Ocean Systems Engineering

  • 제4권1호
  • /
  • Pages.39-52
  • /
  • 2014
  • /
  • 2093-6702(pISSN)
  • /
  • 2093-677X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Dynamic analysis of three adjacent bodies in twin-barge floatover installation

  • Wang, Shuqing (Shandong Provincial Key Lab of Ocean Engineering, Ocean University of China) ;
  • Li, Xiliang (Shandong Tongzheng Design&Surveying Co., Ltd.)
  • 투고 : 2013.05.28
  • 심사 : 2014.01.16
  • 발행 : 2014.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

Floatover technology has been widely used in offshore installation, which has many substantial advantages compared with the traditional derrick barge. During the topside offloading of a twin-barge floatover installation, the transport barge is side by side moored between two floatover barges. In this paper, the twin-barge model with the connecting hawsers and pneumatic fenders is established. Coupled dynamic analysis is carried out to investigate the motions of the barges under wind, wave and current environments. Particular attention is paid to the effects on system responses with different frictional performance of fender, axial stiffness of the hawsers and environmental conditions. The research results can be used for optimizing the parameters of the system and reducing the risk of topside offloading.

키워드

참고문헌

  1. Chitrapu A.S. and Mordfin T.G. (2007), "Efficient time-domain simulation of side-by-side moored vessels advancing in waves", Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering, San Diego, California, USA, June.
  2. Choi, Y.R. and Hong, S.Y. (2002), "An analysis of hydrodynamic interaction of floating multi-body using higher-order boundary element method", Proceedings of the 12th International Offshore and Polar Engineering Conference, Kitakyushu, Japan, May.
  3. Edelson, D. and Luo, M. (2008), Kikeh development: spar topside floatover installation, Houston, Texas, U.S.A. OTC2008 -19639.
  4. Fang, M.C. and Chen, G.R. (2001), "The relative motion and wave elevation between two floating structures in waves", Proceedings of the 11th International Offshore and Polar Engineering Conference, Stavanger, Norway. June.
  5. Fang, M.C. and Chen, G.R. (2002), "On three-dimensional solutions of drift forces and moments between two ships in waves", J. Ship Res., 46(4), 280-288.
  6. Hong, S.Y., Kim, J.H., Cho, S.K., Choi, Y.R. and Kim, Y.S. (2005), "Numerical and experimental study on hydrodynamic interaction of side-by-side moored multiple vessels", Ocean Eng., 32(7), 783-801. https://doi.org/10.1016/j.oceaneng.2004.10.003
  7. ISO17357 (2002), "Ships and marine technology, high pressure floating pneumatic rubber fenders", International Standard.
  8. Inoue, Y. and Islam, M. (1999), "Comparative study of numerical simulation and the experimental results for a parallel connected FPSO and LNG in waves", Proceedings of the 9th International Offshore and Polar Engineering Conference, Goa, India, June.
  9. Inoue, Y. (2002), "A study of slowly varying drift forces on multi-body floating system", Proceedings of the 18th Interantional Conference on Offshore Mechanics and Arctic Engineering, Oslo, Norway, June.
  10. Kim, M.S. and Ha, M.K. (2002), "Prediction of motion responses between two offshore floating structures in waves", Ship Ocean Technol., 6(3), 13-25.
  11. Kim, M.H., Koo, B.J., Mercier, R.M. and Ward, E.G. (2005), "Vessel-mooring-riser coupled dynamic analysis of a turret-moored FPSO in deep water", Ocean Eng., 32(14-15), 1780-1802. https://doi.org/10.1016/j.oceaneng.2004.12.013
  12. Kodan, N. (1984), "The motions of adjacent floating structures in oblique waves", Proceedings of the 3rd International Conference on Offshore Mechanics and Arctic Engineering, New Orleans, USA, June.
  13. Koo, B.J. and Kim, M.H. (2005), "Motion analysis of two floating platform with mooring and hawser lines in tandem moored operation by combined matrix method and separated matrix", Ocean Eng. Technol., 19(5), 1-15.
  14. Koo, B.J. and Kim, M.H. (2005), "Hydrodynamic interactions and relative motions of two floating platforms with mooring lines in side-by-side offloading operation", Appl. Ocean Res., 27(6), 292-310. https://doi.org/10.1016/j.apor.2006.02.001
  15. OCIMF (2008), Mooing equipment guidelines, 3rd Ed.
  16. OCIMF (1994), Prediction of wind and current loads on VLCCs, 2nd Ed.
  17. Ohkusu, M. (1974), "Ship motion in vicinity of a structure", Proceedings of the International Conference on Behavior of Offshore Structure, NIT, Trondheim.
  18. Sun, L., Eatock Taylor, R. and Choo, Y.S. (2012),"Multi-body dynamic analysis of float-over installations", Ocean Eng., 51, 1-15. https://doi.org/10.1016/j.oceaneng.2012.05.017
  19. Sun, L., Teng, B. and liu, C.F. (2008), "Removing irregular frequencies by a partial discontinuous higher order boundary element method", Ocean Eng., 35(8-9), 920-930. https://doi.org/10.1016/j.oceaneng.2008.01.011
  20. Wang, Q. (2010), Analysis of multi-body responses in FPSO tandem offloading operation, The master thesis of Harbin Engineering University. Harbin, China (in Chinese).
  21. Wong, J. and Paton, C. (2007), "Feasibility stage assessment of side-by-side LNG offloading operation", Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering, San Diego, California, USA, June.
  22. Xu, X., Li, X., Lu, H., Xiao, L. and Yang, J. (2012), "An experimental and numerical study on motions of three adjacent barges in Floatover installation", Proceedings of the 22nd International Offshore and Polar Engineering Conference, Rhodes, Greece, June.