation and Characterization of Rubber Blends for Industrial Tire Tread Fabrication vol.2018, pp.1687-9430, 2018, https://doi.org/10.1155/2018/2473286