DOI QR코드

DOI QR Code

Dynamic analysis of a historical monument: retrofit using shape memory alloy wires

  • Hamdaoui, Karim (Department of Civil Engineering, Faculty of Technology, University of Tlemcen) ;
  • Benadla, Zahira (Department of Civil Engineering, Faculty of Technology, University of Tlemcen)
  • 투고 : 2013.11.30
  • 심사 : 2014.01.30
  • 발행 : 2014.03.25

초록

The effectiveness of using the advanced seismic protection technology based on shape memory alloy (SMA) dampers to preserve a historical minaret is investigated. The proposed studied case, the minaret of Mansourah, is a seven century old minaret located in Tlemcen, Algeria. Its original height was of 47m, while nowadays, the monument is half destructed and its current height reaches the 40m. The proposed seismic retrofit is based on the technique that utilizes SMA wires as dampers for the upper flexible part of the minaret. The effectiveness of the proposed technique is numerically evaluated via non-linear finite element analysis using the structural software ANSYS. The effectiveness of the proposed device in mitigating the seismic hazard is demonstrated by the effective reduction in its dynamic response.

키워드

참고문헌

  1. AlSaleh, R., Casciati, F., El-Attar, A. and El-Habbal, I. (2011), "Experimental validation of a shape memory alloy retrofitting application", J. Vib. Control, 18(1), 28-41.
  2. ANSYS computer software (2003), ANSYS Inc., www.ansys.com.
  3. Auricchio, F., Faravelli, L., Magonette, G. and Torra, V. (2001), Shape memory alloys: advances in modelling and applications, (Ed. CIMNE), Barcelona, Spain.
  4. Auricchio, F., Taylor, R.L. and Lubliner, J. (1997), "Shape-memory alloys: macromodeling and numerical simulations of the superelastic behavior", Comput. Method. Appl. M., 146, 281-312. https://doi.org/10.1016/S0045-7825(96)01232-7
  5. Bani-Hani, K., Zibdeh, H. and Hamdaoui, K. (2008), "Health monitoring of a historical monument in Jordan based on ambient vibration test", Smart Struct. Syst., 4(2), 195-208. https://doi.org/10.12989/sss.2008.4.2.195
  6. Bendimerad, F. (2004), "The 21 May 2003 Boumerdes earthquake lessons learned and recommendations", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, August.
  7. Boumechra, N., Casciati, F. and Hamdaoui, K. (2010), "Diagnosis, seismic analysis and reinforcement of an old building in El-Maleh, Algeria", Earthq. Eng. Eng. Vib., 9(4) 577-586.
  8. Carreras, G., Casciati, F., Casciati, S., Isalgue, A., Marzi, A. and Torra, V. (2011), "Fatigue laboratory tests toward the design of SMA portico-braces", Smart Struct. Syst., 7(1), 41-57. https://doi.org/10.12989/sss.2011.7.1.041
  9. Casciati, F. (Ed.) (2003), Proceeding of the 3rd World Conference on Structural Control, John Wiley & sons, Chichester.
  10. Casciati, F. and Faravelli, L. (2004), "Experimental characterization of a Cu-based shape memory alloy toward its exploitations in passive control devices", J. de Physique IV, 115, 299-306.
  11. Casciati, F. and Hamdaoui, K. (2008), "Modelling the uncertainty in the response of a base isolator", Probabilist. Eng. Mech., 23(4), 427-437. https://doi.org/10.1016/j.probengmech.2007.10.014
  12. Casciati, F. and van der Eijk, C. (2008), "Variability in mechanical properties and microstructure characterization of CuAlBe shape memory alloys for vibration mitigation", Smart Struct. Syst., 4(2), 103-121. https://doi.org/10.12989/sss.2008.4.2.103
  13. Casciati, F., Casciati, S. and Faravelli, L. (2007), "Fatigue characterization of a Cu-based shape memory alloy", Proceedings of the Estonian Academy of Sciences - Physics Mathematics, 56(2), 207-217.
  14. Casciati, F., Casciati, S., Faravelli, L. and Marzi, A. (2011), "Fatigue damage accumulation in a Cu-based shape memory alloy: preliminary investigation", CMC-Comput. Mater. Continua, 23(3), 287-306.
  15. Casciati, F., Faravelli, L. and Al Saleh, R. (2009), "An SMA passive device proposed within the highway bridge benchmark", Struct. Control Health Monit., 16(6), 657-667. https://doi.org/10.1002/stc.332
  16. Casciati, S. and Al-Saleh, R. (2010), "Dynamic behavior of a masonry civic belfry under operational conditions", Acta Mechanica, 215(1-4), 211-224. https://doi.org/10.1007/s00707-010-0343-4
  17. Casciati, S. and Faravelli, L. (2008), "Structural components in shape memory alloy for localized energy dissipation", Comput. Struct., 86(3-5), 330-339. https://doi.org/10.1016/j.compstruc.2007.01.037
