초록
본 연구에서는 국내 모래의 공학적 특성을 파악하기 위하여 표준사, 욕지사, 낙동강사를 이용하여 구속압 조건, $K_0$ 조건, 과압밀 조건, 상대밀도 조건을 다르게하여 삼축압축시험을 실시하였다. 삼축압축시험 결과, 변형률 ${\epsilon}_1$에 따른 축차응력 $\acute{q}$의 변화는 구속압 ${\sigma}_3$와 상대밀도 $D_r$이 클수록 크게 변화하였으나, $K_0$ 조건과 과압밀 조건변화와 크게 상관이 없었다. 모래의 최대 내부마찰각(${\phi}_{max}$)은 구속압이 클수록 입자간의 접촉력이 크게 되어 작아지는 경향을 나타내었고, $K_0$ 조건과 과압밀 조건에 따라서는 거의 변화가 없는 것으로 나타났으며, 상대밀도에 따라서는 상대밀도가 감소함에 따라 내부마찰각도 작아지는 경향을 나타내었다. 체적변형률(${\epsilon}_u$)은 구속압이 클수록 입자의 파쇄성과 입자간의 재배열에 의해 체적 팽창이 작게 나타났으며, $K_0$ 조건과 과압밀 조건에서는 조건에 상관없이 거의 같은 거동을 보였고, 상대밀도에 따라서는 상대밀도가 커질수록 초기에는 압축되다가 축변형률(${\epsilon}_1$)이 증가할수록 팽창하는 경향이 뚜렷하게 나타났다. 변형률 변화에 따른 탄성계수 $E_{sec}$는 변형률이 커질수록 차츰 수렴하는 경향을 나타내었고, 축차응력($\acute{q}$)-변형률(${\epsilon}_1$) 관계에서 초기할선 탄성계수($E_{ini}$)>할선 탄성계수($E_{sec}$)>접선 탄성계수($E_{tan}$) 순으로 탄성계수의 크기가 산정되었으며, 구속압 및 상대밀도가 증가함에 따라 탄성계수가 증가하는 경향을 보였고, $K_0$ 및 과압밀에 따라서는 거의 비슷한 탄성계수를 나타내었다. 접선 탄성계수에 의한 정규화에 대해서는 다양한 증가비로 증가하는 경향을 보였다. 한계상태선의 기울기 M은 구속압이 증가함에 따라 감소하는 경향을 나타내었고, $K_0$ 및 구속압, 상대밀도에 따라서는 동일선상에 표현되며, 상대밀도가 증가할수록 한계상태선의 기울기 M도 증가하는 경향을 보였다.
This study conducted experiment for understanding engineering characteristics of domestic sands by examining standard sand and sand from Yokji Island and Nakdong River in terms of confining pressure, $K_0$, over consolidation and relative density factors through triaxial compression test. The test showed that deviator stress by strain positively changed as confining pressure and relative density grow while $K_0$ and over consolidation factors do not directly correlated with it. Angle of internal friction decreases as confining pressure increases which strengthens contact force between particles, and declines as relative density drops, whereas $K_0$ and over consolidation factors hardly affect the results. When it comes to volumetric strain, volume expansion decreases as confining pressure increase due to crushability and rearrangement of particles while $K_0$ and over consolidation shows same movement unconditionally, and relative density appears compressed as it grows at the beginning however it expands as axial strain increases. Modulus of elasticity ($E_{sec}$) by strain has tendency into convergence resulting in initial secant modulus of elasticity ($E_{ini}$) > secant modulus of elasticity($E_{sec}$) > tangent modulus of elasticity ($E_{tan}$). On the other hand, it grows as confining pressure and relative density increase while indicating similar modulus of elasticity ($E_{sec}$) regarding on $K_0$ and over consolidation. Slope of critical line (M) tended to decrease as confining pressure increases, follow same line according to $K_0$, confining pressure and relative density, and increase as relative density grows.