  18. Casciati, S. and Faravelli, L. (2010), "Vulnerability assessment for medieval civic towers", Struct. Infrastruct. E., 6(1-2), 193-203. https://doi.org/10.1080/15732470802664290
  19. Casciati, S. and Hamdaoui, K. (2008), "Experimental and numerical studies toward the implementation of shape memory alloy ties in masonry structures", Smart Struct. Syst., 4(2), 153-169. https://doi.org/10.12989/sss.2008.4.2.153
  20. Casciati, S. and Marzi, A. (2010), "Experimental studies on the fatigue life of shape memory alloy bars", Smart Struct. Syst., 6(1), 73-85. https://doi.org/10.12989/sss.2010.6.1.073
  21. Casciati, S. and Marzi, A. (2011), "Fatigue tests on SMA bars in span control", Eng. Struct., 33(4), 1232-1239. https://doi.org/10.1016/j.engstruct.2010.12.045
  22. Casciati, S. and Osman, A. (2005), "Damage assessment and retrofit study for the Luxor Memnon Colossi", Struct. Control Health Monit., 12(2), 139-159. https://doi.org/10.1002/stc.53
  23. Chrysostomou, C., Stassis, A., Demetriou, T. and Hamdaoui, K. (2008), "Application of shape memory alloy prestressing devices on an ancient aqueduct", Smart Struct. Syst., 4(2), 261-278. https://doi.org/10.12989/sss.2008.4.2.261
  24. Faravelli, L. (1988), "Stochastic modeling of the seismic excitation for dynamic purposes", Probabilist. Eng. Mech., 3(4), 189-195. https://doi.org/10.1016/0266-8920(88)90011-2
  25. Faravelli, L. and Marzi, A. (2010), "Coupling shape-memory alloy and embedded informatics toward a metallic self-healing material", Smart Struct. Syst., 6(9), 1041, 1056.
  26. Ghomari, F. (2010), La Ville de Mansourah, un Site Archeologique Classe, Magazine d'Architecture en Ligne. (In French)
  27. Hamdaoui, K. (2006), Historical monument health monitoring based on ambient vibrations, Master Thesis, Jordan University of Science and Technology, Irbid.
  28. Hamdaoui, K. (2009), Experimental applications on Cu-based shape memory alloys: retrofitting of historical monuments and base isolation, Ph.D Thesis, University of Pavia, Pavia.
  29. Harbit, M.Y. (2005), Patrimoine en pise: etude et modelisation, Master Thesis, University of Tlemcen. (In French)
  30. Kada, Y. (2001), Restitution du minaret de la mosquee de Mansourah par la methode de la photogrammetrie architecturale, Final Studies Project, University of Tlemcen. (In French)
  31. Kara Slimane, M.F. (2005), Etude du comportement mécanique du minaret de la mosquee de Mansourah par le code de calcul 3DEC, Final Studies Project, University of Tlemcen. (In French)
  32. Marcais, G. (1903), Les Monuments Arabe de Tlemcen, Ancien Libraire Thorin et Fils, Paris, France. (In French)
  33. Marcais, G. (1950), Les Villes d'Art Celebres: Tlemcen, H. Laurens, Paris, France. (In French)
  34. Matlab (computer program) (2004), The MathWorks Inc., www.mathworks.com.
  35. Mo'nis, H. (1981), Mosques, Word of Knowledge, Kuwait, Kuwait. (In Arabic)
  36. Ozbulut, O.E., Hurlebaus, S. and Desroches, R. (2011), "Seismic response control using shape memory alloys: a review", J. Intel. Mat. Syst. Str., 22,1531-1549. https://doi.org/10.1177/1045389X11411220
  37. RPA99 code (2003), Regles Parasismiques Algeriennes, Algeria. (In French)
  38. Saadat, S., Salichs, J., Noori, M., Hoo, Z., Davoodi, H., Bar-on, I., Suzuki, Y. and Masuda A. (2002), "An overview of vibration and seismic application of NiTi shape memory alloys", Smart Mater. Struct., 11(2), 218-229. https://doi.org/10.1088/0964-1726/11/2/305
  39. Sabetta, F. and Pugliese, A. (1996), "Estimation of response spectra and simulation of nonstationary earthquake ground motions", Bull. Seismological Soc. Am., 86(2), 337-352.
  40. Torra, V., Auguet, C., Isalgue, A., Carreras, G., Terriault, P. and Lovey, F.C. (2013), "Built in dampers for stayed cables in bridges via SMA. The SMARTeR-ESF project: a mesoscopic and macroscopic experimental analysis with numerical simulations", Eng. Struct., 49, 43-57. https://doi.org/10.1016/j.engstruct.2012.11.011
  41. Wenzel, H. and Pichler, D. (2005), Ambient Vibration Monitoring, John Wiley and Sons, Chichester, UK.
  42. WIND-CHIME 2004-2007, http://dipmec.unipv.it/chime/.

피인용 문헌

  1. Dynamic behavior of a seven century historical monument reinforced by shape memory alloy wires vol.23, pp.4, 2019, https://doi.org/10.12989/sss.2019.23.4.337
  2. Ambient vibration test and modelling of historical timber mosques after restoration vol.173, pp.12, 2020, https://doi.org/10.1680/jstbu.18.00088
  3. Numerical assessment of a slender structure damaged during October 30, 2020, İzmir earthquake in Turkey vol.19, pp.14, 2021, https://doi.org/10.1007/s10518-021-01197-8